MRO Configuration Management for Complex Products

Abstract

Configuration management (CM) is an effective method for data modeling and change management in product development, but the study of how it can be adapted for complex product maintenance, repair and overhaul (MRO) has thus far been superficial. Research propositions are put forward on the basis of a literature review and verified by a case of a high-speed train MRO company. The findings show that CM can be used in MRO data management with adjustments in its functions. First, MRO-CM planning considers both multistage service and single-stage service to keep data consistent and continuous. Second, MRO data integration with the design/production phase should be considered during configuration identification. Third, baselines and change rules are developed for change control. Finally, status accounting and auditing can be repeatedly used in MRO data management. A systematic MRO-CM framework is generated to assist MRO practitioners in understanding the relationships among different MRO-CM functions. This paper contributes to expanding the theory of CM in MRO for complex products and provides an effective method for managing MRO data from systematic engineering insights.

Keywords

Configuration management / MRO Service / data management / case study

References

[1] America National Standard Institute (2001). National consensus standard for configuration management, EIA-649-A, ANSI.

[2] Abramovici M, Gobel JC, Savarino P. Reconfiguration of smart products during their use phase based on virtual product twins. CIRP Annals, 2017, 66(1): 165-168.

[3] British Standards Institution (2003). Quality management systems: Guidelines for configuration management. ISO10007, BSI.

[4] Burgess T F, McKee D, Kidd C. Configuration management in the aerospace industry: A review of industry practice. International Journal of Operations & Production Management, 2005, 25(3): 290-301.

[5] Brown D C. Defining configuring. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 1998, 12(4): 301-305.

[6] Choi I, Bae S. An architecture for active product configuration management in industrial virtual enterprises. International Journal of Advanced Manufacturing Technology, 2001, 18(2): 133-139.

[7] Department of Defense (2001). Military Handbook: Configuration Management Guidance, MIL-HDBK-61A(SE). Washington DC, USA.

[8] Eisenhardt K M. Building theories from case study research. The Academy of Management Review, 1989, 14(4): 532-550.

[9] Eisenhardt K M, Graebner M E. Theory building from cases: Opportunities and challenges. Academy of Management Journal, 2007, 50(1): 25-32.

[10] Espindola DB, Fumagalli L, Garetti M, Pereira CE, Botelho SS, Henriques RV. A model-based approach for data integration to improve maintenance management by mixed reality. Computers in Industry, 2013, 64(4): 376-391.

[11] Espinosa E, Teresita Acuna S, Vegas S, Juristo N. Adopting configuration management principles for managing experiment materials in families of experiments. Information and Software Technology, 2019, 113(9): 39-67.

[12] Fowler A. Models and applications of configuration management. Omega, 1993, 21(4): 425-431.

[13] Framling K, Harrison M, Brusey J, Petrow J. Requirements on unique identifiers for managing product lifecycle information: Comparison of alternative approaches. International Journal of Computer Integrated Manufacturing, 2007, 20(7): 715-726.

[14] Friedrich G, Ryabokon A, Falkner AA, Haselbock A, Schenner G, Schreiner H. (Re)configuration based on model generation. Electronic Proceedings in Theoretical Computer Science, 2011, 65: 26-35.

[15] Gain U. Applying frameworks for cognitive services in IIoT. Journal of Systems Science and Systems Engineering, 2021, 30(1): 59-84.

[16] Guajardo JA, Cohen MA. Service differentiation and operating segments: A framework and an application to after-sales services. Manufacturing Service Operations Management, 2018, 20(3): 440-454.

[17] Group A (2007). The Configuration Management Benchmark Report - Formalizing and Extending CM to Drive Quality. Aberdeen Group.

[18] Haug A, Shafiee S, Hvam L. The causes of product configuration project failure. Computers in Industry, 2019, 108: 121-131.

[19] Haug A, Shafiee S, Hvam L. The costs and benefits of product configuration projects in engineer-to-order companies. Computers in Industry, 2019, 105: 133-142.

[20] International Atomic Energy Agency (2010). Application of configuration management in nuclear power plants. Safety Reports Series 65.

[21] Jarratt TAW, Eckert CM, Caldwell NH, Clarkson PJ. Engineering change: An overview and perspective on the literature. Research in Engineering Design, 2011, 22(2): 103-124.

[22] Jiao Y, Yang Y. A product configuration approach based on online data. Journal of Intelligent Manufacturing, 2019, 30: 2473-2487.

[23] Jun H, Kiritsis D, Xirouchakis P. Research issues on closed-loop PLM. Computers in Industry, 2007, 58(8): 855-868.

