Surface evolution of Al-Si-Cu alloy in thermal shock under different heating speeds

Abstract

In order to understand the initial surface damage of Al piston in unsteady thermal environment like knock combustion, T6 heat treated cast Al-Si-Cu alloy was thermal shocked under different heating speeds between room temperature and 450 °C by adjusting the environmental temperature. The surface evolution was mainly characterized in view of roughness, hardness, morphology, texture, phase and element distribution. Results indicated that both the roughness and hardness went up to the maximum and then decreased with rising heating speed. Micro-structure and phase analysis suggested that the interactions of solid phase transition and oxidation with enhancing thermal stress took responsible for the surface evolution.

Keywords

Al alloy / piston / thermal shock / heating speed / surface roughness

References

[1] OthmanM F, AdamA, NajafiG, MamatR. Green fuel as alternative fuel for diesel engine: A review [J]. Renewable and Sustainable Energy Reviews, 2017, 80: 694-709

[2] HasannuddinA K, YahyaW J, SarahS, IthninA M, SyahrullailS, SugengD A, RazakI F A, Abd FatahA Y, AqmaW S, RahmanA H A, RamlanN A. Performance, emissions and carbon deposit characteristics of diesel engine operating on emulsion fuel [J]. Energy, 2018, 142: 496-506

[3] LiL-F, ZhangZ-B. Investigation on steam direct injection in a natural gas engine for fuel savings [J]. Energy, 2019, 183: 958-970

[4] SzmytkaF, SalemM, Rézaï-AriaF, OudinA. Thermal fatigue analysis of automotive Diesel piston: Experimental procedure and numerical protocol [J]. International Journal of Fatigue, 2015, 73: 48-57

[5] WangZ, LiuH, ReitzR D. Knocking combustion in spark-ignition engines [J]. Progress in Energy and Combustion Science, 2017, 61: 78-112

[6] NatesR J, YatesA D B. Knock damage mechanisms in spark-ignition engines [J]. SAE International Journal of Fuels & Lubricants, 1994, 103(4): 1970-1980

[7] CavinaN, RojoN, BusinaroA, CeschiniL, BalducciE, CerofoliniA. Analysis of pre-ignition combustions triggered by heavy knocking events in a turbocharged GDI engine [J]. Energy Procedia, 2016, 101: 893-900

[8] BalducciE, CeschiniL, RojoN, CavinaN, CevolaniR, BarichelloM. Knock induced erosion on Al pistons: Examination of damage morphology and its causes [J]. Engineering Failure Analysis, 2018, 92: 12-31

[9] BaoT, LiJ-P, LiuL, LiH-Y, YangZ, GuoY-C, XiaF, YangW, TaoD, ZhengJ-Q. Evolution of Al-Si-Cu alloy in piston of diesel engine during knock damage [J]. Engineering Failure Analysis, 2020, 112: 104501

[10] CeschiniL, MorriA, BalducciE, CavinaN, RojoN, CalogeroL, PoggioL. Experimental observations of engine piston damage induced by knocking combustion [J]. Materials & Design, 2017, 114312-325

[11] LiuH-Q, PangJ-C, WangM, LiS-X, ZhangZ-F. The effect of thermal exposure on the microstructure and mechanical properties of multiphase AlSi₁₂Cu₄MgNi₂ alloy [J]. Materials Characterization, 2020, 159: 110032

[12] TianL-S, GuoY-C, LiJ-P, WangJ-L, DuanH-B, XiaF, LiangM-X. Elevated re-aging of a piston aluminium alloy and effect on the microstructure and mechanical properties [J]. Materials Science and Engineering A, 2018, 738375-379

[13] HumbertjeanA, BeckT. Effect of the casting process on microstructure and lifetime of the Al-piston-alloy AlSi₁₂Cu₄Ni₃ under thermo-mechanical fatigue with superimposed high-cycle fatigue loading [J]. International Journal of Fatigue, 2013, 53: 67-74

[14] TakahashiT, SasakiK. Low cycle thermal fatigue of aluminum alloy cylinder head in consideration of changing metrology microstructure [J]. Procedia Engineering, 2010, 2(1): 767-776

[15] WangM, PangJ C, LiS X, ZhangZ F. Low-cycle fatigue properties and life prediction of Al-Si piston alloy at elevated temperature [J]. Materials Science and Engineering A, 2017, 704: 480-492

