Effect of process parameters on microstructure and mechanical properties of a nickel-aluminum-bronze alloy fabricated by laser powder bed fusion

Abstract

This work investigated the effect of process parameters on densification, microstructure, and mechanical properties of a nickel-aluminum-bronze (NAB) alloy fabricated by laser powder bed fusion (LPBF) additive manufacturing. The LPBF-printed NAB alloy samples with relative densities of over 98.5% were obtained under the volumetric energy density range of 200–250 J/mm³. The microstructure of the NAB alloy printed in both horizontal and vertical planes primarily consisted of β′ martensitic phase and banded α phase. In particular, a coarser-columnar grain structure and stronger crystallographic texture were achieved in the vertical plane, where the maximum texture intensity was 30.56 times greater than that of random textures at the (100) plane. Increasing the volumetric energy density resulted in a decrease in the columnar grain size, while increasing the amount of α phase. Notably, β₁′ martensitic structures with nanotwins and nanoscale κ-phase precipitates were identified in the microstructure of LPBF-printed NAB samples with a volumetric energy density of 250 J/mm³. Furthermore, under optimal process parameters with a laser power of 350 W and scanning speed of 800 mm/s, significant improvements were observed in the microhardness (HV 386) and ultimate tensile strength (671 MPa), which was attributed to an increase in refined acicular martensite.

References

[1] RichardsonI. Guide to nickel aluminium bronze for engineers [M], 2016Mclean, VirginiaCopper Development Association

[2] ZhangQ-K, YangJ, SunW-S, et al. . Evolution in microstructure and mechanical properties of Cu alloy during wire and arc additive manufacture [J]. Journal of Central South University, 2023, 30(2): 400-411

[3] XuC, PengY, ChenL-Y, et al. . Corrosion behavior of wire-arc additive manufactured and as-cast Ni-Al bronze in 3.5wt% NaCl solution [J]. Corrosion Science, 2023, 215: 111048

[4] LotfollahiM, ShamanianM, SaatchiA. Effect of friction stir processing on erosion-corrosion behavior of nickel-aluminum bronze [J]. Materials & Design, 2014, 62: 282-287

[5] YangF-F, KangH-J, GuoE-Y, et al. . The role of nickel in mechanical performance and corrosion behaviour of nickel-aluminium bronze in 3.5 wt.% NaCl solution [J]. Corrosion Science, 2018, 139: 333-345

[6] ZhaiW-Z, LiJ-J, ZhouR-H, et al. . Improved corrosion resistance of nickel-aluminum bronze by electron beam powder bed fusion [J]. Materials Chemistry and Physics, 2023, 296: 127225

[7] BiJ, ChenY-B, ChenX, et al. . Densification, microstructural features and tensile properties of selective laser melted AlMgSiScZr alloy from single track to block specimen [J]. Journal of Central South University, 2021, 28(4): 1129-1143

[8] TAŞDEMIR A, NOHUT S. An overview of wire arc additive manufacturing (WAAM) in shipbuilding industry [J]. Ships and Offshore Structures, 2020: 1–18. DOI: https://doi.org/10.1080/17445302.2020.1786232.

[9] DharmendraC, HadadzadehA, AmirkhizB S, et al. . Microstructural evolution and mechanical behavior of nickel aluminum bronze Cu-9Al-4Fe-4Ni-1Mn fabricated through wire-arc additive manufacturing [J]. Additive Manufacturing, 2019, 30: 100872

[10] BrezinaP. Heat treatment of complex aluminium bronzes [J]. International Metals Reviews, 1982, 27(1): 77-120

[11] LiB-Y, ZhengH, HanC-J, et al. . Nanotwins-containing microstructure and superior mechanical strength of a Cu-9Al-5Fe-5Ni alloy additively manufactured by laser metal deposition [J]. Additive Manufacturing, 2021, 39: 101825

[12] ElambasserilJ, RogersJ, WallbrinkC, et al. . Laser powder bed fusion additive manufacturing (LPBF-AM): The influence of design features and LPBF variables on surface topography and effect on fatigue properties [J]. Critical Reviews in Solid State and Materials Sciences, 2023, 48(1): 132-168

[13] GuD D, MeinersW, WissenbachK, et al. . Laser additive manufacturing of metallic components: Materials, processes and mechanisms [J]. International Materials Reviews, 2012, 57(3): 133-164

[14] MurrayT, ThomasS, WuY-X, et al. . Selective laser melting of nickel aluminium bronze [J]. Additive Manufacturing, 2020, 33: 101122

[15] BarrC, PaterasA, MolotnikovA, et al. . Effect of composition on the tensile and corrosion per Effect of process parameters and heat treatment on the microstructure and properties of CuCrZr alloy by selective laser melting formance of nickel aluminium bronze produced via laser powder bed fusion [J]. Additive Manufacturing, 2022, 54: 102771

[16] SongC-H, ZouZ, YanZ-W, et al. . Process optimization and tailored mechanical properties of a nuclear Zr-4 alloy fabricated via laser powder bed fusion [J]. Micromachines, 2023, 14(3): 556

[17] WangQ-J, ZhangY-F, WangK-S, et al. . Effect of process parameters and heat treatment on the microstructure and properties of CuCrZr alloy by selective laser melting [J]. Materials Science and Engineering A, 2022, 857: 144054

[18] ZhangS-S, ZhuH-H, HuZ-H, et al. . Selective laser melting of Cu₁₀ Zn alloy powder using high laser power [J]. Powder Technology, 2019, 342: 613-620

[19] JahanafroozA, HasanF, LorimerG W, et al. . Microstructural development in complex nickel-aluminum bronzes [J]. Metallurgical Transactions A, 1983, 14(10): 1951-1956

