Application of response surface methodology in optimization of bioleaching parameters for high-magnesium nickel sulfide ore

Abstract

The response surface methodology (RSM) was used to optimize the operating parameters during the bioleaching of Jinchuan high-magnesium nickel sulfide ore. The particle size, acid addition, pulp density and inoculation amount were chosen as the investigated parameters. To maximize the leaching efficiency of nickel, copper, cobalt and minimize the dissolution of magnesium and iron ions, the model suggested a combination of optimal parameters of particles less than 0.074 mm being 72.11%, sulfuric acid addition being 300 kg/t, pulp density being 5% and inoculation amount being 12.88%. Under the conditions, the average results of three parallel experiments were 89.43% of nickel leaching efficiency, 36.78% of copper leaching efficiency, 84.07% of cobalt leaching efficiency, 49.19% of magnesium leaching efficiency and 0.20 g/L of iron concentration. The model indicated that the most significant factor in response of the leaching efficiency of valuable metal is the particle size, and the most significant factor in response to the leaching efficiency of harmful ions (Mg²⁺) is the amount of sulfuric acid addition. And according to the suggested models, no significance of the interaction effect between particle size and acid addition was shown. Under the optimized parameters suggested by models, the valuable metals could be separated from harmful ions during the bioleaching process.

Keywords

high-magnesium nickel sulfide ore / bioleaching / response surface methodology / particle size / acid consumption

References

[1] MuddG M, JowittS M. A detailed assessment of global nickel resource trends and endowments [J]. Economic Geology, 2014, 109(7): 1813-1841

[2] ChenW, YinS, IlankoonI M S K. Effects of forced aeration on community dynamics of free and attached bacteria in copper sulphide ore bioleaching [J]. International Journal of Minerals, Metallurgy and Materials, 2022, 29(1): 59-69

[3] RemonsellezF, GalleguillosF, Moreno-PazM, et al.. Dynamic of active microorganisms inhabiting a bioleaching industrial heap of low-grade copper sulfide ore monitored by real-time PCR and oligonucleotide prokaryotic acidophile microarray [J]. Microbial Biotechnology, 2009, 2(6): 613-624

[4] WangJ, QinW, ZhangY, et al.. Bacterial leaching of chalcopyrite and bornite with native bioleaching microorganism [J]. Transactions of Nonferrous Metals Society of China, 2008, 18(6): 1468-1472

[5] Riekkola-VanhanenM. Talvivaara mining company-From a project to a mine [J]. Minerals Engineering, 2013, 48: 2-9

[6] HalinenA K, RahunenN, MäättäK, et al.. Microbial community of the talvivaara demonstration-scale bioheap [J]. Advanced Materials Research, 2007, 20–21579

[7] WenJ, ChenB, ShangH, et al.. Research progress in biohydrometallurgy of rare metals and heavy nonferrous metals with an emphasis on China [J]. Rare Metals, 2016, 35(6): 433-442

[8] WangJ, ZhaoH, QinW, et al.. Bioleaching of complex polymetallic sulfide ores by mixed culture [J]. Journal of Central South University, 2014, 21(7): 2633-2637

[9] ZhenS, QinW, YanZ, et al.. Bioleaching of low grade nickel sulfide mineral in column reactor [J]. Transactions of Nonferrous Metals Society of China, 2008, 18(6): 1480-1484

[10] ZhenS, YanZ, ZhangY, et al.. Column bioleaching of a low grade nickel-bearing sulfide ore containing high magnesium as olivine, chlorite and antigorite [J]. Hydrometallurgy, 2009, 96(4): 337-341

[11] ZhaoM, FangJ, ZhangL, et al.. Improving the estimation accuracy of copper oxide leaching in an ammonia — ammonium system using RSM and GABPNN [J]. Russian Journal of Non-Ferrous Metals, 2017, 58(6): 591-599

[12] ChenS, ChenW H. Thermophilic bioleaching of heavy metals from waste sludge using response surface methodology [J]. Journal of Environmental Science and Health Part A, Toxic/Hazardous Substances & Environmental Engineering, 2013, 48(9): 1094-1104

[13] TangsiriR, Nezamzadeh-EjhiehA. Cadmium sulfide nanoparticles: Synthesis, brief characterization and experimental design by response surface methodology (RSM) in the photodegradation of ranitidine hydrochloride [J]. Chemical Physics Letters, 2020, 758137919

[14] ZhangZ, PengJ, SrinivasakannanC, et al.. Leaching zinc from spent catalyst: Process optimization using response surface methodology [J]. Journal of Hazardous Materials, 2010, 176(1–3): 1113-1117

[15] SilvermanM P, LundgrenD G. Studies on the chemoautotrophic iron bacterium Ferrobacillus ferrooxidans. I. An improved medium and a harvesting procedure for securing high cell yields [J]. Journal of Bacteriology, 1959, 77(5): 642-647

[16] FangJ, LiuY, HeW, et al.. Transformation of iron in pure culture process of extremely acidophilic microorganisms [J]. Transactions of Nonferrous Metals Society of China, 2017, 27(5): 1150-1155

[17] SunJ, WenJ, ChenB, et al.. Mechanism of Mg²⁺ dissolution from olivine and serpentine: Implication for bioleaching of high-magnesium nickel sulfide ore at elevated pH [J]. International Journal of Minerals, Metallurgy, and Materials, 2019, 26(9): 1069-1079

[18] CameronR A, LastraR, MortazaviS, et al.. Bioleaching of a low-grade ultramafic nickel sulphide ore in stirred-tank reactors at elevated pH [J]. Hydrometallurgy, 2009, 97(34): 213-220