Improving performance of flat plate solar collector using nanofluid water/zinc oxide

Abstract

In this article, the effect of using water/zinc oxide nanofluid as a working fluid on the performance of solar collector is investigated experimentally. The volumetric concentration of nanoparticles is 0.4%, and the particle size is 40 nm, and the mass flow rate of the fluid varies from 1 to 3 kg/min. For this experiment, a device has been prepared with appropriate measuring instruments whose energy source is solar radiation. The solar energy absorbed by the flat plate collector is absorbed by the nanofluid of water/zinc oxide. The nanofluid is pumped to the consumer, a heat exchanger, where it heats the water. The temperature, radiation level, flow rate, and pressure in different parts of the device were measured. The pressure drop and the heat transferred are the most important results of this experimental work. The ASHRAE standard is used to calculate efficiency. The results showed that the use of water/zinc oxide nanofluid increases the collector performance compared to water. For 1 kg/min of mass flow rate, the nanofluids have a 16% increase in efficiency compared to water. From the results, it can be concluded that the choice of optimum mass flow rate in both water and nanofluid cases increases efficiency.

Keywords

solar collector / suspension / solar heating system / collector efficiency / water/zinc oxide nanofluid

References

[1] AndersonBSolar energy: Fundamentals in building design [M], 1977, New York, McGrawHill

[2] SAYIGH A A W. Renewable energy: global progress and examples [R]. WREN, 2001.

[3] JohansonTB, KellyH, ReddyA K N, WiliamsR HRenewable energysources for fuels and electricity [M], 1993, Washington, DC, Island Press

[4] STINE W B. Power from the sun: Principles of high temperature solar thermal technology [R]. NASA STIB, 1987.

[5] ChoiU SEnhancing thermal conductivity of fluids with nanoparticles, development and applications of non-Newtonian flows [R], 1995, Washington DC, Depantment of Energy

[6] BeckMThermal conductivity of metal oxide nanofluids [D], 2008, Atlanta, Georgia Institute of Technology

[7] XuanY-m, RoetzelW. Conceptions for heat transfer correlation of nanofluids [J]. International Journal of Heat and Mass Transfer, 2000, 43(19): 3701-3707

[8] ChoiS U S, YuW, HullJ R, ZhangZ G, LockwoodF E. Nanofluids for vehicle thermal management [C]. Proceeding of the 2001 Vehicle Thermal Management System Conference, 2001, Warrendale, PA, United States, SAE International, 139144

[9] KeblinskiP, NayakS K, ZapolP, AjayanP M. Charge distribution and stability of charged carbon nanotubes [J]. Physical Review Letters, 2002, 89(25): 255503

[10] WangX-q, MujumdarA S. A review on nanofluidspart II: Experiments and applications [J]. Brazilian Journal of Chemical Engineering, 2008, 254631-648

[11] DassK. Nanofluids—the cooling medium of the future [J]. Heat Transfer Engineering, 2006, 27(10): 1-2

[12] LEE S, CHOI S U S. Application of metallic nanoparticle suspensions [R]. ANL, 1997.

[13] SaidurR, LeongK Y, MohammedH A. A review on applications and challenges of nanofluids [J]. Renewable and Sustainable Energy Reviews, 2011, 15(3): 1646-1668

[14] SaniE, MercatelliL, BarisonS, PaguraC, AgrestiF, CollaL, SansoniP. Potential of carbon nanohorn-based suspensions for solar thermal collectors [J]. Solar Energy Materials and Solar Cells, 2011, 95(11): 2994-3000

[15] TaylorR A, PhelanP E, OtanicarT P, AdrianR, PrasherR. Nanofluid optical property characterization: Towards efficient directabsorptionsolar collectors [J]. Nanoscale Res Lett, 2011, 6(1): 225

[16] OtanicarT P, PhelanP E, PrasherR S, RosengartenG, TaylorR A. Nanofluid-based direct absorption solar collector [J]. Journal of Renewable and Sustainable Energy, 2010, 23033102

[17] KimJ K, JungJ Y, KangY T. The effect of nano-particles on the bubble absorption performance in a binary nanofluid [J]. International Journal of Refrigeration, 2006, 29122-29

[18] NATARAJAN E, SATHISH R. Role of nanofluids in solar water heater [J]. The International Journal of Advanced Manufacturing Technology, 2009:1-5. DOI: https://doi.org/10.1007/s00170-008-1876-8.

