Diffusion models for solid-state homogenization of dendrite segregation

Zhang Dingfei; Peng Jian

doi:10.1007/BF02838505

Journal of Wuhan University of Technology Materials Science Edition ›› 2005, Vol. 20 ›› Issue (2) : 111 -114. DOI: 10.1007/BF02838505

Article

Diffusion models for solid-state homogenization of dendrite segregation

Zhang Dingfei ¹^,^a
, Peng Jian ¹

Author information +

History +

PDF

Abstract

New mathematical diffusion models for solid state homogenization of dendrite segregation were presented to calculate the concentration evolution of alloying elements during solid-state homogenization of dendrite segregation in any cross section of a three-dimensional dendrite system. With mathematical accumulation, all the individual concentration profiles of every dendrite can be accumulated to form a concentration equation, which may be required by sine model or not. Then diffusion homogenization processes for any cross sections of dendrites in solid state can be calculated from the equation. The only assumption of the new models was that any individual concentration profile in a dendrite system could be simulated by Gauss equation of Fick-2 law.

Keywords

diffusion / model / homogenization / dendrite segragation

Cite this article

Download citation ▾

Zhang Dingfei, Peng Jian. Diffusion models for solid-state homogenization of dendrite segregation. Journal of Wuhan University of Technology Materials Science Edition, 2005, 20(2): 111-114 DOI:10.1007/BF02838505

登录浏览全文

4963

注册一个新账户忘记密码

References

Publishing order | Descend order by publishing year | Descend order by cited within

[1]	Crank J. The Mathematics of Diffusion, 1959 London: Oxford at the Clarendon Press. 10-120.

[2]	Hunt J D. Solidification and Casting of Metals, 1979 London: Metal Society. 3-4.

[3]	Kurz W, Fisher D J. Dendrite Growth at the Limit of Stability: Tip Radius and Spacing. Acta Meta, 1981, 29: 11-20.

[4]	Kobayashi S. Solute Redistribution during Solidification with Diffusion in Solid Phase: A Theoretical Analysis. J. Cryst. Growth, 1988, 88: 87-96.

[5]	Allen C M, Cantor B. Effect of Semisolid Microstructure on Solidified Phase Content in 1xxx Al Alloys. Acta Materialia, 2001, 49(5): 1549-1563.

[6]	Qifan Zhu, Congxiang Wang. Quality Control on the Austenitic-bainitic Ductile Iron Gear. J. Wuhan University of Technology—Mater. Sci. Ed., 2000, 15: 43-48.

[7]	Cahn R W. Physical Metallury, 1970 Holland: North-Holland Publishing Company. 388-390.

[8]	Nastac L. Numerical Modeling of Solidification Morphologies and Segregation Patterns in Cast Dendritic Alloys. Acta Materialia, 1999, 47(11): 4253-4262.