Electroplating Zn-Al alloy technology

Duan You-gou; Fu Wei-chang; Peng Qing-jing

doi:10.1007/BF02838540

Journal of Wuhan University of Technology Materials Science Edition ›› 2002, Vol. 17 ›› Issue (3) : 54 -55. DOI: 10.1007/BF02838540

Article

Electroplating Zn-Al alloy technology

Author information +

History +

PDF

Abstract

The method of controlling separating anode and separating power source was used to perform orthogonal optimization for the parameters in electroplating Zn-Al alloy. The electroplating Zn-Al alloy technology was decided, in which the content of Al is about 12%–15%.

Keywords

electroplating / Zn-Al alloy / separating anode

Cite this article

Download citation ▾

Duan You-gou, Fu Wei-chang, Peng Qing-jing. Electroplating Zn-Al alloy technology. Journal of Wuhan University of Technology Materials Science Edition, 2002, 17(3): 54-55 DOI:10.1007/BF02838540

登录浏览全文

4963

注册一个新账户忘记密码

References

Publishing order | Descend order by publishing year | Descend order by cited within

[1]	Qing Li. Explorement and Use Expanding of Alloy Cladding Material. Electroplating and Pollution Control, 1996, 16(3): 9-10.

[2]	Hualiang Zeng, Da Wu Zhong, Wen Qing Yue, . Handbook of Electroplating Technology, 1989, Beijing: The Publishing House of Michanical Industry.

[3]	Zhenmi Tu. Principle and Technology of Electroplating Alloy, 1993, Beijing: The Publishing House of National Defense Industry, 214-218.

[4]	Qing Lin, Feng Zhang, Bolin Wu, . The Wear Performances of Fine Grained Alumina Balls. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2000, 15(4): 66-66.

[5]	Xin Huang, Runzhang Yuan. Developing a New Generation of High Performance Composite. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2000, 15(3): 73-73.