Characterization of fluidized reduction roasting of nickel laterite ore under CO/CO₂ atmosphere

Abstract

Fluidized reduction roasting is an efficient metallurgical technique. However, its application to nickel laterite ore has rarely been reported. In this paper, the effects of reduction temperature, reduction time, CO concentration, and material particle size on the roasting characteristics of ferronickel fluidization reduction were investigated. Combined with X-ray diffraction, scanning electron microscopy-energy dispersive spectrometry (SEM-EDS) characterization, the mineral phases and microscopic morphology of nickel laterite ore and its roasted ores were analyzed in depth. The results indicated that under the condition of a CO/CO₂ ratio of 1:1, a reduction temperature of 800 °C, and a reduction roasting time of 60 min, a nickel-iron concentrate with a nickel grade of 2.10% and an iron content of 45.96% was produced from a raw material with a nickel grade of 1.45%, achieving a remarkable nickel recovery rate of 46.26%. XRD and SEM-EDS analysis indicated that nickel in the concentrate mainly exists in the form of [Fe, Ni], while the unrecovered nickel in the tailings is primarily present in the form of [Fe, Ni] and Ni₂SiO₄ in forsterite. This study established a theoretical foundation for further exploration of fluidized reduction roasting technology.

Keywords

nickel laterite ore / fluidized reduction roasting / nickel grade / recovery

References

[1] Mu W-n, Lu X-y, Cui F-h, et al. Transformation and leaching kinetics of silicon from low-grade nickel laterite ore by pre-roasting and alkaline leaching process [J]. Transactions of Nonferrous Metals Society of China, 2018, 28(1): 169-176

[2] Yuan S, Zhou W-t, Li Y-j, et al. Efficient enrichment of nickel and iron in laterite nickel ore by deep reduction and magnetic separation [J]. Transactions of Nonferrous Metals Society of China, 2020, 30(3): 812-822

[3] Li B, Ding Z-g, Wei Y-g, et al. Kinetics of reduction of low-grade nickel laterite ore using carbon monoxide [J]. Metallurgical and Materials Transactions B, 2018, 49(6): 3067-3073

[4] Wang F, Dreisinger D. An integrated process of CO₂ mineralization and selective nickel and cobalt recovery from olivine and laterites [J]. Chemical Engineering Journal, 2023, 451: 139002

[5] Farrokhpay S, Filippov L. Challenges in processing nickel laterite ores by flotation [J]. International Journal of Mineral Processing, 2016, 151: 59-67

[6] Zhu D Q, Cui Y, Vining K, et al. Upgrading low nickel content laterite ores using selective reduction followed by magnetic separation [J]. International Journal of Mineral Processing, 2012, 106–109: 1-7

[7] McDonald R G, Whittington B I. Atmospheric acid leaching of nickel laterites review [J]. Hydrometallurgy, 2008, 91(1–4): 35-55

[8] Forster J, Pickles C A, Elliott R. Microwave carbothermic reduction roasting of a low grade nickeliferous silicate laterite ore [J]. Minerals Engineering, 2016, 88: 18-27

[9] Farrokhpay S, Filippov L, Fornasiero D. Preconcentration of nickel in laterite ores using physical separation methods [J]. Minerals Engineering, 2019, 141: 105892

[10] Pickles C A, Elliott R. Thermodynamic analysis of selective reduction of nickeliferous limonitic laterite ore by carbon monoxide [J]. Mineral Processing and Extractive Metallurgy, 2015, 124(4): 208-216

[11] Asadrokht M, Zakeri A. Chemo-physical concentration of a low-grade nickel laterite ore [J]. Minerals Engineering, 2022, 178: 107398

[12] Chen N, Cao Z-f, Zhong H, et al. A novel approach for recovery of nickel and iron from nickel laterite ore [J]. Metallurgical Research & Technology, 2015, 112(3): 306

[13] Wang S, Jiang Y, Guo Y-f, et al. Behavior of chromium in the reduction and smelting of high alumina nickel laterite in blast furnace [J]. Journal of Materials Research and Technology, 2023, 22: 2275-2283

[14] Takeda O, Lu X, Miki T, et al. Thermodynamic evaluation of elemental distribution in a ferronickel electric furnace for the prospect of recycling pathway of nickel [J]. Resources, Conservation and Recycling, 2018, 133: 362-368

[15] Li G-h, Zhi Q, Rao M-j, et al. Effect of basicity on sintering behavior of saprolitic nickel laterite in air [J]. Powder Technology, 2013, 249: 212-219

