Formation mechanism of core discing during drilling under deep in-situ stress environment: Numerical simulation and laboratory testing

Abstract

Core discing often occurs during drilling under deep in-situ stress environment. To determine its formation mechanism in sandstone under deep in-situ stress environment, PFC2D was used to study the crack distribution and energy evolution during drilling under different in-situ stress, and specific in-situ stress conditions prone to core discing were obtained. An independently developed testing system was utilized to verify the stress conditions required for core discing in laboratory settings, and to analyze the relationship between the failure and fracture surface morphology characteristics of the core and in-situ stress. The results show that the higher the in-situ stress, the more tensile cracks will be generated in the rock during drilling, especially at the hole wall and the root of the core. The cracks in the core develop from the outside surface inward. Higher in-situ stress levels also result in greater energy transformation, leading to fracture of the rock. The formation of core discing requires specific stress conditions. Core discing occurs at the root of the core when the radial stress (σ_r) is the maximum principal stress at a constant value of 45 MPa and the axial stress (σ_a) is either 25 MPa or 30 MPa. When the difference between σ_r and σ_a increases or the drilling depth increases, the disc thickness decreases, resulting in smoother fracture surfaces and smaller fractal dimensions and thus more pronounced core discing. This study can provide technical and data support for scientifically elucidating the formation mechanism of core discing under deep in-situ stress conditions.

Keywords

deep rock mass / in-situ stress / discing formation mechanism / crack distribution / energy evolution / macroscopic failure characteristics / fracture surface morphology

References

[1] GaoM-z, ZhouX-m, WangX, et al. . Mechanical behavior of coal under true triaxial loading test connecting the effect of excavation- and mining-induced disturbances. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 2023, 9(1): 34 J]

[2] GaoY-n, LanD-h, YangS-q, et al. . The acoustic emission behavior and its fractal characteristics of the sandstone under the disturbance stress paths. Rock Mechanics and Rock Engineering, 2023, 5685487-5511 J]

[3] ZuoJ-p, WangJ-t, JiangY-qian. Macro/meso failure behavior of surrounding rock in deep roadway and its control technology. International Journal of Coal Science & Technology, 2019, 6(3): 301-319 J]

[4] GaoM-z, XieJ, GuoJ, et al. . Fractal evolution and connectivity characteristics of mining-induced crack networks in coal masses at different depths. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 2021, 7(1): 9 J]

[5] GaoM-z, YangB-g, XieJ, et al. . The mechanism of microwave rock breaking and its potential application to rock-breaking technology in drilling. Petroleum Science, 2022, 1931110-1124 J]

[6] GaoM-z, XieJ, GaoY-n, et al. . Mechanical behavior of coal under different mining rates: A case study from laboratory experiments to field testing. International Journal of Mining Science and Technology, 2021, 31(5): 825-841 J]

[7] DaltonR. Deep thoughts-North America is about to come under intense geophysical scrutiny. Nature, 2000, 405(6785): 390-392 J]

[8] CaiM-f, LiP, TanW-h, et al. . Key engineering technologies to achieve green, intelligent, and sustainable development of deep metal mines in China. Engineering, 2021, 7(11): 1513-1517 J]

[9] GAO Ming-zhong, LI Fei, QIU Zhi-qiang, et al. Mechanical behaviors of segments in small curvature radius intervals of shield tunnels: From field monitoring to laboratory testing [J]. Rock Mechanics and Rock Engineering, 2023. DOI: https://doi.org/10.1007/s00603-023-03488-9.

[10] ZhangA-l, XieH-p, ZhangR, et al. . Mechanical properties and energy characteristics of coal at different depths under cyclic triaxial loading and unloading. International Journal of Rock Mechanics and Mining Sciences, 2023, 161: 105271 J]

[11] ZhangA-l, XieH-p, ZhangR, et al. . Dynamic failure behavior of Jinping marble under various preloading conditions corresponding to different depths. International Journal of Rock Mechanics and Mining Sciences, 2021, 148104959 J]

[12] LiF, YouS, JiH-g, et al. . Strength and energy exchange of deep sandstone under high hydraulic conditions. Journal of Central South University, 2020, 27(10): 3053-3062 J]

[13] RanjithP G, ZhaoJ, JuM-h, et al. . Opportunities and challenges in deep mining: A brief review. Engineering, 2017, 3(4): 546-551 J]