[19] GRIMM A. Powdered aluminum-containing heat transfer fluids: German Patent DE 4131516A1 [P]. 1993.

[20] FaulknerD, KhotanM, ShekarrizR. Practical design of a 1000 W/cm² cooling system [C]. Annual IEEE Semiconductor Thermal Measurement and Management Symposium, 2003, San Jose, CA, United States, IEEE, 223230

[21] NguyenC T, RoyG, GauthierC, GalanisN. Heat transfer enhancement using Al₂O₃-water nanofluid for an electronic liquid cooling system [J]. Applied Thermal Engineering, 2007, 27(89): 1501-1506

[22] MohammedhA, BhaskaranG, ShuaibN H, SaidurR. Heat transfer and fluid flow characteristics in microchannels heat exchanger using nanofluids: A review [J]. Renewable and Sustainable Energy Reviews, 2011, 15(3): 1502-1512

[23] KhullarV, TyagiH. A study on environmental impact of nanofluid-based concentrating solar water heating system [J]. International Journal of Environmental Studies, 2012, 69(2): 220-232

[24] MohammedhA, BhaskaranG, ShuaibN H, SaidurR. Heat transfer and fluid flow characteristics in microchannels heat exchanger using nanofluids: A review [J]. Renewable and Sustainable Energy Reviews, 2011, 15(3): 1502-1512

[25] SamiS. Analysis of nanofluids behavior in a PV-thermal-driven organic Rankine cycle with cooling capability [J]. Applied System Innovation, 2020, 3(1): 12

[26] ChoudharyS, SachdevaA, KumarP. Influence of stable zinc oxide nanofluid on thermal characteristics of flat plate solar collector [J]. Renewable Energy, 2020, 152: 1160-1170

[27] ShirzadM, AjarostaghiS S M, DelavarM A, SedighiK. Improve the thermal performance of the pillow plate heat exchanger by using nanofluid: Numerical simulation [J]. Advanced Powder Technology, 2019, 30(7): 1356-1365

[28] OlfianH, ZabihiS A, MousaviA S S. Numerical evaluation of the thermal performance of a solar air heater equipped with two different types of baffles [J]. Heat Transfer, 2020, 49(3): 1149-1169

[29] MOUSAVIAJAROSTAGHI S S, SHIRZAD M, RASHIDI S, LIL K B. Heat transfer performance of a nanofluid-filled tube with wall corrugations and center-cleared twisted-tape inserts [J]. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2020: 1841860. DOI: https://doi.org/10.1080/15567036.2020.1841860.

[30] OlfianH, AjarostaghiS S M, EbrahimnatajM. Development on evacuated tube solar collectors: A review of the last decade results of using nanofluids [J]. Solar Energy, 2020, 211265-282

[31] OlfianH, AjarostaghiS S M, FarhadiM, RamiarA. Melting and solidification processes of phase change material in evacuated tube solar collector with U-shaped spirally corrugated tube [J]. Applied Thermal Engineering, 2021, 182: 116149

[32] MajidS, MohammadJ. Optimal selection of annulus radius ratio to enhance heat transfer with minimum entropy generation in developing laminar forced convection of water-Al₂O₃ nanofluid flow [J]. Journal of Central South University, 2017, 24(8): 1850-1865

[33] LiD-p, WangY-f, LiuG, LiaoS-m, LiuX-ping. Effect of obstruction on thermal performance of solar water heaters [J]. Journal of Central South University, 2020, 27(4): 1273-1289