[24] Kang M Y, Jeong Y, Jung Y. Assessment methodology of practical configuration management (CM) for sustainable nuclear power plants (NPPS). Sustainability, 2019, 113(8): 39-67.

[25] Kossmann M, Samhan A, Odeh M, Qaddoumi E, Tbakhi A G, Watts S (2020). Extending the scope of configuration management for the development and life cycle support of systems of systems — An ontology-driven framework applied to the Enceladus Submarine Exploration Lander. Systems Engineering. DOI:https://doi.org/10.1002/sys.21532.

[26] Kuhlenkotter B, Wilkens U, Bender B, Abramovici M, Sue T, Gobel J, Herzog M, Hypki A, Lenkenhoff K. New perspectives for generating smart PSS solutions-life cycle, methodologies, and transformation. Procedia CIRP, 2017, 64: 217-222.

[27] Lee S G, Ma Y S, Thimm G L, Verstraeten J. Product lifecycle management in aviation maintenance, repair and overhaul. Computers in Industry, 2008, 59(2–3): 296-303.

[28] Li J, Tao F, Cheng Y, Zhao L. Big Data in product life-cycle management. The International Journal of Advanced Manufacturing Technology, 2015, 81(1–4): 667-684.

[29] Li Q, Feng D, Mei Z. Aircraft configuration management and retrospective in life cycle. Computer Integrated Manufacturing Systems, 2016, 22(2): 476-481.

[30] Li H, Ji Y, Luo G, Mi S. A modular structure data modeling method for generalized products. The International Journal of Advanced Manufacturing Technology, 2016, 84(1–4): 197-212.

[31] Liu M, Lai J, Shen W. A method for transformation of engineering bill of materials to maintenance bill of materials. Robotics and Computer-Integrated Manufacturing, 2014, 30(2): 142-149.

[32] Lyu G, Chu X, Xue D. Product modeling from knowledge, distributed computing and lifecycle perspectives: A literature review. Computers in Industry, 2017, 84: 1-13.

[33] Mannisto T, Peltonen H, Soininen T, Sulonen R. Multiple abstraction levels in modelling product structures. Data & Knowledge Engineering, 2001, 36(1): 5-78.

[34] Mannisto T, Soininen T, Tiihonen J, Sulonen R (1999). Framework and conceptual model for reconfiguration. In Proceedings of the AAAI 1999.

[35] McDermott J. R1: A rule-based configurer of computer systems. Artificial Intelligence, 1982, 19(1): 39-88.

[36] Mittal S, Frayman F. Towards a generic model of configuration tasks. IJCAI, 1989, 89: 1395-1401.

[37] Muller P. Configuration management: A core competence for successful through-life systems engineering and engineering services. Procedia CIRP, 2013, 11: 187-192.

[38] Myrodia A, Kristjansdottir K, Hvam L. Impact of product configuration systems on product profitability and costing accuracy. Computers in Industry, 2017, 88: 12-18.

[39] Phelan K T, Summers J D, Kurz M E, Wilson C, Pearce B W, Schulte J, Knackstedt S. Configuration and options management processes and tools: An automotive OEM case study. Journal of Manufacturing Technology Management, 2017, 28(2): 146-168.

[40] Pintelon L, Du Preez N, Van Puyvelde F. Information technology: opportunities for maintenance management. Journal of Quality in Maintenance Engineering, 1999, 5(1): 9-24.

[41] Quigley J M, Robertson K L (2015). Configuration Management: Theory, Practice, and Application. Auerbach Publications.

[42] Ren G, Zhang J, Zhang L, Wang J. Information resource organizing-oriented design and analyzing of maintenance BOM. Computer Integrated Manufacturing Systems, 2010, 16(7): 1545-1551.

[43] Ren G, Zhang L, Wang J (2009). Organizing complex equipments MRO data with the BOM structure. In 2009 WASE International Conference on Information Engineering 1: 540–543.

[44] Roy R, Stark R, Tracht K, Takata S, Mori M. Continuous maintenance and the future — Foundations and technological challenges. CIRP Annals, 2016, 65(2): 667-688.

[45] Saaksvuori A, Immonen A (2008). Product Lifecycle Management. Springer Science & Business Media.

[46] Shafiee S, Hvam L, Haug A, Dam M, Kristjansdottir K. The documentation of product configuration systems: A framework and an IT solution. Advanced Engineering Informatics, 2017, 32: 163-175.

[47] Stark R, Grosser H, Muller P. Product analysis automation for digital MRO based on intelligent 3D data acquisition. CIRP Annals, 2013, 62(1): 123-126.