[14] DuX-h, XueJ-h, ShiY, et al. . Triaxial mechanical behaviour and energy conversion characteristics of deep coal bodies under confining pressure. Energy, 2023, 266126443 J]

[15] SiX-f, HuangL-q, GongF-q, et al. . Experimental investigation on influence of loading rate on rockburst in deep circular tunnel under true-triaxial stress condition. Journal of Central South University, 2020, 27(10): 2914-2929 J]

[16] GaoM-z, ZhangZ-l, YinX-g, et al. . The location optimum and permeability-enhancing effect of a low-level shield rock roadway. Rock Mechanics and Rock Engineering, 2018, 51(9): 2935-2948 J]

[17] TangM-y, GaoM-z, LiS-w, et al. . Failure behavior and energy evolution characteristics of deep roadway sandstone under different microwave irradiation modes. Journal of Central South University, 2023, 30(1): 214-226 J]

[18] ZieglerM, ValleyB. Evaluation of the diametrical core deformation and discing analyses for in-situ stress estimation and application to the 4.9 km deep rock core from the Basel Geothermal Borehole, Switzerland. Rock Mechanics and Rock Engineering, 2021, 54(12): 6511-6532 J]

[19] LiuS-j, LanH-x, MartinC D. Effect of disturbance on the progressive failure process of Eastern Himalayan Gneiss. Engineering Geology, 2023, 312106936 J]

[20] ZhengM-z, LiS-j, YaoZ, et al. . Core discing characteristics and mitigation approach by a novel developed drill bit in deep rocks. Journal of Central South University, 2020, 27(10): 2822-2833 J]

[21] LuT, GaoM-z, ZhangR, et al. . Exploration on stress mechanism of deep disked core. Advanced Engineering Sciences, 2018, 50(5): 47-54[J]

[22] ZhangF-s, LiM-l, ZhangC-y, et al. . Study on fracture propagation and formation mechanism of core discing at depth under high in-situ stresses. Chinese Journal of Rock Mechanics and Engineering, 2022, 41(3): 533-542[J]

[23] IshidaT, SaitoT. Observation of core discing and in situ stress measurements; Stress criteria causing core discing. Rock Mechanics and Rock Engineering, 1995, 28(3): 167-182 J]

[24] HuangH-x, FanP-x, LiJ, et al. . A theoretical explanation for rock core disking in triaxial unloading test by considering local tensile stress. Acta Geophysica, 2016, 64(5): 1430-1445 J]

[25] AnL, JinC-y, LiuD, et al. . Mechanism of core discing in the relaxation zone around an underground opening under high in situ stresses. Bulletin of Engineering Geology and the Environment, 2018, 77(3): 1179-1189 J]

[26] WuS-c, WuH-y, KemenyJ. Three-dimensional discrete element method simulation of core disking. Acta Geophysica, 2018, 66(3): 267-282 J]

[27] ZhongS, JiangQ, LiuC, et al. . In-site core disking phenomenon and break mechanism of hard marble: Investigation in 2400 m deep-buried underground laboratory. Journal of Central South University, 2020, 27(10): 2959-2970 J]

[28] HuaA-z, YouM-qing. Rock failure due to energy release during unloading and application to underground rock burst control. Tunnelling and Underground Space Technology, 2001, 16(3): 241-246 J]

[29] LiJ, FanP-x, WangM-yang. The stress conditions of rock core disking based on an energy analysis. Rock Mechanics and Rock Engineering, 2019, 52(2): 465-470 J]

[30] LimS S, MartinC D. Core disking and its relationship with stress magnitude for Lac du Bonnet granite. International Journal of Rock Mechanics and Mining Sciences, 2010, 47(2): 254-264 J]

[31] LiY Y, SchmittD R. Drilling-induced core fractures and in situ stress. Journal of Geophysical Research: Solid Earth, 1998, 103(B3): 5225-5239 J]

[32] MatsukiK, KagaN, YokoyamaT, et al. . Determination of three dimensional in situ stress from core discing based on analysis of principal tensile stress. International Journal of Rock Mechanics and Mining Sciences, 2004, 41(7): 1167-1190 J]

[33] BungerA P. Stochastic analysis of core discing for estimation of in situ stress. Rock Mechanics and Rock Engineering, 2010, 43(3): 275-286 J]

[34] YangM-q, LiJ-n, GaoM-z, et al. . Experimental study on nonlinear mechanical behavior and sampling damage characteristics of rocks from depths of 4900–6830 m in Well Songke-2. Journal of Central South University, 2023, 30(4): 1296-1310 J]

