Influence of texture and oriented LPSO phase on mechanical anisotropy of cylindrical Mg-Gd-Y-Zn-Zr alloy component manufactured via back-extrusion

Abstract

To elucidate the origin of mechanical anisotropy in cylindrical Mg alloy components containing long-periodic stacking-ordered (LPSO) phases and to provide guidance for component-level microstructure design, this study systematically investigated the combined effects of texture and oriented LPSO phases on the three-dimensional mechanical anisotropy of a cylindrical Mg-Gd-Y-Zn-Zr components fabricated by back-extrusion. The results of uniaxial tensile tests show that there are significant differences in three-dimensional mechanical properties of cylindrical components, and the plastic anisotropy is more significant compared to the strength anisotropy. By comparing Schmid factor (SF) distribution and slip mode of primary-texture and secondary-texture, it is revealed that primary-texture grains have a greater influence on strength anisotropy than secondary-texture grains. The larger SF difference between primary-texture grains and secondary-texture grains leads to significant gradient slip, uncoordinated strain and dislocation accumulation, which results in stronger dislocation strengthening, strain strengthening, and strength anisotropy. The fracture of blocky LPSO phases leads to straight cleavage planes, and the matrix is prone to the formation of numerous tearing ridges. The oriented blocky LPSO phase affects the strength anisotropy through load-bearing strengthening effect, and affects the plastic anisotropy by changing microcrack propagation mode and fracture mechanism. Overall, the oriented blocky LPSO phase has a more significant effect on mechanical anisotropy than the texture.

Keywords

magnesium alloy / texture / LPSO phase / mechanical anisotropy / cylindrical component

References

[1] Li M, Huang Y-c, Liu Y, et al.. Effects of heat treatment before extrusion on dynamic recrystallization behavior, texture and mechanical properties of as-extruded Mg-Gd-Y-Zn-Zr alloy. Materials Science and Engineering: A, 2022, 832: 142479 J]

[2] Zhou X-j, Xiong W-y, Zeng G, et al.. Combined effects of LPSO orientation and α-Mg texture on tensile anisotropy of an extruded Mg-Gd-Y-Zn-Zr alloy. Materials Science and Engineering: A, 2021, 805: 140596 J]

[3] Wang Z-x, Zheng J, Jia L-c, et al.. Abnormal texture formation and mechanical anisotropy of pre-aging extruded Mg-Gd-Y-Zn-Zr alloy with large-scale. Journal of Materials Research and Technology, 2022, 20: 2771-2783 J]

[4] Li J-y, Wang F-l, Zeng J, et al.. Decreasing the mechanical anisotropy of the forged Mg-8.5Gd-2.5Y-1.5Zn-0.5Zr alloy by modulating blocky LPSO particles using multi-directional forging. Journal of Magnesium and Alloys, 2025, 13(4): 1495-1505 J]

[5] Li D-d, Le Q-c, Zhou X, et al.. Study on the low mechanical anisotropy of extruded Mg-Zn-Mn-Ce-Ca alloy tube in the compression process. Journal of Magnesium and Alloys, 2024, 12(3): 1054-1067 J]

[6] Yao Y, Liu C-m, Wan Y-c, et al.. Microstructure, texture and mechanical anisotropy of Mg-Gd-Y-Zr sheets processed via different rolling routes and reductions. Materials Characterization, 2020, 161: 110120 J]

[7] Shi B Q, Zhang R D, Shang X L, et al.. Reducing mechanical anisotropy by formation of symmetrical ring-like texture via final-pass heavy reduction rolling in Mg alloy. Journal of Materials Research and Technology, 2023, 24: 4315-4328 J]

[8] Shi B Q, Zhao L Y, Shang X L, et al.. Reduction effect of final-pass heavy reduction rolling on the texture development, tensile property and stretch formability of ZWK100 alloy plates. Journal of Materials Science & Technology, 2022, 111: 211-223 J]

[9] Liu S, Wang C, Ning H, et al.. Achieving high ductility and low in-plane anisotropy in magnesium alloy through a novel texture design strategy. Journal of Magnesium and Alloys, 2024, 12(7): 2863-2873 J]

