Spark plasma sintering properties of ultrafine Ti(C,N)-based cermet

Abstract

Ultrafine Ti(C,N)-based cermet was sintered by SPS from 1050°C to 1450°C and its sintering properties, such as porosity, mechanical properties and phase transformation, were investigated by optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffraction (XRD), and differential scanning calorimeter (DSC). It is found that the spark plasma sintering properties of Ti(C,N)-based cermet differ from those of conventional vacuum sintering. The liquid phase appearance is at least lower by 150°C than that in vacuum sintering. The porosity decreases sharply below 1 200°C and reaches minimum at 1 200°C, and afterwards it almost keeps invariable and no longer increases. SPS remarkably accelerates the phase transformation of Ti(C,N)-based cermet and it has a powerful ability to remove oxides in Ti(C,N)-based cermets. Above 1 350°C, denitrification occurred. Fresh graphite phase formed above 1 430°C. Both the porosity and graphite are responsible for the poor TRS.

Keywords

Ti(C,N)-based cermets / ultrafine cermet / spark plasma sintering (SPS) / sinterability / densification / deoxidation / denitrification

References

[1] Omori Mamoru. Sintering, Consolidation, Reaction and Crystal Growth by the Spark Plasma System (SPS). Materials Science and Engineering, 2000, 287: 183-183.

[2] Yamazaki K, Risbud S H, Aoyama H, Shoda K. PAS (Plasma Activated Sintering): Transient Sintering Process Control for Rapid Consolidation of Powders. Journal of Materials Processing Technology, 1996, 56: 955-955.

[3] Gao L, Miyamoto H. Spark Plasma Sintering Techlogy. J. Inorganic. Mater., 1997, 12: 128-128.

[4] Hensly J E, Risbud S H, Groza R. Plasma Activated Sintering Aluminium Nitride. Journal of Materials Engineering and Performance, 1993, 2(5): 665-665.

[5] Yoshimura M, Ohji T, Sando M. Synthesis of Nanograined ZrO₂-based Composites by Chemical Processing and Pulse Electric Current Sintering. Materials Letters, 1999, 38: 18-18.

[6] Mei Bignchu, . Hardness Measurement of (TiB₂−TiAl)/TiN Sysmatically Function Graient Materials. Journal of Wuhan University of Technology—Mater. Sci. Ed., 2002, 17(1): 1-1.

[7] Akira Kawasaki, Ryuzo Watanabe, Tae Young Um. Fabrication of Cu/Al₂O₃/Cu Symmetrical Functionally Graded Material by Spark Plasma Sintering Process. Journal of the Japan Society of Powder and Powder Metallurgy, 1998, 45(3): 220-220.

[8] Shon I J, Munir Z A, Yamazaki K, Shoda K. Simultaneous Synthesis and Densification of MoSi₂ by Field-activated Combustion. Journal of the American Ceramic Society, 1996, 79(7): 1875-1875.

[9] Shigeaki Sugiyama, Koichi Asari, Hitoshi Taimatsu. Synthesis of TiB₂−Ti(CN) Composites by Reactive Spark Plasma Sintering. Journal of the Japan Society of Powder and Powder Metallurgy, 2000, 47(3): 308-308.

[10] Gao L, Hong J S, Miyamoto H, Torre S D D L. Bending Strength and Microstructure of Al₂O₃ Ceramics Densified by Spark Plasma Sintering. Journal of the European Ceramic Society, 2000, 20: 2149-2149.

[11] Li W, Gao L. Rapid Sintering of Nanocrystalline ZrO₂ (3Y) by Spark Plasma Sintering. Journal of the European Ceramic Society, 2000, 20: 2441-2441.

[12] Tracey V A. Nickel in Hard Metals. Refractory Metals and Hard Materials, 1992, 11: 137-137.

[13] Ttmayer P E, Kolaska H, Lengauer W, Dreyer K. Ti(C,N)— Metallurgy and Properties. International Journal of Refractory Metals and Hard Materials, 1995, 13: 343-343.

[14] Chen Limin, . Fundamentals of Liquid Sintering for Modern Cermets and Functionally Graded Cemented Carbonitrides (FGCC). International Journal of Refractory Metals and Hard Materials, 2000, 18: 307-307.

[15] Yoshimura Sugizawa T, Nishigaki K, Doi H. Reaction Occurring During Sintered and the Characteristics of TiC-20TiN-15WC-10TaC-9Mo-5.5Ni-11Co Cermet. International Journal of Refractory Metals and Hard Materials, 1983, 2(4): 170-170.