Intensive processing optimization of Zn-Cu fabricated by laser powder-bed fusion

Abstract

Laser powder-bed fusion (LPBF) of Zn-0.8Cu (wt.%) alloys exhibits significant advantages in the customization of biodegradable bone implants. However, the formability of LPBFed Zn alloy is not sufficient due to the spheroidization during the interaction of powder and laser beam, of which the mechanism is still not well understood. In this study, the evolution of morphology and grain structure of the LPBFed Zn-Cu alloy was investigated based on singletrack deposition experiments. As the scanning speed increases, the grain structure of a single track of Zn-Cu alloy gradually refines, but the formability deteriorates, leading to the defect’s formation in the subsequent fabrication. The Zn-Cu alloys fabricated by optimum processing parameters exhibit a tensile strength of 157 MPa, yield strength of 106 MPa and elongation of 14.7%. This work provides a comprehensive understanding of the processing optimization of Zn-Cu alloy, achieving LPBFed Zn-Cu alloy with high density and excellent mechanical properties.

References

[1] ChenC, YueR, ZhangJ, et al.. Biodegradable Zn-1.5Cu-1.5Ag alloy with anti-aging ability and strain hardening behavior for cardiovascular stents [J]. Materials Science & Engineering C, Materials for Biological Applications, 2020, 116: 111172

[2] CordovaA, Alvarez-MonM. Behaviour of zinc in physical exercise: A special reference to immunity and fatigue [J]. Neuroscience & Biobehavioral Reviews, 1995, 19(3): 439-445

[3] GongH-B, WangK, StrichR, et al.. In vitro biodegradation behavior, mechanical properties, and cytotoxicity of biodegradable Zn-Mg alloy [J]. Journal of Biomedical Materials Research Part B, Applied Biomaterials, 2015, 103(8): 1632-1640

[4] LiG-N, YangH-T, ZhengY-F, et al.. Challenges in the use of zinc and its alloys as biodegradable metals: Perspective from biomechanical compatibility [J]. Acta Biomaterialia, 2019, 97: 23-45

[5] YangN, BalasubramaniN, VenezuelaJ, et al.. Microstructure refinement in biodegradable Zn-Cu-Ca alloy for enhanced mechanical properties, degradation homogeneity, and strength retention in simulated physiological condition [J]. Journal of Materials Science & Technology, 2022, 125: 1-14

[6] JaouenK, HerrscherE, BalterV. Copper and zinc isotope ratios in human bone and enamel [J]. American Journal of Physical Anthropology, 2017, 162(3): 491-500

[7] TongX, ShenT-X, ZhouX, et al.. Biodegradable Zn - Cu - Li alloys with ultrahigh strength, ductility, antibacterial ability, cytocompatibility, and suitable degradation rate for potential bone-implant applications [J]. Smart Materials in Manufacturing, 2023, 1: 100012

[8] BowenP K, DrelichJ, GoldmanJ. Zinc exhibits ideal physiological corrosion behavior for bioabsorbable stents [J]. Advanced Materials, 2013, 25(18): 2577-2582

[9] DrelichA J, ZhaoS, GuilloryR J, et al.. Long-term surveillance of zinc implant in murine artery: Surprisingly steady biocorrosion rate [J]. Acta Biomaterialia, 2017, 58: 539-549

[10] LiK-Y, ZhaiY-L, ZhuJ-Q, et al.. Effect of building orientation on the in vitro corrosion of biomedical Zn-Cu alloys prepared by selective laser melting [J]. Corrosion Science, 2024, 231: 111957

[11] GuoS-Q, LiuW, HuangS, et al.. Development of laser additive manufacturing technology for metals [J]. Chinese Journal of Engineering Science, 2020, 22(3): 56

[12] DengC-Y, GuoY-F, ChuQ-K, et al.. Study on selective laser melting process of AlMgScZr based on response surface optimization methodology [J]. Materials Research and Application, 2021, 15(3): 210-219

[13] ChuQ-K, YanX-C, YueS-J, et al.. Microstructure and mechanical properties of Ti-12Mo-6Zr-2Fe(TMZF) alloy formed by laser selective melting [J]. Materials Research and Application, 2021, 15(4): 350-357

[14] CunninghamR, ZhaoC, ParabN, et al.. Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed X-ray imaging [J]. Science, 2019, 363(6429): 849-852

[15] KhairallahS A, MartinA A, LeeJ R I, et al.. Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing [J]. Science, 2020, 368(6491): 660-665

[16] KhairallahS A, AndersonA T, RubenchikA, et al.. Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones [J]. Acta Materialia, 2016, 108: 36-45

[17] MontaniM, DemirA G, MostaedE, et al.. Processability of pure Zn and pure Fe by SLM for biodegradable metallic implant manufacturing [J]. Rapid Prototyping Journal, 2017, 23(3): 514-523

[18] WangC-Z, HuY-L, ZhongC, et al.. Microstructural evolution and mechanical properties of pure Zn fabricated by selective laser melting [J]. Materials Science and Engineering: A, 2022, 846: 143276