[10] Li D-d, Le Q-c, Hu C-l, et al.. The influence of initial texture, microstructure and deformation behavior on the low mechanical anisotropy of extruded Mg alloy tube. Journal of Materials Research and Technology, 2022, 20: 3485-3498 J]

[11] Sun J, Jin L, Dong S, et al.. A combined electron backscattered diffraction and visco-plastic self-consistent analysis on the anisotropic deformation behavior in a Mg-Gd-Y alloy. Materials & Design, 2017, 122: 164-171 J]

[12] Huang X-d, Xin Y-c, Cao Y, et al.. A quantitative study on planar mechanical anisotropy of a Mg-2Zn-1Ca alloy. Journal of Materials Science & Technology, 2022, 109: 30-48 J]

[13] Li Z-c, Yu J-m, Lu D-l, et al.. Synergistic effects of grain refinement and texture weakening on mechanical properties anisotropy of Mg-9Gd-4Y-2Zn-0.4Zr alloy via RUE processing. Journal of Materials Research and Technology, 2022, 19: 837-857 J]

[14] Zhang D-d, Pan H-c, He Z-x, et al.. Mechanical anisotropy and microstructural heterogeneity of a free-forged ME20 alloy with a large cross section. Materials Science and Engineering: A, 2023, 863: 144551 J]

[15] Shen T-y, Liu H, Zhang J-l, et al.. The improvement on mechanical anisotropy of AZ31 magnesium alloy sheets by multi cross-rolling process. Journal of Alloys and Compounds, 2023, 963: 171252 J]

[16] Chen H, Han Y-x, Liu C-m, et al.. Effect of unidirectional rolling and cross-rolling on microstructure and mechanical anisotropy of Mg-Gd-Y-Ag-Zr plates. Journal of Alloys and Compounds, 2023, 960: 170680 J]

[17] Chen T, Chen Z-y, Shao J-b, et al.. The role of long-period stacking ordered phases in the deformation behavior of a strong textured Mg-Zn-Gd-Y-Zr alloy sheet processed by hot extrusion. Materials Science and Engineering: A, 2019, 750: 31-39 J]

[18] Peng J-h, Zhang Z, Chen H-h, et al.. Investigation on the anisotropy of mechanical properties along different orientations of an AZ31 hot-extrusion bar. Journal of Alloys and Compounds, 2021, 854: 157108 J]

[19] Khan A S, Pandey A, Gnäupel-Herold T, et al.. Mechanical response and texture evolution of AZ31 alloy at large strains for different strain rates and temperatures. International Journal of Plasticity, 2011, 27(5): 688-706 J]

[20] Yu H-h, Li C-z, Xin Y-c, et al.. The mechanism for the high dependence of the Hall-Petch slope for twinning/slip on texture in Mg alloys. Acta Materialia, 2017, 128: 313-326 J]

[21] Dong B-b, Che X, Wang Q, et al.. Refining the microstructure and modifying the texture of the AZ80 alloy cylindrical tube by the rotating backward extrusion with different rotating revolutions. Journal of Alloys and Compounds, 2020, 836: 155442 J]

[22] Wang X, Li M, Huang Y-c, et al.. Deformation behavior of LPSO phases with regulated morphology and distribution and their role on dynamic recrystallization in hot-rolled Mg–Gd–Y–Zn–Zr alloy. Journal of Materials Research and Technology, 2023, 26: 6121-6134 J]

[23] Yang Z-q, Ma A-b, Xu B-q, et al.. Development of a high-strength Mg–11Gd–2Ag (wt%) alloy sheet with extra-low anisotropy. Materials Science and Engineering: A, 2021, 811: 141084 J]

[24] Xu W-l, Chen X-h, Pan F-s. Effect of Y content on the microstructure and mechanical anisotropy of Mg–6Zn-xY-0.5Ce-0.4Zr alloy subjected to asymmetric rolling. Materials Science and Engineering: A, 2023, 882: 145465 J]