[48] Stark J. Product Lifecycle Management — 21 century Paradigm for Product Realisation (Vol 1), 2015, Switzerland: Springer International Publishing

[49] Soininen T, Tiihonen J, Mannisto T, Sulonen R. Towards a general ontology of configuration. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 1998, 12: 357-372.

[50] Sun H, Liu Y, Sakao T, Wang Z. Configuring use-oriented aero-engine overhaul service with multi-objective optimization for environmental sustainability. Journal of Cleaner Production, 2017, 192: S94-S106.

[51] Sun Y, Chen X, Ren H, Jin Y, Liu Q. Ordering decision-making methods on spare parts for a new aircraft fleet based on a two-sample prediction. Reliability Engineering & System Safety, 2016, 156: 40-50.

[52] Sun H, Chang Z. An approach to configuration management in the aero-engine overhaul process. Aircraft Engineering and Aerospace Technology, 2018, 2(90): 418-426.

[53] Tao F, Cheng J, Qi Q, Zhang M, Zhang H, Sui F. Digital twin-driven product design, manufacturing and service with big data. The International Journal of Advanced Manufacturing Technology, 2018, 94(9–12): 3563-3576.

[54] Tekin E. A method for traceability and as-built product structure in aerospace industry. Procedia CIRP, 2014, 17: 351-355.

[55] Wan S, Li D, Gao J, Roy R, Tong Y. Process and knowledge management in a collaborative maintenance planning system for high value machine tools. Computers in Industry, 2017, 84: 14-24.

[56] Watts F B (2015). Configuration Management for Senior Managers: Essential Product Configuration and Lifecycle Management for Manufacturing. Butterworth-Heinemann.

[57] Watts F B (2018). Engineering Documentation Control/Configuration Management Standards Manual. Wiley-Scrivener.

[58] Whyte J, Stasis A, Lindkvist C. Managing change in the delivery of complex projects: Configuration management, asset information and big data. International Journal of Project Management, 2016, 34(2): 339-351.

[59] Wu W, Fang L, Wang W, Yu M, Kao H. An advanced CMII-based engineering change management framework: The integration of PLM and ERP perspectives. International Journal of Production Research, 2014, 52(20): 6092-6109.

[60] Wuest T, Hribernik K, Thoben K D. Accessing servitisation potential of PLM data by applying the product avatar concept. Production Planning & Control, 2015, 26(14–15): 1198-1218.

[61] Wuest T, Nana UMN. State-based representation of a product’s middle of life. International Journal of Product Lifecycle Management, 2016, 9(2): 108-138.

[62] Xu L, Wang Y, Zhu M, Jiang J. Research on the classification of EMU system and parts. Railway Quality Control, 2015, 43(6): 32-34 37. (In Chinese)

[63] Xu Y, Malisetty M K, Round M. Configuration management in aerospace industry. Procedia CIRP, 2013, 11: 183-186.

[64] Yang N, Zhang M, Wangdu F, Li R. Identification of critical components of complex product based on hybrid intuitionistic fuzzy set and improved Mahalanobis-Taguchi System. Journal of Systems Science and Systems Engineering, 2021, 30(5): 533-551.

[65] Yin R K (2018). Case Study Research and Applications — Design and Methods(6ed). SAGE Publications.

[66] Zhang LL. Product configuration: A review of the state-of-the-art and future research. International Journal of Production Research, 2014, 52(21): 6381-6398.

[67] Zhang Y, Zhang L. Organizing complex engineering operations throughout the lifecycle: A service-centred view and case studies. Journal of Service Management, 2014, 25(5): 580-602.

[68] Zhang LL, Vareilles E, Aldanondo M. Generic bill of functions, materials, and operations for SAP2 configuration. International Journal of Production Research, 2013, 51(2): 465-478.

[69] Zhang Z, Liu G, Jiang Z, Chen Y. A cloud-based framework for lean maintenance, repair, and overhaul of complex equipment. Journal of Manufacturing Science and Engineering, 2015, 137(4): 1-11.

[70] Zhang M, Zheng J, Li GX, Zhang K. Performance prediction of a modular product variant with RS-SVM. Procedia CIRP, 2019, 79: 495-499.

[71] Zhou C, Liu X, Xue F, Bo H, Li K. Research on static service BOM transformation for complex products. Advanced Engineering Informatics, 2018, 36: 146-162.

[72] Zhu H, Gao J, Li D, Tang D. A Web-based Product Service System for aerospace maintenance, repair and overhaul services. Computers in Industry, 2012, 63(4): 338-348.