[34] NazariM A, AhmadiM H, SadeghzadehM, ShafiiM B, GoodarziM. A review on application of nanofluid in various types of heat pipes [J]. Journal of Central South University, 2019, 26(5): 1021-1041

[35] SiavashiM, Miri JoibaryS M. Numerical performance analysis of a counter-flow double-pipe heat exchanger with using nanofluid and both sides partly filled with porous media [J]. Journal of Thermal Analysis and Calorimetry, 2019, 135(2): 1595-1610

[36] HeyhatM M, MousaviS, SiavashiM. Battery thermal management with thermal energy storage composites of PCM, metal foam, fin and nanoparticle [J]. Journal of Energy Storage, 2020, 28101235

[37] NorouziA M, SiavashiM, AhmadiR, TahmasbiM. Experimental study of a parabolic trough solar collector with rotating absorber tube [J]. Renewable Energy, 2021, 168734-749

[38] NorouziA M, SiavashiM, KhalijiO M. Efficiency enhancement of the parabolic trough solar collector using the rotating absorber tube and nanoparticles [J]. Renewable Energy, 2020, 145: 569-584

[39] SiavashiM, GhasemiK, YousofvandR, DerakhshanS. Computational analysis of SWCNH nanofluid-based direct absorption solar collector with a metal sheet [J]. Solar Energy, 2018, 170: 252-262

[40] RashidiS, HosseinK M, HormoziF. Potential applications of inserts in solar thermal energy systems—A review to identify the gaps and frontier challenges [J]. Solar Energy, 2018, 171: 929-952

[41] RashidiS, KarimiN, MahianO, AbolfazliesfahaniJ. A concise review on the role of nanoparticles upon the productivity of solar desalination systems [J]. Journal of Thermal Analysis and Calorimetry, 2019, 135(2): 1145-1159

[42] RashidiS, YangL, Khoosh-AhangA, JingD, MahianO. Entropy generation analysis of different solar thermal systems [J]. Environmental Science and Pollution Research, 2020, 27(17): 20699-20724

[43] AkbarzadehM, RashidiS, KarimiN, EllahiR. Convection of heat and thermodynamic irreversibilities in two-phase, turbulent nanofluid flows in solar heaters by corrugated absorber plates [J]. Advanced Powder Technology, 2018, 29(9): 2243-2254

[44] RashidiS, JavadiP, EsfahaniJ A. Second law of thermodynamics analysis for nanofluid turbulent flow inside a solar heater with the ribbed absorber plate [J]. Journal of Thermal Analysis and Calorimetry, 2019, 135(1): 551-563

[45] RashidiS, AkbarzadehM, KarimiN, MasoodiR. Combined effects of nanofluid and transverse twisted-baffles on the flow structures, heat transfer and irreversibilities inside a square duct—A numerical study [J]. Applied Thermal Engineering, 2018, 130: 135-148

[46] DuffieJ A, BeckmanW ASolar engineering of thermal processes [M], 2013, Hoboken, NJ, USA, JohnWiley & Sons, Inc.

[47] USA ASHRAE. Methods of testing to determine the thermal performance of flat plate solar collectors containing boiling liquid [J]. Fuel and Energy Abstracts, 1997, 38(4): 244

[48] ZhouL-p, WangB-x, PengX-f, DuX-z, YangY-ping. On the specific heat capacity of CuO nanofluid [J]. Advances in Mechanical Engineering, 2010, 2172085

[49] MILLS A, CHANG B. Error analysis of expriments [D]. University of California, 2004.

[50] YousefiT, VeisyF, ShojaeizadehE, ZinadiniS. An experimental investigation on the effect of MWCNT-H₂O nanofluid on the efficiency of flat-plate solar collectors [J]. Experimental Thermal and Fluid Science, 2012, 39207-212