Microwave permeability change of FeCo nanocrystalline during high energy ball milling
Wang Wei , Guan Jianguo , Zhao Suling , Zhang Qiaoxin
Journal of Wuhan University of Technology Materials Science Edition ›› 2006, Vol. 21 ›› Issue (1) : 16 -18.
Microwave permeability change of FeCo nanocrystalline during high energy ball milling
The microwave magnetic properties of the ball milled FeCo particles were investigated as functions of ball milling time (t) using microwave electromagnetic parameters analysis techniques. The results show that the imaginary part of intrinsic dynamic permeability (μi) of the ball-milled particles is much bigger than that of raw powders. μi strongly depends on t and exhibits several slightly damped ferromagnetic resonances. These phenomena are in qualitative agreement with the formation of the corresponding microstructure or the Aharoni s model of non-uniform exchange resonance modes. The present microwave permeability behavior indicates that nanocrystalline materials with the same grain size may exhibit different properties that depend upon the microstructure, which provides a possibility for manufacturing high performance microwave absorber.
high energy ball milling / carbonyl iron / cobalt / alloy / nanocrystalline / microwave electromagnetic parameters
| [1] |
|
| [2] |
|
| [3] |
|
| [4] |
|
| [5] |
Q Wang,W Wang, J G Guan, and Q J Zhang. XRD and HRTEM Analyses on of the Ball Milled Nanocrystalline FeCo Alloy.J. Wuhan Univ. Technol.-Mater. Sci. Ed.,(Accepted,2005) |
| [6] |
|
| [7] |
|
| [8] |
|
| [9] |
|
| [10] |
|
/
| 〈 |
|
〉 |