Vacuum infusion molding process (Part 2 VIMP based on grooves)

Zhu Ying-dan; Deng Jing-lan; Wang Ji-hui; Tan Hua

doi:10.1007/BF02838396

Journal of Wuhan University of Technology Materials Science Edition ›› 2003, Vol. 18 ›› Issue (4) : 68 -71. DOI: 10.1007/BF02838396

Article

Vacuum infusion molding process (Part 2 VIMP based on grooves)

Author information +

History +

PDF

Abstract

The optimal parameters for flow grooves and supply grooves were determined by a series of experiments, and the influences of various molding conditions on the mold filling process were analyzed. Furthermore, the whole VIMP procedure based on grooves was introduced in detail taking the manufacture of a sandwich panel as an example.

Keywords

vacuum infusion molding process / grooves / mold filling

Cite this article

Download citation ▾

Zhu Ying-dan, Deng Jing-lan, Wang Ji-hui, Tan Hua. Vacuum infusion molding process (Part 2 VIMP based on grooves). Journal of Wuhan University of Technology Materials Science Edition, 2003, 18(4): 68-71 DOI:10.1007/BF02838396

登录浏览全文

4963

注册一个新账户忘记密码

References

Publishing order | Descend order by publishing year | Descend order by cited within

[1]	Rigas Elias J, Walsh Shawn M, Spurgeon William A. Development of a Novel Processing Technique for Vacuum Assisted Resin Transfer Molding (VARTM). SAMPLE, 2001, 6–10: 1086-1086.

[2]	Ni Jun, Li Shoujie, Sun Xiudong, Lee L James. Mold Filling Analysis in Vacuum-Assisted Resin Transfer Molding. Polymer Composites, 1998, 19(6): 818-829.

[3]	Yingdan Zhu, Jihui Wang, Zui Yang, Hua Tan. Vacuum Infusion Molding Process Part 1: VIMP Based on a High-Permeable Medium. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2003, 18(3): 72-77.

[4]	Xinhua Li, Yingdan Zhu, Jihui Wang, Guoqiang Gao. Study on the UP Resin of VIMP. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2002, 24(8): 1-4.