High-speed doctor-blading PM6:L8-BO organic solar cells from non-halogenated green solvent with a module efficiency of 16.07%

Abstract

Highly efficient organic solar cells (OSCs) are normally produced using the halogenated solvents chloroform or chlorobenzene, which present challenges for scalable manufacturing due to their toxicity, narrow processing window and low boiling point. Herein, we develop a novel high-speed doctor-blading technique that significantly reduces the required concentration, facilitating the use of eco-friendly, non-halogenated solvents as alternatives to chloroform or chlorobenzene. By utilizing two widely used high-boiling, non-halogenated green solvents—o-xylene (o-XY) and toluene (Tol) —in the fabrication of PM6: L8-BO, we achieve power conversion efficiencies (PCEs) of 18.20% and 17.36%, respectively. Additionally, a module fabricated with o-XY demonstrates a notable PCE of 16.07%. In-situ testing and morphological analysis reveal that the o-XY coating process extends the liquid-to-solid transition stage to 6 s, significantly longer than the 1.7 s observed with Tol processing. This prolonged transition phase is crucial for improving the crystallinity of the thin film, reducing defect-mediated recombination, and enhancing carrier mobility, which collectively contribute to superior PCEs.

References

[1] Cheng P, Li G, Zhan X-w, et al.. Next-generation organic photovoltaics based on non-fullerene acceptors [J]. Nature Photonics, 2018, 12(3): 131-142.

[2] Sha M-z, Pu Y-j, Yin H, et al.. Recent progress of indoor organic photovoltaics—From device performance to multifunctional applications [J]. Organic Electronics, 2023, 114: 106736.

[3] Feng E-m, Zhang C-j, Chang J-h, et al.. A 16.10% efficiency organic solar module with ultra-narrow interconnections fabricated via nanosecond ultraviolet laser processing [J]. Cell Reports Physical Science, 2024, 5(3): 101883.

[4] Yang Y, Feng E-m, Li H-y, et al.. Layer-by-layer slot-die coated high-efficiency organic solar cells processed using twin boiling point solvents under ambient condition [J]. Nano Research, 2021, 14(11): 4236-4242.

[5] Bai X, Feng E-m, Li H-y, et al.. Boosting the photovoltaic performance of doctor-bladed organic solar cells using a low-boiling solvent additive [J]. Organic Electronics, 2023, 118: 106794.

[6] Li H-y, Huang K-q, Dong Y-n, et al.. Efficient organic solar cells with the active layer fabricated from glovebox to ambient condition [J]. Applied Physics Letters, 2020, 117(13): 133301.

[7] Li H-y, Zhang C-j, Wei J-f, et al.. Roll-to-roll micro-gravure printed P3HT: PCBM organic solar cells [J]. Flexible and Printed Electronics, 2019, 4(4): 044007.

[8] Guo X-t, Li H-y, Han Y-f, et al.. Fully doctor-bladed efficient organic solar cells processed under ambient condition [J]. Organic Electronics, 2020, 82: 105725.

[9] Guan S-t, Li Y-k, Xu C, et al.. Self-assembled interlayer enables high-performance organic photovoltaics with power conversion efficiency exceeding 20% [J]. Advanced Materials, 2024, 36(25): 2400342.

[10] Zheng Z, Wang J-q, Bi P-q, et al.. Tandem organic solar cell with 20.2% efficiency [J]. Joule, 2022, 6(1): 171-184.

[11] Liu Q-s, Jiang Y-f, Jin K, et al.. 18% efficiency organic solar cells [J]. Science Bulletin, 2020, 65(4): 272-275.

[12] Meng X-y, Jin K, Xiao Z, et al.. Side chain engineering on D18 polymers yields 18.74% power conversion efficiency [J]. Journal of Semiconductors, 2021, 42(10): 100501.

[13] Cao J-m, Nie G-a, Zhang L-x, et al.. Star polymer donors [J]. Journal of Semiconductors, 2022, 43(7): 070201.

[14] Feng E-m, Zhang C-j, Chang J-h, et al.. Organic solar cells with D18 or derivatives offer efficiency over 19% [J]. Journal of Semiconductors, 2024, 45(5): 050201.