[20] SwannP R, WarlimontH. The electron-metallography and crystallography of copper-aluminum martensites [J]. Acta Metallurgica, 1963, 11(6): 511-527

[21] ZhangY-K, XuL-Y, ZhaoL, et al. . Process-microstructure-properties of CuAlNi shape memory alloys fabricated by laser powder bed fusion [J]. Journal of Materials Science & Technology, 2023, 152: 1-15

[22] SariU, AksoyI. Electron microscopy study of 2H and 18R martensites in Cu-11.92wt% Al-3.78wt% Ni shape memory alloy [J]. Journal of Alloys and Compounds, 2006, 417(1–2): 138-142

[23] AydogduA, AydogduY, AdiguzelO. Long-term ageing behaviour of martensite in shape memory Cu-Al-Ni alloys [J]. Journal of Materials Processing Technology, 2004, 153–154: 164-169

[24] GuerraC, Ramos-GrezJ A, La FéperdomoI, et al. . Microstructure and mechanical properties of Cu-11Al-5Ni-4Fe wt% manufactured by LPBF [J]. Metals, 2023, 13(3): 459

[25] YanY-F, KouS-Q, YangH-Y, et al. . Ceramic particles reinforced copper matrix composites manufactured by advanced powder metallurgy: Preparation, performance, and mechanisms [J]. International Journal of Extreme Manufacturing, 2023, 5(3): 032006

[26] DingD-H, PanZ-X, van DuinS, et al. . Fabricating superior NiAl bronze components through wire arc additive manufacturing [J]. Materials, 2016, 9(8): 652

[27] LuL, SchwaigerR, ShanZ W, et al. . Nano-sized twins induce high rate sensitivity of flow stress in pure copper [J]. Acta Materialia, 2005, 53(7): 2169-2179

[28] HasanF, LorimerG W, RidleyN. Crystallography of martensite in a Cu-10Al-5Ni-5Fe alloy [J]. Le Journal De Physique Colloques, 1982, 43(C4): C4-653-C4-658

[29] HasanF, JahanafroozA, LorimerG W, et al. . The morphology, crystallography, and chemistry of phases in as-cast nickel-aluminum bronze [J]. Metallurgical Transactions A, 1982, 13(8): 1337-1345

[30] ShakilS I, DharmendraC, AmirkhizB S, et al. . Micromechanical characterization of wire-arc additive manufactured and cast nickel aluminum bronze: Ambient and intermediate temperatures [J]. Materials Science and Engineering A, 2020, 792: 139773

[31] DharmendraC, HadadzadehA, AmirkhizB S, et al. . Microstructural evolution and mechanical behavior of nickel aluminum bronze Cu-9Al-4Fe-4Ni-1Mn fabricated through wire-arc additive manufacturing [J]. Additive Manufacturing, 2019, 30: 100872

[32] DwivediA, KhuranaM K, BalaY G. Heat-treated nickel alloys produced using laser powder bed fusion-based additive manufacturing methods: A review [J]. Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 2023, 2(3): 100087

[33] WangL-F, JueJ-B, XiaM-J, et al. . Effect of the thermodynamic behavior of selective laser melting on the formation of in situ oxide dispersion-strengthened aluminum-based composites [J]. Metals, 2016, 6(11): 286

[34] WuX-P, ZhangD-Y, GuoY-W, et al. . Microstructure and mechanical evolution behavior of LPBF (laser powder bed fusion)-fabricated TA15 alloy [J]. Journal of Alloys and Compounds, 2021, 873: 159639

[35] SunQ-S, XueZ-X, ChenY, et al. . Modulation of the thermal transport of micro-structured materials from 3D printing [J]. International Journal of Extreme Manufacturing, 2022, 4(1): 015001

[36] KraussG. Solidification, segregation, and banding in carbon and alloy steels [J]. Metallurgical and Materials Transactions B, 2003, 34(6): 781-792

[37] NiuP-D, LiR-D, FanZ-Q, et al. . Inhibiting cracking and improving strength for additive manufactured Al CoCrFeNi high entropy alloy via changing crystal structure from BCC-to-FCC [J]. Additive Manufacturing, 2023, 71: 103584

[38] LiuL-Q, WangD, DengG-W, et al. . Interfacial characteristics and formation mechanisms of copper-steel multimaterial structures fabricated via laser powder bed fusion using different building strategies [J]. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 2022, 1(3): 100045

[39] YuanT, RenX-L, ChenS-J, et al. . Grain refinement and property improvements of Al-Zn-Mg-Cu alloy by heterogeneous particle addition during wire and arc additive manufacturing [J]. Journal of Materials Research and Technology, 2022, 16: 824-839

[40] CarltonJ S. Propeller materials [M]. Marine Propellers and Propulsion, 2019AmsterdamElsevier425-436

[41] GeraD, SantosJ, KiminamiC S, et al. . Comparison of Cu-Al-Ni-Mn-Zr shape memory alloy prepared by selective laser melting and conventional powder metallurgy [J]. Transactions of Nonferrous Metals Society of China, 2020, 30(12): 3322-3332

[42] ShenC, PanZ-X, DingD-H, et al. . The influence of post-production heat treatment on the multidirectional properties of nickel-aluminum bronze alloy fabricated using wire-arc additive manufacturing process [J]. Additive Manufacturing, 2018, 23: 411-421

[43] TianJ, ZhuW-Z, WeiQ-S, et al. . Process optimization, microstructures and mechanical properties of a Cu-based shape memory alloy fabricated by selective laser melting [J]. Journal of Alloys and Compounds, 2019, 785: 754-764