Time-dependent effects in transient liquid phase bonding of 304L and Cp-Ti using an Ag-Cu interlayer

Abstract

One of the challenges for bimetal manufacturing is the joining process. Hence, transient liquid phase (TLP) bonding was performed between 304L stainless steel and Cp-Ti using an Ag-Cu interlayer with a thickness of 75 µm for bonding time of 20, 40, 60, and 90 min. The bonding temperature of 860 °C was considered, which is under the β transus temperature of Cp-Ti. During TLP bonding, various intermetallic compounds (IMCs), including Ti₅Cr₇Fe₁₇, (Cr, Fe)₂Ti, Ti(Cu, Fe), Ti₂(Cu, Ag), and Ti₂Cu from 304L toward Cp-Ti formed in the joint. Also, on the one side, with the increase in time, further diffusion of elements decreases the blocky IMCs such as Ti₅Cr₇Fe₁₇, (Cr, Fe)₂Ti, Ti(Cu, Fe) in the 304L diffusion-affected zone (DAZ) and reaction zone, and on the other side, Ti₂(Cu, Ag) IMC transformed into fine morphology toward Cp-Ti DAZ. The microhardness test also demonstrated that the (Cr, Fe)₂Ti + Ti₅Cr₇Fe₁₇ IMCs in the DAZ on the side of 304L have a hardness value of HV 564, making it the hardest phase. The maximum and minimum shear strength values are equal to 78.84 and 29.0 MPa, respectively. The cleavage pattern dominated fracture surfaces due to the formation of brittle phases in dissimilar joints.

Keywords

diffusion brazing / transient liquid phase bonding / dissimilar material joints / microstructural evolution / mechanical properties / grade 2 titanium

References

[1] ShahF A, TrobosM, ThomsenP, et al. . Commercially pure titanium (cp-Ti) versus titanium alloy (Ti₆Al₄V) materials as bone anchored implants—Is one truly better than the other?. Materials Science and Engineering C, 2016, 62: 960-966 J]

[2] YangJ-y, SongY-w, DongK-h, et al. . Research progress on the corrosion behavior of titanium alloys. Corrosion Reviews, 2023, 41(1): 5-20 J]

[3] TshepheT S, AkinwamideS O, OlevskyE, et al. . Additive manufacturing of titanium-based alloys—A review of methods, properties, challenges, and prospects. Heliyon, 2022, 8(3): e09041 J]

[4] ShahmirH, LangdonT G. Characteristics of the allotropic phase transformation in titanium processed by high-pressure torsion using different rotation speeds. Materials Science and Engineering A, 2016, 667: 293-299 J]

[5] MazumderS, PantawaneM V, JoshiS S, et al. . Electrochemical and thermal-induced degradation of additively manufactured titanium alloys: A review. Critical Reviews in Solid State and Materials Sciences, 2022, 47(6): 915-954 J]

[6] LuoH-w, WuY-l, DiaoX-o, et al. . Mechanical properties and biocompatibility of titanium with a high oxygen concentration for dental implants. Materials Science & Engineering C, 2020, 117111306 J]

[7] Jessy MichlaJ R, NagarajanR, KrishnasamyS, et al. . Conventional and additively manufactured stainless steels: A review. Transactions of the Indian Institute of Metals, 2021, 74(6): 1261-1278 J]

[8] NorouziE, AtapourM, ShamanianM. Effect of bonding time on the joint properties of transient liquid phase bonding between Ti-6Al-4V and AISI 304. Journal of Alloys and Compounds, 2017, 701335-341 J]

[9] NorouziE, AtapourM, ShamanianM, et al. . Effect of bonding temperature on the microstructure and mechanical properties of Ti-6Al-4V to AISI 304 transient liquid phase bonded joint. Materials & Design, 2016, 99: 543-551 J]

[10] MishraN K, ChurasiyaY K, ShrivastavaA. Dissimilar interface and joint strength of SS 304 and titanium friction stir spot welds: A numerical and experimental analysis. The International Journal of Advanced Manufacturing Technology, 2023, 129(7): 3485-3496 J]

[11] MansorM S M, YusofF, ArigaT, et al. . Microstructure and mechanical properties of micro-resistance spot welding between stainless steel 316L and Ti-6Al-4V. The International Journal of Advanced Manufacturing Technology, 2018, 96(5): 2567-2581 J]

[12] VigramanT, BabuR V, KumarR N. Interfacial reaction products formation in the diffusion bonded joints made between Ti-6Al-4V and AISI 304L with brass interlayer. Materials Today: Proceedings, 2021, 43: 1071-1080[J]

[13] BalasubramanianM. Application of Box – Behnken design for fabrication of titanium alloy and 304 stainless steel joints with silver interlayer by diffusion bonding. Materials & Design, 2015, 77: 161-169 J]

[14] GietzeltT, TothV, HuellA. Diffusion bonding: Influence of process parameters and material microstructure. Joining Technologies, 2016[M]