[19] WenP, JauerL, VoshageM, et al.. Densification behavior of pure Zn metal parts produced by selective laser melting for manufacturing biodegradable implants [J]. Journal of Materials Processing Technology, 2018, 258: 128-137

[20] ShuaiC-J, DongZ, HeC-X, et al.. A peritectic phase refines the microstructure and enhances Zn implants [J]. Journal of Materials Research and Technology, 2020, 9(3): 2623-2634

[21] NiuJ-L, TangZ-B, HuangH, et al.. Research on a Zn-Cu alloy as a biodegradable material for potential vascular stents application [J]. Materials Science and Engineering: C, 2016, 69: 407-413

[22] SuY-P, WangM, LinX, et al.. Researches on lamellar structures in the unidirectional solidified Zn–2 wt.% Cu peritectic alloy [J]. Materials Letters, 2004, 58(21): 2670-2674

[23] LanC-X, HuY-L, WangC-Z, et al.. Phase formation and strengthening mechanism of Zn–2 wt% Cu alloy fabricated by laser powder bed fusion [J]. Additive Manufacturing, 2024, 85: 104153

[24] WangY-F, YuC-F, XingL-L, et al.. Grain structure and texture of the SLM single track [J]. Journal of Materials Processing Technology, 2020, 281: 116591

[25] YadroitsevI, KrakhmalevP, YadroitsavaI, et al.. Energy input effect on morphology and microstructure of selective laser melting single track from metallic powder [J]. Journal of Materials Processing Technology, 2013, 213(4): 606-613

[26] YadroitsevI, GusarovA, YadroitsavaI, et al.. Single track formation in selective laser melting of metal powders [J]. Journal of Materials Processing Technology, 2010, 210(12): 1624-1631

[27] LiuJ H, HuangC X, WuS D, et al.. Tensile deformation and fracture behaviors of high purity polycrystalline zinc [J]. Materials Science and Engineering: A, 2008, 490(1–2): 117-125

[28] WenP, VoshageM, JauerL, et al.. Laser additive manufacturing of Zn metal parts for biodegradable applications: Processing, formation quality and mechanical properties [J]. Materials & Design, 2018, 155: 36-45

[29] YangM-L, YangL, PengS-P, et al.. Laser additive manufacturing of zinc: Formation quality, texture, and cell behavior [J]. Bio-Design and Manufacturing, 2023, 6(2): 103-120

[30] ChenW-L, YangQ, HuangS-K, et al.. Laser power modulated microstructure evolution, phase transformation and mechanical properties in NiTi fabricated by laser powder bed fusion [J]. Journal of Alloys and Compounds, 2021, 861: 157959

[31] LaneB, ZhirnovI, MekhontsevS, et al.. Transient laser energy absorption, co-axial melt pool monitoring, and relationship to melt pool morphology [J]. Additive Manufacturing, 2020, 36: 101504

[32] DuY-X, GuD-D, XiL-X, et al.. Laser additive manufacturing of bio-inspired lattice structure: Forming quality, microstructure and energy absorption behavior [J]. Materials Science and Engineering: A, 2020, 773: 138857

[33] QinY, LiuJ-G, ChenY-Z, et al.. Influence of laser energy input and shielding gas flow on evaporation fume during laser powder bed fusion of Zn metal [J]. Materials, 2021, 14(10): 2677

[34] LinJ-X, TongX, WangK, et al.. Biodegradable Zn–3Cu and Zn–3Cu–0.2Ti alloys with ultrahigh ductility and antibacterial ability for orthopedic applications [J]. Journal of Materials Science & Technology, 2021, 68: 76-90

[35] Bakhsheshi-RadH R, HamzahE, LowH T, et al.. Fabrication of biodegradable Zn-Al-Mg alloy: Mechanical properties, corrosion behavior, cytotoxicity and antibacterial activities [J]. Materials Science and Engineering: C, 2017, 73: 215-219

[36] TongX, ZhangD-C, LinJ-X, et al.. Development of biodegradable Zn–1Mg–0.1RE (RE = Er, Dy, and Ho) alloys for biomedical applications [J]. Acta Biomaterialia, 2020, 117: 384-399

[37] ShiZ-Z, YuJ, LiuX-F, et al.. Effects of Ag, Cu or Ca addition on microstructure and comprehensive properties of biodegradable Zn-0.8Mn alloy [J]. Materials Science and Engineering: C, 2019, 99: 969-978

[38] NingJ, MaZ-X, ZhangL-J, et al.. Effects of magnesium on microstructure, properties and degradation behaviors of zinc-based alloys prepared by selective laser melting [J]. Materials Research Express, 2022, 9(8): 086511

[39] VoshageM, MegahedS, SchücklerP G, et al.. Additive manufacturing of biodegradable Zn-xMg alloys: Effect of Mg content on manufacturability, microstructure and mechanical properties [J]. Materials Today Communications, 2022, 32: 103805

[40] YangY-W, YuanF-L, GaoC-D, et al.. A combined strategy to enhance the properties of Zn by laser rapid solidification and laser alloying [J]. Journal of the Mechanical Behavior of Biomedical Materials, 2018, 82: 51-60