[16] Gao L-h, Liu Z-g, Pan Y-z, et al. Separation and recovery of iron and nickel from low-grade laterite nickel ore using reduction roasting at rotary kiln followed by magnetic separation technique [J]. Mining, Metallurgy & Exploration, 2019, 36(2): 375-384

[17] Liu K, Chen Q-y, Hu H-p, et al. Pressure acid leaching of a Chinese laterite ore containing mainly maghemite and magnetite [J]. Hydrometallurgy, 2010, 104(1): 32-38

[18] Thubakgale C K, Mbaya R K K, Kabongo K. A study of atmospheric acid leaching of a South African nickel laterite [J]. Minerals Engineering, 2013, 54: 79-81

[19] Ma B-z, Wang C-y, Yang W-j, et al. Selective pressure leaching of Fe (II)-rich limonitic laterite ores from Indonesia using nitric acid [J]. Minerals Engineering, 2013, 45: 151-158

[20] Ilyas S, Srivastava R R, Kim H, et al. Extraction of nickel and cobalt from a laterite ore using the carbothermic reduction roasting-ammoniacal leaching process [J]. Separation and Purification Technology, 2020, 232: 115971

[21] Tian Q-h, Dong B, Guo X-y, et al. Valuable metals substance flow analysis in high-pressure acid leaching process of laterites [J]. Journal of Central South University, 2023, 30(6): 1776-1786

[22] Chen S-l, Guo X-y, Shi W-t, et al. Extraction of valuable metals from low-grade nickeliferous laterite ore by reduction roasting-ammonia leaching method [J]. Journal of Central South University of Technology, 2010, 17(4): 765-769

[23] Tang Z-d, Gao P, Li Y-j, et al. Recovery of iron from hazardous tailings using fluidized roasting coupling technology [J]. Powder Technology, 2020, 361: 591-599

[24] Zhou Z-y, Zhu Y-m, Jin J-p, et al. Enhanced vanadium extraction from muscovite-type vanadium-bearing shale by suspension oxidation roasting pretreatment-acid leaching [J]. Separation and Purification Technology, 2023, 309: 123066

[25] Wu H, Feng Y-l, Li H-r, et al. Co-recovery of manganese from pyrolusite and gold from carbonaceous gold ore using fluidized roasting coupling technology [J]. Chemical Engineering and Processing: Process Intensification, 2020, 147: 107742

[26] Cai Z-l, Feng Y-l, Li H-r, et al. Co-recovery of manganese from low-grade pyrolusite and vanadium from stone coal using fluidized roasting coupling technology [J]. Hydrometallurgy, 2013, 131–132: 40-45

[27] Liu P-f, Zhu X-r, Han Y-x, et al. Fluidization magnetization roasting of limonite ore using H₂ as a reductant: Phase transformation, structure evolution, and kinetics [J]. Powder Technology, 2023, 414: 118107

[28] Zhou W-t, Sun Y-s, Han Y-x, et al. Recycling iron from oolitic hematite via microwave fluidization roasting and magnetic separation [J]. Minerals Engineering, 2021, 164: 106851

[29] Mishra S, Baliarsingh M, Mahanta J, et al. Batch scale study on magnetizing roasting of low-grade iron ore tailings using fluidized bed roaster [J]. Materials Today: Proceedings, 2022, 62: 5856-5860

[30] Li B, Wang H, Wei Y-gang. The reduction of nickel from low-grade nickel laterite ore using a solid-state deoxidisation method [J]. Minerals Engineering, 2011, 24(14): 1556-1562

[31] Tartaj P, Cerpa A, García-González M T, et al. Surface instability of serpentine in aqueous suspensions [J]. Journal of Colloid and Interface Science, 2000, 231(1): 176-181

[32] Xu P-y, Wang Q, Li C, et al. Relationship between process mineralogical characterization and beneficiability of low-grade laterite nickel ore [J]. Journal of Central South University, 2021, 28(10): 3061-3073

[33] Ma B-z, Li X, Yang W-j, et al. Nonmolten state metalized reduction of saprolitic laterite ores: Effective extraction and process optimization of nickel and iron [J]. Journal of Cleaner Production, 2020, 256: 120415

[34] Li Y-j, Sun Y-s, Han Y-x, et al. Coal-based reduction mechanism of low-grade laterite ore [J]. Transactions of Nonferrous Metals Society of China, 2013, 23(11): 3428-3433