Buckling of Multiple Intersecting Spherical Shells Under Uniform External Pressure

Abstract

This study explored the buckling of multiple intersecting spherical shells. A three-segment spherical shell was designed using the theory of deformation coordination; the design was compared with that of a volume-equivalent cylindrical shell and ring-ribbed cylindrical shell. The numerical results indicated that the buckling capacity of the three-segment spherical shell was superior to those of the other two cylindrical shells. To validate our numerical approach, three laboratory-scale shell models were fabricated. Each model was accurately measured and slowly tested in a pressure chamber; thus, the tested shells were studied numerically. The experimental collapse modes agreed well with numerical results, and the collapse load of the three-segment pressure shell was considerably higher than that of the two cylindrical shells.

Keywords

Multi-segment spherical shell / Cylindrical shell / External pressure / Buckling

References

[1] Arbocz J, Starnes JH. Future directions and challenges in shell stability analysis. Thin-Walled Struct, 2002, 40(9): 729-754

[2] Błachut J. Experimental perspective on the buckling of pressure vessel components. Appl Mech Rev, 2014, 66(1): 010803

[3] Błachut J, Jaiswal OR. On buckling of toroidal shells under external pressure. Comput Struct, 2000, 77(3): 233-251

[4] Błachut J, Magnucki K. Strength, stability, and optimization of pressure vessels: review of selected problems. Appl Mech Rev, 2008, 61(6): 060801

[5] Błachut J, Smith P. Buckling of multi-segment underwater pressure hull. Ocean Eng, 2008, 35(2): 247-260

[6] Castro SGP, Zimmermann R, Arbelo MA, Khakimova R, Hilburger MW, Degenhardt R. Geometric imperfections and lower-bound methods used to calculate knock-down factors for axially copressed composite cylindrical shells. Thin-Walled Struct, 2014, 74: 118-132

[7] Charles Garland B. Design and fabrication of deep-diving submersible pressure hulls. SNAME Trans, 1968, 76: 161-179

[8] China Classification Society (CCS) (2013) Rules for the classification and construction of diving systems and submersibles

[9] Eurocode CEN (2007) 3–design of steel structures – part 1–6: strength and stability of shell structures. Brussels Eur Comm Stand

[10] Gou P, Cui WC. Structural optimization of multiple intersecting spherical pressure hulls based on Kriging model. J Sh Mech, 2009, 13(1): 100-106 (in Chinese)

[11] Hall J, Leon G, Kelly J (1991) Deep submergence design of intersecting composite spheres. In composites-design, manufacture and applications, SAMPE. 2F1-2F12

[12] Jasion P, Magnucki K. Elastic buckling of Cassini ovaloidal shells under external pressure - theoretical study. Arch Mech, 2015, 67(2): 179-192

[13] Leon G. Intersecting titanium spheres for deep submersibles. J Eng Mech Div, 1971, 97(3): 981-1006

[14] Liang XX (2006) Study on special problem of submarine pressure hull. Ph.D. thesis, Harbin Engineering University, Harbin

[15] Liang CC, Shiah SW, Jen CY, Chen HW. Optimum design of multiple intersecting spheres deep-submerged pressure hull. Ocean Eng, 2004, 31(2): 177-199

[16] Ness CC, Simpson WM Jr. A new submarine paradigm. Nav Eng J, 2009, 112(4): 143-152

[17] Pan BB, Cui WC. An overview of buckling and ultimate strength of spherical pressure hull under external pressure. Mar Struct, 2010, 23(3): 227-240

[18] Pan BB, Cui WC. A comparison of different rules for the spherical pressure hull of deep manned submersibles. J Sh Mech, 2011, 15(3): 276-285

[19] Ross CTF. A conceptual design of an underwater vehicle. Ocean Eng, 2006, 33(16): 2087-2104

[20] Ross CTF, Terry A, Little APF. A design chart for the plastic collapse of corrugated cylinders under external pressure. Ocean Eng, 2001, 28(3): 263-277

[21] Stanley IW (2012) Department of precision and microsystems engineering on lightweight design of submarine pressure hull. PhD thesis, Delft University Technology, Holland

[22] Zhang M, Tang WX, Wang F, Zhang J, Cui WC, Chen Y. Buckling of bi-segment spherical shells under hydrostatic external pressure. Thin-Walled Struct, 2017, 120: 1-8

[23] Zhang J, Zuo XL, Wang WB, Tang WX, Li HY. Design and buckling analysis of double-segment egg-shaped pressure hulls. J Sh Mech, 2018, 22(11): 1396-1406 in Chinese)

[24] Zingoni A. Liquid-containment shells of revolution: a review of recent studies on strength, stability and dynamics. Thin-Walled Struct, 2015, 87: 102-114

[25] Zuo XL, Wang WB, Tang WX, Tang W. Overviews of investigation on submersible pressure hulls. Adv Nat Sci, 2014, 7(4): 54-61