[25] Nie H-h, Xu X, Liu Q-f, et al.. Elimination of in-plane mechanical anisotropy and enhancement of strength-ductility of rolled Mg sheets via electric-associated twinning and recrystallization. Materials Science and Engineering: A, 2023, 871: 144873 J]

[26] Fatemi S M, Moradipour Y, Hajian M. Deformation mechanisms and evolution of second phase particles of Mg–Y–Nd–Gd–Zr alloy during plane strain compression. Metals and Materials International, 2021, 27(11): 4717-4729 J]

[27] Chun Y B, Davies C H J. Investigation of prism <a> slip in warm-rolled AZ31 alloy. Metallurgical and Materials Transactions A, 2011, 42(13): 4113-4125 J]

[28] Agnew S R, Yoo M H, Tomé C N. Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y. Acta Materialia, 2001, 49(20): 4277-4289 J]

[29] Chen J-h, Huang W-y, Liu B, et al.. Study on the microstructures and tensile creep behaviors of extruded dilute Mg–Mn–Zn alloys. Journal of Materials Research and Technology, 2023, 25: 5443-5456 J]

[30] Yin D D, Boehlert C J, Long L J, et al.. Tensioncompression asymmetry and the underlying slip/twinning activity in extruded Mg–Y sheets. International Journal of Plasticity, 2021, 136: 102878 J]

[31] Kwak T Y, Kim W J. Mechanical properties and Hall-Petch relationship of the extruded Mg-Zn-Y alloys with different volume fractions of icosahedral phase. Journal of Alloys and Compounds, 2019, 770: 589-599 J]

[32] Chen W-h, He W-j, Jiang B, et al.. Simultaneous enhancement of strength and ductility for AZ31 magnesium alloy by pre-twinning induced heterostructure. International Journal of Plasticity, 2022, 159: 103483 J]

[33] Liu S-s, Liu H, Chen X, et al.. Effect of texture on deformation behavior of heterogeneous Mg-13Gd alloy with strength – ductility synergy. Journal of Materials Science & Technology, 2022, 113: 271-286 J]

[34] Li M-y, Guan Z-p, Liu L-p, et al.. Investigation of enhanced strength anisotropy in an extruded Mg–Al–Ca–Mn alloy at cryogenic temperature. Materials Science and Engineering: A, 2024, 890: 145940 J]

[35] Shao X H, Peng Z Z, Jin Q Q, et al.. Atomic-scale segregations at the deformation-induced symmetrical boundary in an Mg-Zn-Y alloy. Acta Materialia, 2016, 118: 177-186 J]

[36] Wang W Y, Tang B, Shang S-l, et al.. Local lattice distortion mediated formation of stacking faults in Mg alloys. Acta Materialia, 2019, 170: 231-239 J]

[37] Jia W-t, Ma L-f, Jiao M-y, et al.. Fracture criterion for predicting edge-cracking in Hot rolling of twin-roll casted AZ31 Mg alloy. Journal of Materials Research and Technology, 2020, 9(3): 4773-4787 J]

[38] Jia W-t, Ma L-f, Le Q-c, et al.. Deformation and fracture behaviors of AZ31B Mg alloy at elevated temperature under uniaxial compression. Journal of Alloys and Compounds, 2019, 783: 863-876 J]

[39] Hagihara K, Kinoshita A, Sugino Y, et al.. Effect of long-period stacking ordered phase on mechanical properties of Mg₉₇Zn₁Y₂ extruded alloy. Acta Materialia, 2010, 58(19): 6282-6293 J]

[40] Ding C, Hu X-s, Shi H-l, et al.. Development and strengthening mechanisms of a hybrid CNTs@SiCp/Mg-6Zn composite fabricated by a novel method. Journal of Magnesium and Alloys, 2021, 9(4): 1363-1372 J]

[41] Zhou X-j, Liu C-m, Gao Y-h, et al.. Mechanical properties of the Mg-Gd-Y-Zn-Zr alloys with different morphologies of long-period stacking ordered phases. Journal of Materials Engineering and Performance, 2018, 27(11): 6237-6245 J]

Rights & permissions

Central South University