Effects of femtosecond laser micropatterning on the surface properties and cellular response of biomedical tantalum-blended composites

Abstract

Poly(ε-caprolactone) (PCL) holds unique bioresorbability and competent biomechanical properties for tissue-engineering application. However, PCL is hydrophobic intrinsically and poor in cell-biomaterial interaction. In this study, we prepared a composite based on PCL and bioactive tantalum (Ta) to understand the effects of direct laser micropatterning on composite surface properties. The PCL/Ta composite after preparation was surface-patterned by femtosecond laser and characterized with surface morphology, crystal structure, chemical composition, wettability and cellular response of fibroblast. It was found that laser micropatterning enlarged the difference of wetting properties (∼15°) on PCL and PCL/Ta surfaces. The wetting changes was dependent on both material composition and laser-machined geometry. The blending of Ta enhanced surface wettability with prolonged contact time on the laser-machined line and rectangle microarrays. In vitro culture results showed beneficial effects of laser micropatterning on cell morphology of the fibroblasts. On the PCL/Ta surfaces with line and rectangle microarrays, the cells were more likely to bridge the sidewalls of the microgrooves, showing adaptive 3D morphologies to the micro/nano topographies on the sidewalls. These findings are envisaged to facilitate surface design and micropattern optimization for favorable tuning the cell response to biomedical PCL/Ta composites.

Keywords

laser micropatterning / biomaterials / poly(ε-caprolactone) / tantalum

References

[1] BartnikowskiM, DargavilleT R, IvanovskiS, et al. . Degradation mechanisms of polycaprolactone in the context of chemistry, geometry and environment [J]. Progress in Polymer Science, 2019, 96: 1-20

[2] WoodruffM A, HutmacherD W. The return of a forgotten polymer—Polycaprolactone in the 21st century [J]. Progress in Polymer Science, 2010, 35(10): 1217-1256

[3] CiardelliG, ChionoV, VozziG, et al. . Blends of poly-(epsilon-caprolactone) and polysaccharides in tissue engineering applications [J]. Biomacromolecules, 2005, 6(4): 1961-1976

[4] ChengZ, TeohS H. Surface modification of ultra thin poly (epsilon-caprolactone) films using acrylic acid and collagen [J]. Biomaterials, 2004, 25(11): 1991-2001

[5] ZhangW, WangZ, XieC, et al. . Scaffold with micro/macro-architecture for myocardial alignment engineering into complex 3D cell patterns [J]. Advanced Healthcare Materials, 2019, 8(22): e1901015

[6] LiuX, LiuR, GuY, et al. . Nonmonotonic self-deformation of cell nuclei on topological surfaces with micropillar array [J]. ACS Applied Materials & Interfaces, 2017, 92218521-18530

[7] ZhongF, HuW, ZhuP, et al. . Piezoresistive design for electronic skin: From fundamental to emerging applications [J]. Opto-Electronic Advances, 2022, 5(8): 210029

[8] VorobyevA Y, GuoC. Making human enamel and dentin surfaces superwetting for enhanced adhesion [J]. Applied Physics Letters, 2011, 9919193703

[9] VorobyevA Y, GuoC. Direct femtosecond laser surface nano/microstructuring and its applications [J]. Laser & Photonics Reviews, 2013, 73385-407

[10] YangY, YangJ, LiangC, et al. . Surface microstructuring of Ti plates by femtosecond lasers in liquid ambiences: A new approach to improving biocompatibility [J]. Optics Express, 2009, 17(23): 21124-21133

[11] LiuR, DingJ. Chromosomal repositioning and gene regulation of cells on a micropillar array [J]. ACS Applied Materials & Interfaces, 2020, 12(32): 35799-35812

[12] ZhongF, LiuJ, XuP, et al. . Biocompatible composite for strain sensor engineering via temperature regulation on single-axial drawing [J]. Materials Technology, 2022, 37(12): 2022-2031

[13] VijayavenkataramanS, ThaharahS, ZhangS, et al. . Electrohydrodynamic jet 3D-printed PCL/PAA conductive scaffolds with tunable biodegradability as nerve guide conduits (NGCs) for peripheral nerve injury repair [J]. Materials & Design, 2019, 162: 171-184

[14] HuX, MeiS, WangF, et al. . Implantable PEKK/tantalum microparticles composite with improved surface performances for regulating cell behaviors, promoting bone formation and osseointegration [J]. Bioactive Materials, 2021, 6(4): 928-940

[15] ZhangW, WangX, ZhangR, et al. . Effects of integrated bioceramic and uniaxial drawing on mechanically-enhanced fibrogenesis for bionic periosteum engineering [J]. Colloids and Surfaces B: Biointerfaces, 2022, 214112459

[16] DarmaninT, GuittardF. Recent advances in the potential applications of bioinspired superhydrophobic materials [J]. Journal of Materials Chemistry A, 2014, 2(39): 16319-16359

[17] WangZ, DuZ, ChanJ K Y, et al. . Direct laser microperforation of bioresponsive surface-patterned films with through-hole arrays for vascular tissue-engineering application [J]. ACS Biomaterials Science & Engineering, 2015, 1(12): 1239-1249

[18] WangZ, TeohS H, HongM, et al. . Dual-microstructured porous, anisotropic film for biomimicking of endothelial basement membrane [J]. ACS Applied Materials & Interfaces, 2015, 7(24): 13445-13456