[35] LiG-d, BodahiF, HeT, et al. . Sensitivity analysis of macroscopic mechanical behavior to microscopic parameters based on PFC simulation. Geotechnical and Geological Engineering, 2022, 40(7): 3633-3641 J]

[36] PotyondyD O, CundallP A. A bonded-particle model for rock. International Journal of Rock Mechanics and Mining Sciences, 2004, 41(8): 1329-1364 J]

[37] LotidisM A, NomikosP P, SofianosA I. Numerical study of the fracturing process in marble and plaster hollow plate specimens subjected to uniaxial compression. Rock Mechanics and Rock Engineering, 2019, 52(11): 4361-4386 J]

[38] XieH-p, PengR-d, JuYang. Energy dissipation of rock deformation and fracture. Chinese Journal of Rock Mechanics and Engineering, 2004, 23(21): 3565-3570[J]

[39] XieH-p, JuY, LiL-y, et al. . Criteria for strength and structural failure of rocks based on energy dissipation and energy release principles. Chinese Journal of Rock Mechanics and Engineering, 2005, 24(17): 3003-3010[J]

[40] ZhangH-w, RongH, HanJ, et al. . Study on rock core discing mechanism based on stress and energy principle. Chinese Journal of Applied Mechanics, 2014, 31(4): 512-517[J]

[41] ZhouX, ZhangD-m, LiY-y, et al. . Numerical simulation and theoretical analysis of coal-rock meso-mechanics on core discing. Arabian Journal of Geosciences, 2022, 15(6): 471 J]

[42] YE Si-qi, LI Jia-nan, XIE Jing, et al. Exploration on formation mechanism of core discing based on energy analysis [J]. Geofluids, 2022: 9719509. DOI: https://doi.org/10.1155/2022/9719509.

[43] YabeY, AbeS, HofmannG, et al. . Stress state in the source region of Mw2.2 earthquake in a deep gold mine in South Africa determined from borehole cores. Pure and Applied Geophysics, 2022, 17951679-1700 J]

[44] XiaoP, LiD-y, ZhaoG-y, et al. . New criterion for the spalling failure of deep rock engineering based on energy release. International Journal of Rock Mechanics and Mining Sciences, 2021, 148104943 J]

[45] YANG Ben-gao, XIE Jing, YANG Yi-ming, et al. Anisotropy and size effect of the fractal characteristics of rock fracture surfaces under microwave irradiation: An experimental research [J]. Fractals, 2023. DOI: https://doi.org/10.1142/s0218348x23401230.

[46] GaoM-z, ZhangJ-g, LiS-w, et al. . Calculating changes in the fractal dimension of surface cracks to quantify how the dynamic loading rate affects rock failure in deep mining. Journal of Central South University, 2020, 27(10): 3013-3024 J]

[47] AiT, ZhangR, ZhouH-w, et al. . Box-counting methods to directly estimate the fractal dimension of a rock surface. Applied Surface Science, 2014, 314610-621 J]

[48] GaoM-z, ZhangR, XieJ, et al. . Field experiments on fracture evolution and correlations between connectivity and abutment pressure under top coal caving conditions. International Journal of Rock Mechanics and Mining Sciences, 2018, 111: 84-93 J]

[49] YangB-g, GaoM-z, XieJ, et al. . Exploration of weakening mechanism of uniaxial compressive strength of deep sandstone under microwave irradiation. Journal of Central South University, 2022, 29(2): 611-623 J]

[50] GaoM-z, HaoH-c, XueS-n, et al. . Discing behavior and mechanism of cores extracted from Songke-2 well at depths below 4500 m. International Journal of Rock Mechanics and Mining Sciences, 2022, 149104976 J]

[51] LiZ-h, LiS-j, FengX-t, et al. . Characteristics and formation mechanism of core discing in deep rock mass. Chinese Journal of Rock Mechanics and Engineering, 2011, 30(11): 2254-2266[J]

[52] TangH, LiangD-c, WuZ-j, et al. . Preliminary study on the phenomenon and mechanism of granite core discing in laboratory drilling test. Applied Sciences-Basel, 2023, 131291 J]

[53] KongL-w, XieH-p, LiC-bao. Coupled microplane and micromechanics model for describing the damage and plasticity evolution of quasi-brittle material. International Journal of Plasticity, 2023, 162103549 J]