[41] ShuaiC-J, XueL-F, GaoC-D, et al.. Selective laser melting of Zn–Ag alloys for bone repair: Microstructure, mechanical properties and degradation behaviour [J]. Virtual and Physical Prototyping, 2018, 13(3): 146-154

[42] ShuaiC-J, ChengY, YangY-W, et al.. Laser additive manufacturing of Zn-2Al part for bone repair: Formability, microstructure and properties [J]. Journal of Alloys and Compounds, 2019, 798: 606-615

[43] ShuaiC-J, YangM-L, DengF, et al.. Forming quality, mechanical properties, and anti-inflammatory activity of additive manufactured Zn-Nd alloy [J]. Journal of Zhejiang University: Science A, 2020, 21(11): 876-891

[44] GaoC-D, LiC-Z, PengS-P, et al.. Spiral-eutectic-reinforced biodegradable Zn–Mg–Ag alloy prepared via selective laser melting [J]. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 2022, 1(2): 100022

[45] ShuaiC-J, ZhaoY, LiC-Z, et al.. Supersaturated solid solution enhanced biodegradable Zn-Mn alloys prepared by mechanical alloying and selective laser melting [J]. Journal of Alloys and Compounds, 2023, 943: 169145

[46] GaoC-D, TangS, ZhaoS, et al.. Amorphous/crystalline Zn₆₀Zr₄₀alloys lattice structures with improved mechanical properties fabricated by mechanical alloying and selective laser melting [J]. Virtual and Physical Prototyping, 2023, 18(1): e2220549

[47] WaqasM, HeD-Y, TanZ, et al.. A study of selective laser melting process for pure zinc and Zn10mg alloy on process parameters and mechanical properties [J]. Rapid Prototyping Journal, 2023, 29(9): 1923-1939

[48] QinY, YangH-T, LiuA-B, et al.. Processing optimization, mechanical properties, corrosion behavior and cytocompatibility of additively manufactured Zn-0.7Li biodegradable metals [J]. Acta Biomaterialia, 2022, 142: 388-401

[49] Sanaty-ZadehA. Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall–Petch effect [J]. Materials Science and Engineering: A, 2012, 531: 112-118

[50] ChenC, FanS-H, NiuJ-L, et al.. Alloying design strategy for biodegradable zinc alloys based on first-principles study of solid solution strengthening [J]. Materials & Design, 2021, 204: 109676

[51] HadadzadehA, BaxterC, AmirkhizB S, et al.. Strengthening mechanisms in direct metal laser sintered AlSi₁₀Mg: Comparison between virgin and recycled powders [J]. Additive Manufacturing, 2018, 23: 108-120

[52] RahmatiS, VeigaR G A, JodoinB, et al.. Crystal orientation and grain boundary effects on plastic deformation of FCC particles under high velocity impacts [J]. Materialia, 2021, 15: 101004

[53] DongZ, HanC-J, LiuG-Q, et al.. Revealing anisotropic mechanisms in mechanical and degradation properties of zinc fabricated by laser powder bed fusion additive manufacturing [J]. Journal of Materials Science & Technology, 2025, 214: 87-104

[54] DongZ, HanC-J, ZhaoY-Z, et al.. Role of heterogenous microstructure and deformation behavior in achieving superior strength-ductility synergy in zinc fabricated via laser powder bed fusion [J]. International Journal of Extreme Manufacturing, 2024, 6(4): 045003

[55] BednarczykW, KawałkoJ, RutkowskiB, et al.. Abnormal grain growth in a Zn-0.8Ag alloy after processing by high-pressure torsion [J]. Acta Materialia, 2021, 207: 116667

[56] ZhengD, LiR-D, YuanT-C, et al.. Microstructure and mechanical property of additively manufactured NiTi alloys: A comparison between selective laser melting and directed energy deposition [J]. Journal of Central South University, 2021, 28(4): 1028-1042

[57] MaK-K, WenH-M, HuT, et al.. Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy [J]. Acta Materialia, 2014, 62: 141-155

[58] TahreenN, ZhangD F, PanF S, et al.. Strengthening mechanisms in magnesium alloys containing ternary I, W and LPSO phases [J]. Journal of Materials Science & Technology, 2018, 34(7): 1110-1118

[59] NaghdiF, MahmudiR, KangJ Y, et al.. Contributions of different strengthening mechanisms to the shear strength of an extruded Mg–4Zn–0.5Ca alloy [J]. Philosophical Magazine, 2015, 95(31): 3452-3466

[60] LiuZ-L, QiuD, WangF, et al.. Effect of grain refinement on tensile properties of cast zinc alloys [J]. Metallurgical and Materials Transactions A, 2016, 47(2): 830-841

[61] MaZ-C, ZhaoH-W, LuS, et al.. Effects of zinc on static and dynamic mechanical properties of copper-zinc alloy [J]. Journal of Central South University, 2015, 22(7): 2440-2445

RIGHTS & PERMISSIONS

Central South University