[15] VazirianS, FarzadiA. Dissimilar transient liquid phase bonding of Ti-6Al-4V and Co-Cr-Mo biomaterials using a Cu interlayer: Microstructure and mechanical properties. Journal of Alloys and Compounds, 2020, 829: 154510 J]

[16] VazirianS, FarzadiA. Effect of bonding temperature on microstructure and mechanical properties of dissimilar joint between Ti-6Al-4V and Co-Cr-Mo biomaterials. Materials Science and Engineering A, 2020, 792139825 J]

[17] DengY-q, ShengG-m, WangF-l, et al. . Microstructure evolution and mechanical properties of transient liquid phase bonded Ti-6Al-4V joint with copper interlayer. Materials & Design, 2016, 921-7 J]

[18] Moshkbar BakhshayeshM, FarzadiA, DoustahadiA, et al. . Measurement of degree of sensitization in post-weld heat treated 13Cr-4Ni martensitic stainless steel clad using double loop electrochemical potentiokinetic technique. Engineering Failure Analysis, 2022, 134: 106046 J]

[19] Moshkbar BakhshayeshM, FarzadiA, KalantarianR, et al. . Evaluation of crane wheels restored by hardfacing two distinct 13Cr-4Ni martensitic stainless steels. Journal of Materials Research and Technology, 2023, 266067-6083 J]

[20] Aghaei GhahderijaniI, BahramiA, ShamanianM, et al. . Transient liquid phase (TLP) bonding of Ti-6Al-4V/AISI 304 stainless steel using Cu/CNT composite interlayer[J]. Journal of Materials Research and Technology, 2022, 20: 4052-4065

[21] JiangQ-y, WangY-j, XuH-m, et al. . Transient liquid phase bonding of graphite to Ti6Al4V alloy. Science and Technology of Welding and Joining, 2022, 27(8): 615-620 J]

[22] JianS-j, LiuK, LiJ, et al. . Effect of interlayer on interfacial microstructure and properties of Ni80Cr20/TC4 vacuum diffusion bonded joint. Vacuum, 2023, 208: 111738 J]

[23] NorouziE, ShamanianM, AtapourM, et al. . Diffusion brazing of Ti-6Al-4V and AISI 304: An EBSD study and mechanical properties. Journal of Materials Science, 2017, 52(20): 12467-12475 J]

[24] Vakili-AzghandiM, RoknianM, SzpunarJ A, et al. . Surface modification of pure titanium via friction stir processing: Microstructure evolution and dry sliding wear performance. Journal of Alloys and Compounds, 2020, 816152557 J]

[25] MuhratA, PugaH, BarbosaJ. Low-temperature brazing of titanium using Al-based filler alloys. Advances in Materials Science and Engineering, 2018, 20184570120 J]

[26] ShakerinS, MalekiV, AlirezaZ S, et al. . Microstructural and mechanical assessment of transient liquid phase bonded commercially pure titanium. Canadian Metallurgical Quarterly, 2017, 56(3): 360-367 J]

[27] OkamotoH, OkamotoHPhase diagrams for binary alloys, 2000, OH, ASM International Materials Park[M]. vol. 44

[28] ZhuZ-g, LiW-l, NguyenQ B, et al. . Enhanced strength-ductility synergy and transformation-induced plasticity of the selective laser melting fabricated 304L stainless steel. Additive Manufacturing, 2020, 35101300 J]

[29] KangL-m, YangChao. A review on high-strength titanium alloys: Microstructure, strengthening, and properties. Advanced Engineering Materials, 2019, 21(8): 1801359 J]

[30] ZakipourS, HalvaeeA, Ali AmadehA, et al. . An investigation on microstructure evolution and mechanical properties during transient liquid phase bonding of stainless steel 316L to Ti-6Al-4V. Journal of Alloys and Compounds, 2015, 626269-276 J]

[31] YangS-m, ChenY-c, PanY T, et al. . Effect of silver on microstructure and antibacterial property of 2205 duplex stainless steel. Materials Science and Engineering C, 2016, 63376-383 J]

[32] AsabreA, KostkaA, StryzhyborodaO, et al. . Effect of Al, Ti and C additions on Widmanstätten microstructures and mechanical properties of cast Al_0.6CoCrFeNi compositionally complex alloys. Materials & Design, 2019, 184: 108201 J]

[33] CascadanD, GrandiniC R. Effect of oxygen in the structure, microstructure and mechanical properties of Ti-xNi (x=5, 10, 15 and 20 wt%) alloys. Metals, 2020, 10(11): 1424 J]

[34] VazirianS, FarzadiA, SoloukA. Joining dental biomaterials of Ti-6Al-4V alloy and Cp-Ti using transient liquid phase bonding: Metallurgical and mechanical assessment. Materials Today Communications, 2022, 32103981 J]

[35] ShiX H, ZhaoC, CaoZ H, et al. . The yielding, deformation and fracture behavior for the Widmanstätten structure of Ti-8Al-1Mo-1V alloy upon high speed impact. Journal of Alloys and Compounds, 2019, 810151952 J]

