Relationship between critical seismic acceleration coefficient and static factor of safety of 3D slopes

Abstract

Many analytical methods have been adopted to estimate the slope stability by providing various stability numbers, e.g. static safety of factor (static FoS) or the critical seismic acceleration coefficient, while little attention has been given to the relationship between the slope stability numbers and the critical seismic acceleration coefficient. This study aims to investigate the relationship between the static FoS and the critical seismic acceleration coefficient of soil slopes in the framework of the upper-bound limit analysis. Based on the 3D rotational failure mechanism, the critical seismic acceleration coefficient using the pseudo-static method and the static FoS using the strength reduction technique are first determined. Then, the relationship between the static FoS and the critical seismic acceleration coefficient is presented under considering the slope angle β, the fractional angle φ, and the dimensionless coefficients B/H and c/γH. Finally, a fitting formula between the static FoS and the critical seismic acceleration coefficient is proposed and validated by analytical and numerical results.

Keywords

static safety of factor / critical seismic acceleration coefficient / upper-bound limit analysis / 3D rotational failure mechanism

References

[1] KrabbenhoftK, LyaminA V. Strength reduction finite-element limit analysis [J]. Géotechnique Letters, 2015, 5(4): 250-253

[2] ShenJ-y, KarakusM, XuC-S. Chart-based slope stability assessment using the generalized Hoek-Brown criterion [J]. International Journal of Rock Mechanics and Mining Sciences, 2013, 64: 210-219

[3] SunZ-b, LiJ-f, PanQ-j, DiasD, LiS-q, HouC-Q. Discrete kinematic mechanism for nonhomogeneous slopes and its application [J]. International Journal of Geomechanics, 2018, 18(12): 04018171

[4] KumarJ, SamuiP. Stability determination for layered soil slopes using the upper bound limit analysis [J]. Geotechnical & Geological Engineering, 2006, 2461803-1819

[5] HeY, LiuY, HazarikaH, YuanR. Stability analysis of seismic slopes with tensile strength cut-off [J]. Computers and Geotechnics, 2019, 112: 245-256

[6] MichalowskiR L, DrescherA. Three-dimensional stability of slopes and excavations [J]. Géotechnique, 2009, 59(10): 839-850

[7] ChengY M, LansivaaraT, WeiW B. Two-dimensional slope stability analysis by limit equilibrium and strength reduction methods [J]. Computers and Geotechnics, 2007, 34(3): 137-150

[8] MajumdarD K. Stability of soil slopes under horizontal earthquake force [J]. Géotechnique, 1971, 21(1): 84-88

[9] SahooP P, ShuklaS K. Taylor’s slope stability chart for combined effects of horizontal and vertical seismic coefficients [J]. Géotechnique, 2019, 69(4): 344-354

[10] ChenW FLimit analysis and soil plasticity [M], 2013, Amsterdam, Elsevier

[11] DrescherA. Limit plasticity approach to piping in bins [J]. Journal of Applied Mechanics, 1983, 50(3): 549-553

[12] MichalowskiR L. Three-dimensional analysis of locally loaded slopes [J]. Géotechnique, 1989, 39(1): 27-38

[13] BalighM M, AzzouzA S. End effects on stability of cohesive slopes [J]. Journal of the Geotechnical Engineering Division, 1975, 101(11): 1105-1117

[14] deB P, GarnierD. Three dimensional bearing capacity analysis of a foundation near a slope [J]. Soils and Foundations, 1998, 38(3): 153-163

[15] YangX-l, XuJ-S. Three-dimensional stability of two-stage slope in inhomogeneous soils [J]. International Journal of Geomechanics, 2017, 17(7): 06016045

[16] NadukuruS S, MichalowskiR L. Three-dimensional displacement analysis of slopes subjected to seismic loads [J]. Canadian Geotechnical Journal, 2013, 506650-661

[17] PanQ-j, XuJ-s, DiasD. Three-dimensional stability of a slope subjected to seepage forces [J]. International Journal of Geomechanics, 2017, 17(8): 04017035

[18] HeY, HazarikaH, YasufukuN, HanZ, LiY-ge. Three-dimensional limit analysis of seismic displacement of slope reinforced with piles [J]. Soil Dynamics and Earthquake Engineering, 2015, 77: 446-452

[19] SunC-w, ChaiJ-r, LuoT, XuZ-g, MaB. Stability charts for pseudostatic stability analysis of rock slopes using the nonlinear Hoek-Brown strength reduction technique [J]. Advances in Civil Engineering, 2020, 31-16

[20] SUN Chao-wei, CHAI Jun-rui, MA Bin, LUO Tao, GAO Ying, QIU Huan-feng. Stability charts for pseudostatic stability analysis of 3D homogeneous soil slopes using strength reduction finite element method [J]. Advances in Civil Engineering, 2019: 6025698. DOI: https://doi.org/10.1155/2019/6025698.

[21] GazetasG, GariniE, AnastasopoulosI, GeorgarakosT. Effects of near-fault ground shaking on sliding systems [J]. Journal of Geotechnical and Geoenvironmental Engineering, 2009, 135(12): 1906-1921

[22] KennedyJ V, AustinJ, PackR, CassB. C-NNAP—A parallel processing architecture for binary neural networks [J]. Proceedings of ICNN’95-International Conference on Neural Networks, 1995, 2: 1037-1041

[23] ChenG-h, ZouJ-f, PanQ-j, QianZ-h, ShiH-Y. Earthquake-induced slope displacements in heterogeneous soils with tensile strength cut-off [J]. Computers and Geotechnics, 2020, 124: 103637

[24] SunC-w, ChaiJ-r, XuZ-g, QinY, ChenX-zhou. Stability charts for rock mass slopes based on the Hoek-Brown strength reduction technique [J]. Engineering Geology, 2016, 21494-106

[25] SunC-w, ChaiJ-r, XuZ-g, QinY. 3D stability charts for convex and concave slopes in plan view with homogeneous soil based on the strength-reduction method [J]. International Journal of Geomechanics, 2017, 17(5): 06016034

[26] WangY-x, ChaiJ-r, CaoJ, QinY, XuZ-g, ZhangX-wei. Effects of seepage on a three-layered slope and its stability analysis under rainfall conditions [J]. Natural Hazards, 2020, 10231269-1278

[27] DONALD I B, GIAM P. The ACADS slope stability programs review [C]// 6th International Symposium on Landslides, 1992, 3: 1665–1670.