[15] Yuan J, Zhang Y-q, Zhou L-y, et al.. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core [J]. Joule, 2019, 3(4): 1140-1151.

[16] Li C, Zhou J-d, Song J-l, et al.. Non-fullerene acceptors with branched side chains and improved molecular packing to exceed 18% efficiency in organic solar cells [J]. Nature Energy, 2021, 6(6): 605-613.

[17] Cao J-m, Yi L-f, Ding L-ming. The origin and evolution of Y6 structure [J]. Journal of Semiconductors, 2022, 43(3): 030202.

[18] Zhou C-x, Cheng Y-j, Xie J-p, et al.. Acceptor-only oligomers with high coplanarity enable efficient and stable organic solar cells [J]. Chemical Communications, 2024, 60(17): 2361-2364.

[19] Xue L-w, Yan C-y, Yao J, et al.. Heteroatom conjugated-shoulder side-chains-based non-fullerene acceptors for organic solar cells [J]. Cell Reports Physical Science, 2023, 4(3): 101303.

[20] Xu X, Sun C-y, Jing J-h, et al.. High-performance ternary organic solar cells enabled by introducing a new A-DA’D-A guest acceptor with higher-lying LUMO level [J]. ACS Applied Materials & Interfaces, 2022, 14(32): 36582-36591.

[21] Li Z, Chen H-g, Yuan J, et al.. A new low-bandgap polymer acceptor based on benzotriazole for efficient all-polymer solar cells [J]. Journal of Central South University, 2021, 28(7): 1919-1931.

[22] Cao R, Chen Y, Cai F-f, et al.. A new chlorinated non-fullerene acceptor based organic photovoltaic cells over 12% efficiency [J]. Journal of Central South University, 2020, 27(12): 3581-3593.

[23] Wei W-k, Zhou X, Pang S-t, et al.. A-D-A’-D-A type nonfused ring electron acceptors for efficient organic solar cells via synergistic molecular packing and orientation control [J]. Aggregate, 2024, 5(2): e488.

[24] Fang J, Wang Z, Chen Y-y, et al.. Revealing aggregation of non-fullerene acceptors in intermixed phase by ultraviolet-visible absorption spectroscopy [J]. Cell Reports Physical Science, 2022, 3(7): 100983.

[25] Yan L-p, Wang Y, Zhao W-s, et al.. Simultaneous UV and air stability improvement of organic solar cells enabled by carbon-coated zinc oxide as cathode buffer layer [J]. Cell Reports Physical Science, 2023, 4(11): 101654.

[26] Li S-f, Shi C-z, Luo X-y, et al.. High-efficiency binary organic solar cells enabled by pseudobilayer configuration in dilute solution [J]. Solar RRL, 2023, 7(9): 2201090.

[27] He D, Zhou J-x, Zhu Y-f, et al.. Manipulating vertical phase separation enables pseudoplanar heterojunction organic solar cells over 19% efficiency via ternary polymerization [J]. Advanced Materials, 2024, 36(5): e2308909.

[28] Chen K-f, Cai P, Peng H-l, et al.. Ti₃C₂T_x MXene for organic/perovskite optoelectronic devices [J]. Journal of Central South University, 2021, 28(12): 3935-3958.

[29] Ma R-j, Jiang X-y, Fu J-h, et al.. Revealing the underlying solvent effect on film morphology in high-efficiency organic solar cells through combined ex situ and in situ observations [J]. Energy & Environmental Science, 2023, 16(5): 2316-2326.

[30] Wang L, Zhan J-z, Zhong W-k, et al.. The role of processing solvent on morphology optimization for slot-die printed organic photovoltaics [J]. Chinese Journal of Polymer Science, 2023, 41(6): 842-850.

[31] Tan X-x, Li Y-l, Yuan X-y, et al.. Polythiophene solar cells processed from non-halogenated solvent with 15.68% efficiency [J]. Science China Chemistry, 2023, 66(8): 2347-2353.

[32] Pang S-t, Chen Z-l, Li J-y, et al.. High-efficiency organic solar cells processed from a real green solvent [J]. Materials Horizons, 2023, 10(2): 473-482.