[36] XiangG-j, LuoX, CaoT-x, et al. . Atomic diffusion and crystal structure evolution at the Fe-Ti interface: Molecular dynamics simulations. Materials, 2022, 15186302 J]

[37] WangS-s, WangK, ChenG-y, et al. . Thermodynamic modeling of Ti-Fe-Cr ternary system. Calphad, 2017, 56160-168 J]

[38] ZengL-j, LiuL-b, HuangS-x, et al. . Experimental investigation of phase equilibria in the Ti-Fe-Cr ternary system. Calphad, 2017, 5858-69 J]

[39] ChuQ-l, BaiR-x, ZhangM, et al. . Microstructure and mechanical properties of titanium/steel bimetallic joints. Materials Characterization, 2017, 132: 330-337 J]

[40] RahmM, HoffmannR, AshcroftN W. Atomic and ionic radii of elements 1–96. Chemistry—A European Journal, 2016, 22(41): 14625-14632 J]

[41] TaguchiO, IijimaY. Diffusion of copper, silver and gold in a-titanium. Philosophical Magazine A, 1995, 72(6): 1649-1655 J]

[42] LeeS Y, IijimaY, TaguchiO, et al. . Diffusion of copper and silver in β-titanium. Journal of the Japan Institute of Metals and Materials, 1990, 54(5): 502-508 J]

[43] DezellusO, ArroyaveR, FriesS G. Thermodynamic modelling of the Ag-Cu-Ti ternary system. International Journal of Materials Research, 2011, 102(3): 286-297 J]

[44] YuD-s, ZhangY, HosseiniS R E, et al. . Element diffusion and microstructure evolution at interface of stainless steel/Ti alloy joint by laser welding with AgCuTi filler metal. Journal of Materials Research and Technology, 2023, 24: 6463-6472 J]

[45] Davoodi JamaloeiA, SalimijaziH R, EdrisH, et al. . Study of TLP bonding of Ti-6Al-4V alloy produced by vacuum plasma spray forming and forging. Materials & Design, 2017, 121: 355-366 J]

[46] JalaliA, AtapourM, ShamanianM, et al. . Transient liquid phase (TLP) bonding of Ti-6Al-4V/UNS 32750 super duplex stainless steel. Journal of Manufacturing Processes, 2018, 33: 194-202 J]

[47] WangQ, DongC, LiawP K. Structural stabilities of β-Ti alloys studied using a new Mo equivalent derived from [β/(α+β)] phase-boundary slopes. Metallurgical and Materials Transactions A, 2015, 46(8): 3440-3447 J]

[48] PaulastoM, Van LooF J J, KivilahtiJ K. Thermodynamic and experimental study of Ti-Ag-Cu alloys. Journal of Alloys and Compounds, 1995, 220(1–2): 136-141 J]

[49] LiangY H, WangH Y, YangY F, et al. . Evolution process of the synthesis of TiC in the Cu-Ti-C system[J]. J Alloys Compd, 2008, 452(2): 298-303

[50] Van BeekJ A, KodentsovA A, van LooF J J. Phase relations in the Ag-Fe-Ti system at 1123 K. Journal of Alloys and Compounds, 1995, 221(1–2): 108-113 J]

[51] BoH, DuarteL I, ZhuW J, et al. . Experimental study and thermodynamic assessment of the Cu-Fe-Ti system. Calphad, 2013, 40: 24-33 J]

[52] CallisterW D, CallisterW DFundamentals of materials science and engineering: An interactive etext, 2001, New York, Wiley[M]

[53] NasajpourA, FarzadiA, MirsalehiS E. Effect of diffusion brazing time on microstructure, isothermal solidification completion and microhardness distribution during joining of Nicrofer 5520 superalloy using a liquated Ni-Cr-B interlayer. Journal of Materials Research and Technology, 2022, 21: 1212-1222 J]

[54] FarzadiA, EsmaeiliH, MirsalehiS E. Transient liquid phase bonding of Inconel 617 superalloy: Effect of filler metal type and bonding time. Welding in the World, 2019, 63(1): 191-200 J]

[55] AlinaghianH, FarzadiA, MarashiP, et al. . Wide gap brazing using Ni-B-Si and Ni-B-Si-Cr-Fe filler metals: Microstructure and high-temperature mechanical properties. Journal of Materials Research and Technology, 2023, 23: 2329-2342 J]

[56] ZakipourS, SamavatianM, HalvaeeA, et al. . The effect of interlayer thickness on liquid state diffusion bonding behavior of dissimilar stainless steel 316/Ti-6Al-4V system. Materials Letters, 2015, 142: 168-171 J]

[57] NasajpourA, FarzadiA, MirsalehiS E. Impacts of diffusion brazing time on mechanical properties of Nicrofer 5520 superalloy joint by Ni-15Cr-3.7B filler metal. Welding in the World, 2024, 68(1): 9-21 J]