Effect of pulsed electromagnetic frequency on the microstructure, wear and solid erosion resistance of CrAlN coatings deposited by arc ion plating

Abstract

In this work, the chromium aluminum nitride (CrAlN) coatings were prepared on TC11 titanium alloy by composite magnetic field cathodic arc ion plating with controllable pulse electromagnetic combined with permanent magnet. The effects of electromagnetic frequency on the morphology, microstructure, nano-hardness and elastic modulus of the coatings were investigated by scanning electron microscope (SEM), X-ray diffraction (XRD) and nano-indenter. This paper has mainly studied the influence of CrAlN coatings which are prepared at various electromagnetic frequencies on the wear and erosion resistance through a series of wear and solid particle erosion experiments. It was found that the deposition rate of CrAlN coatings increases with the increase of electromagnetic frequency. And CrAlN coatings all preferentially grew along the (111) crystal plane. At 16.7 Hz, with the increase of pulsed electromagnetic frequency, the hardness is the highest (23.6 GPa) and the adhesion is the highest (41.5 N). In addition, the coating deposition exhibited the best wear and solid erosion resistance at 16.7 Hz and 33.3 Hz, the friction coefficient is about 0.35, and the erosion rate is about 0.2 µm/g at 30° and less than 1 µm/g at 90°, respectively. These results indicate that the CrAlN coating formed at an appropriate pulsed electromagnetic frequency can achieve excellent mechanical properties, wear and solid erosion resistance.

Keywords

CrAlN coating / compound magnetic field / pulse electromagnetic frequency / mechanical property

References

[1] LI Dong, HUI Song-xiao, YE Wen-jun, et al. Microstructure and mechanical properties of a new high-strength and high-toughness titanium alloy [J]. Rare Metals, 2016: 1–7. DOI: https://doi.org/10.1007/s12598-016-0722-7.

[2] HuangL, KinnellP, ShipwayP H. Removal of heat-formed coating from a titanium alloy using high pressure waterjet: Influence of machining parameters on surface texture and residual stress [J]. Journal of Materials Processing Technology, 2015, 223: 129-138

[3] RevankarG D, ShettyR, RaoS S, et al.. Wear resistance enhancement of titanium alloy (Ti−6Al−4V) by ball burnishing process [J]. Journal of Materials Research and Technology, 2017, 6(1): 13-32

[4] RajaA R I, RedzuwanB I, Abdul AzizM S, et al.. Comparative study of tool wear in milling titanium alloy (Ti−6Al−4V) using PVD and CVD coated cutting tool [J]. Industrial Lubrication and Tribology, 2017, 69(3): 363-370

[5] LinS, ZhouK, DaiM, et al.. Structural, mechanical, and sand erosion properties of TiN/Zr/ZrN multilayer coatings [J]. Vacuum, 2015, 122: 179-186

[6] KumariR, MajumdarJ D. Wear behavior of plasma spray deposited and post heat-treated hydroxyapatite (HA) — based composite coating on titanium alloy (Ti−6Al−4V) substrate [J]. Metallurgical and Materials Transactions A, 2018, 49(7): 3122-3132

[7] MartiniC, CeschiniL, CasadeiB, et al.. Dry sliding behaviour of hydrogenated amorphous carbon (a-C: H) coatings on Ti−6Al−4V [J]. Wear, 2011, 271(9–10): 2025-2036

[8] BaloyiN M, PopoolaA P I, PityanaS L. Microstructure, hardness and corrosion properties of laser processed Ti₆Al₄V-based composites [J]. Transactions of Nonferrous Metals Society of China, 2015, 25(9): 2912-2923

[9] SongG, LuoZ, LiF, et al.. Microstructure and indentation toughness of Cr/CrN multilayer coatings by arc ion plating [J]. Transactions of Nonferrous Metals Society of China, 2015, 25(3): 811-816

[10] WangD, LinS, LiuL, et al.. Micro-nano multilayer structure design and solid particle erosion resistance performance of CrAlN_x/CrAlN coating [J]. Vacuum, 2020, 172: 109064

[11] BaiX, LiJ, ZhuL, et al.. Effect of Cu content on microstructure, mechanical and anti-fouling properties of TiSiN−Cu coating deposited by multi-arc ion plating [J]. Applied Surface Science, 2018, 427444-451

[12] SanchetteF, DucrosC, SchmittT, et al.. Nanostructured hard coatings deposited by cathodic arc deposition: From concepts to applications [J]. Surface and Coatings Technology, 2011, 205(23–24): 5444-5453

[13] FengC. Effect of shielded plate size on the microstructure and tribological properties of TiAlN coating prepared by arc ion plating[J]. Tribology, 2013, 33(6): 606-613(in Chinese)

[14] MartinP J, BendavidA. Review of the filtered vacuum arc process and materials deposition [J]. Thin Solid Films, 2001, 394(1–2): 1-14

[15] ASTM G76-13. Standard test method for conducting erosion tests by solid particleimpingement using gas jets [S]. 2013.

[16] ChenH, ChenK, XuY, et al.. Microstructure, mechanical properties, and milling performance of arc-PVD AlTiN−Cu and AlTiN/AlTiN−Cu coatings [J]. Journal of Central South University, 2018, 25(3): 506-515

[17] AbadiasG. Stress and preferred orientation in nitride-based PVD coatings [J]. Surface and Coatings Technology, 2008, 202(11): 2223-2235

[18] PellegJ, ZevinL Z, LungoS, et al.. Reactive-sputter-deposited TiN films on glass substrates [J]. Thin Solid Films, 1991, 197(1–2): 117-128

[19] DetorA J, HodgeA M, ChasonE, et al.. Stress and microstructure evolution in thick sputtered films [J]. Acta Materialia, 2009, 57(7): 2055-2065

[20] LiL, WangL, ZhaoL, et al.. Microstructure and adhesion strength of NiAl coating prepared on Q235 substrate by combustion synthesis assisted with Cu−Zn interlayer [J]. Surface and Coatings Technology, 2018, 344: 564-571

[21] ChangH, HuangP, YehJ W, et al.. Influence of substrate bias, deposition temperature and post-deposition annealing on the structure and properties of multi-principal-component (AlCrMoSiTi)N coatings [J]. Surface and Coatings Technology, 2008, 202(14): 3360-3366

[22] LeeJ W, KuoY, WangC J, et al.. Effects of substrate bias frequencies on the characteristics of chromium nitride coatings deposited by pulsed DC reactive magnetron sputtering [J]. Surface and Coatings Technology, 2008, 203(5–7): 721-725

[23] FreemanJ A, KellyP J, WestG T, et al.. The effects of composition and pulsed biasing on chromium nitride films [J]. Surface and Coatings Technology, 2009, 204(6–7): 907-910

[24] DückA, GamerN, GesatzkeW, et al.. Ti/TiN multilayer coatings: Deposition technique, characterization and mechanical properties [J]. Surface and Coatings Technology, 2001, 142–144: 579-584

[25] EichnerD, SchlieterA, LeyensC, et al.. Solid particle erosion behavior of nanolaminated Cr₂AlC films [J]. Wear, 2018, 402–403: 187-195

[26] ANDERS A. Cathodic arcs: From fractal spots to energetic condensation [M]. Springer, 2008. DOI: https://doi.org/10.1007/978-0-38779108-1.

[27] LangW C, XiaoJ Q, GongJ, et al.. Study on cathode spot motion and macroparticles reduction in axisymmetric magnetic field-enhanced vacuum arc deposition [J]. Vacuum, 2010, 84(9): 1111-1117