[16] BaoT, LiJ-P, LiuL, LiH-Y, YangZ, WangJ-L, GuoY-C, LiB-Y, YangW, ZhengJ-Q. Evolution of surface roughness of a cast Al-Si-Cu piston alloy during thermal exposure [J]. Journal of Central South University, 2020, 27(6): 1645-1653

[17] PombergerS, StoschkaM, AignerR, LeitnerM, EhartR. Areal fatigue strength assessment of cast aluminium surface layers [J]. International Journal of Fatigue, 2020, 133: 105423

[18] Verdalet-GuardiolaX, SaillardR, ForiB, DuluardS, BlancC. Comparative analysis of the anticorrosive properties of trivalent chromium conversion coatings formed on 2024-T3 and 2024-T351 aluminium alloys [J]. Corrosion Science, 2020, 167108508

[19] Al-SamaraiA R A, Haftirman, AhmadK R, AldouriY. Effect of roughness of hypo-and hyper-eutectic Al-Si piston alloy on wear characteristics under lubrication [J]. Procedia Engineering, 2013, 53616-623

[20] ZhangX-S, PengG-Y, DuG-H, SunX-C, JiangG-H, ZengX-M, SunP-F, DengB, XieH-L, WuZ-J, XiaoT-Q. Investigating the microstructures of piston carbon deposits in a large-scale marine diesel engine using synchrotron X-ray microtomography [J]. Fuel, 2015, 142: 173-179

[21] QinZ-J, JiaC-F, ZhangW-Z, WangL-J. Investigations on ablation for highly-intensified diesel engine piston material [J]. Case Studies in Thermal Engineering, 2019, 13: 100371

[22] ReghuV R, ShankarV, RamaswamyP. Challenges in plasma spraying of 8%Y₂O₃-ZrO₂ thermal barrier coatings on Al alloy automotive piston and influence of vibration and thermal fatigue on coating characteristics [J]. Materials Today Proceedings, 2018, 5(11): 23927-23936

[23] WangP, LiJ-P, GuoY-C, WangJ-L, YangZ, LiangM-X. Effect of zirconia Sol on the microstructures and thermal-protective properties of PEO coating on a cast Al-12Si piston alloy [J]. Journal of Alloys and Compounds, 2016, 657703-710

[24] YaoZ-M, HuK-S, LiR. Enhanced high-temperature thermal fatigue property of aluminum alloy piston with nano PYSZ thermal barrier coatings [J]. Journal of Alloys and Compounds, 2019, 790: 466-479

[25] GuL-J, ChenX-L, FanX-Z, LiuY-J, ZouB-L, WangY, CaoX-Q. Improvement of thermal shock resistance for thermal barrier coating on aluminum alloy with various electroless interlayers [J]. Surface and Coatings Technology, 2011, 206(1): 29-36

[26] LiaoY-M, ZhangB, ChenM-H, FengM, WangJ-L, ZhuS-L, WangF-H. Self-healing metal-enamel composite coating and its protection for TiAl alloy against oxidation under thermal shock in NaCl solution [J]. Corrosion Science, 2020, 167: 108526

[27] YanZ, GuoL, LiZ-H, YuY, HeQ-J. Effects of laser glazing on CMAS corrosion behavior of Y₂O₃ stabilized ZrO₂ thermal barrier coatings [J]. Corrosion Science, 2019, 157450-461

[28] ReghuV R, LoboK, BashaA, TilletiP, ShankarV, RamaswamyP. Protection offered by thermal barrier coatings to Al-Si alloys at high temperatures — A microstructural investigation [J]. Materials Today: Proceedings, 2019, 19: 676-681

[29] LiH-J, YaoX-Y, ZhangY-L, LiK-Z, GuoL-J, LiuL. Effect of heat flux on ablation behaviour and mechanism of C/C-ZrB₂-SiC composite under oxyacetylene torch flame [J]. Corrosion Science, 2013, 74: 265-270

[30] XiaoJ, DasO, MensahR A, JiangL, XuQ, BertoF. Ablation behavior studies of charring materials with different thickness and heat flux intensity [J]. Case Studies in Thermal Engineering, 2021, 23: 100814

[31] ZhenX-D, WangY, XuS-Q, ZhuY-S, TaoC-J, XuT, SongM-Z. The engine knock analysis — An overview [J]. Applied Energy, 2012, 92628-636

[32] LiF, QianH-L, ShenM-Q, WangH, YangW. Evolution of microstructure and properties of piston aluminum alloy with high strength and toughness during high temperature aging process [J]. Journal of Xi’an Technological University, 2019, 39(6): 682-687(in Chinese)