[33] Zhang S-c, Chen H-b, Wang P-r, et al.. A large area organic solar module with non-halogen solvent treatment, high efficiency, and decent stability [J]. Solar RRL, 2023, 7(7): 2300029.

[34] Dong S, Jia T, Zhang K, et al.. Single-component non-halogen solvent-processed high-performance organic solar cell module with efficiency over 14% [J]. Joule, 2020, 4(9): 2004-2016.

[35] Sun W-w, Chen H-y, Zhang B, et al.. Host-guest active layer enabling annealing-free, nonhalogenated green solvent processing for high-performance organic solar cells [J]. Chinese Journal of Chemistry, 2022, 40(24): 2963-2972.

[36] Chen H-y, Zhang R, Chen X-b, et al.. A guest-assisted molecular-organization approach for >17% efficiency organic solar cells using environmentally friendly solvents [J]. Nature Energy, 2021, 6(11): 1045-1053.

[37] Sun R, Wang T, Yang X-r, et al.. High-speed sequential deposition of photoactive layers for organic solar cell manufacturing [J]. Nature Energy, 2022, 7(11): 1087-1099.

[38] Wu J, Li Y-z, Liu H, et al.. Infrared nanosecond laser assisted preparation of large-area organic photovoltaic module [J]. Chemical Journal of Chinese Universities, 2023, 44(7): 20230078 (in Chinese)

[39] Li X-r, Yang H-y, Du X-y, et al.. High-performance layer-by-layer organic solar cells enabled by non-halogenated solvent with 17.89% efficiency [J]. Chemical Engineering Journal, 2023, 452: 139496.

[40] Su W-y, Zhou X-m, Yao Z-f, et al.. Halogenation strategy of thiophene derived solvent additives enables optimized morphology for organic solar cells with 19.17% efficiency [J]. Advanced Functional Materials, 2024, 34(19): 2313744.

[41] Chen T-y, Zheng X-j, Wang D, et al.. Delayed crystallization kinetics allowing high-efficiency allpolymer photovoltaics with superior upscaled manufacturing [J]. Advanced Materials, 2024, 36(3): e2308061.

[42] Wu Y, Wu Q, Wang W, et al.. Highly efficient allpolymer solar cells enabled by random ternary copolymer acceptors with high tolerance on molar ratios [J]. Solar RRL, 2020, 4(11): 2000409.

[43] XU Xiang, WEI Qing-ya, ZHOU Zhi-sheng, et al. Efficient semitransparent organic solar cells with CRI over 90% enabled by an ultralow-bandgap A-DA’D-A small molecule acceptor [J]. Advanced Functional Materials, 2023: 2305017. DOI: https://doi.org/10.1002/adfm.202305017.

[44] Kong X-l, Zhang J-y, Meng L, et al.. 18.55% efficiency polymer solar cells based on a small molecule acceptor with alkylthienyl outer side chains and a low-cost polymer donor PTQ10 [J]. CCS Chemistry, 2023, 5(4): 841-850.

[45] Zhu C, Hu K, Meng L, et al.. High-performance D—A copolymer donor based on difluoroquinoxaline a-unit with alkyl-chlorothiophene substituents for polymer solar cells [J]. CCS Chemistry, 2023, 5(10): 2378-2388.

[46] Feng E-m, Han Y-f, Chang J-h, et al.. 26.75 cm² organic solar modules demonstrate a certified efficiency of 14.34% [J]. Journal of Semiconductors, 2022, 43(10): 100501.

[47] Shen Y-F, Zhang H, Zhang J-q, et al.. In situ absorption characterization guided slot-die-coated high-performance large-area flexible organic solar cells and modules [J]. Advanced Materials, 2023, 35(10): e2209030.

[48] Zhao H, Naveed H B, Lin B-j, et al.. Hot hydrocarbon-solvent slot-die coating enables high-efficiency organic solar cells with temperature-dependent aggregation behavior [J]. Advanced Materials, 2020, 32(39): e2002302.

[49] Peng Z-x, Zhang Y-w, Sun X-k, et al.. Real-time probing and unraveling the morphology formation of blade-coated ternary nonfullerene organic photovoltaics with in situ X-ray scattering [J]. Advanced Functional Materials, 2023, 33(14): 2213248.

RIGHTS & PERMISSIONS

Central South University