Microstructure and Gd-rich phase evolution of as-cast AZ31-xGd magnesium alloys during semi-solid isothermal heat treatment

Abstract

The microstructure and Gd-rich phase evolution of as-cast AZ31-xGd (x=0, 1.5 wt.%, 2.0 wt.% and 2.5 wt.%) magnesium alloys during semi-solid isothermal heat treatment were investigated deeply in the present work. Results showed that the lamellar (Mg,Al)₃Gd phases transformed into the particle-like Al₂Gd phases in AZ31 magnesium alloys with Gd addition during semi-solid isothermal heat treatment, leading to yielding more spherical α-Mg grains. When Gd content is 2.0 wt. %, the size of semi-solid spherical grains reaches the minimum. The main mechanism of grain refinement lies in the remelting of dendritic branches as well as the auxiliary effect of a small number of Al₂Gd particles as grain refining inoculants. Meanwhile, Al₂Gd particles enriched at the solid-liquid interfaces can remarkably retard the growth rate of α-Mg grains. A reduction of deformation resistance has been successfully achieved in AZ31-2.0Gd magnesium alloy after semi-solid isothermal heat treatment, which shows a moderate compressive deformation resistance (230 MPa), comparing to the as-cast AZ31 magnesium alloy (280 MPa) and semi-solid AZ31 magnesium alloy (209 MPa).

Keywords

magnesium / microstructure / rare earth element / Al₂Gd particle / semi-solid isothermal heat treatment

References

[1] ChenG, ZhangY-b, XiaW-j, ChenD. Microstructure and tensile creep resistance of Mg-5.5%Zn-(0.7%, 1.5%, 3.5%, 7.5%)Y alloys [J]. Journal of Central South University, 2015, 22: 4112-4122

[2] WuF, ZhangS, TaoZ. Corrosion behavior of 3C magnesium alloys in simulated sweat solution [J]. Materials and Corrosion, 2011, 62(3): 234-239

[3] LiuH, HuangH, SunJ-p, WangC, BaiJ, MaA-b, ChenX-hua. Microstructure and mechanical properties of Mg-RE-TM cast alloys containing long period stacking ordered phases: A review [J]. Acta Metallurgica Sinica (English Letters), 2019, 32: 269-285

[4] GarcesG, PerezP, BareaR, MedinaJ, StarkA, SchellN, AdevaP. Increase in the mechanical strength of Mg-8Gd-3Y-1Zn alloy containing long-period stacking ordered phases using equal channel angular pressing processing [J]. Metals, 2019, 9: 221

[5] ZhangJ-h, LiuS-j, WuR-z, HouL-g, ZhangM-lin. Recent developments in high-strength Mg-RE-based alloys: Focusing on Mg-Gd and Mg-Y systems [J]. Journal of Magnesium and Alloys, 2018, 6277-291

[6] LiuH, HuangH, WangC, SunJ-p, BaiJ, XueF, MaA-b, ChenX-bo. Recent advances in LPSO-containing wrought magnesium alloys: Relationships between processing, microstructure, and mechanical properties [J]. JOM, 2019, 71: 3314-3327

[7] ChenT, XieZ-w, LuoZ-z, YangQ, TanS, WangY-j, LuoY-min. Microstructure evolution and tensile mechanical properties of thixoformed AZ61 magnesium alloy prepared by squeeze casting [J]. Transactions of Nonferrous Metals Society of China, 2014, 24: 3421-3428

[8] JiangJ-f, LinX, WangY, QuJ-j, LuoS-jing. Microstructural evolution of AZ61 magnesium alloy predeformed by ECAE during semisolid isothermal treatment [J]. Transactions of Nonferrous Metals Society of China, 2012, 22: 555-563

[9] YangZ, XuH-y, WangY, HuM-l, JiZ-S. Investigation of the microstructure and mechanical properties of AZ31/graphene composite fabricated by semi-solid isothermal treatment and hot extrusion [J]. JOM, 2019, 71: 4162-4170

[10] YanH, ZhouB-F. Thixotropic deformation behavior of semi-solid AZ61 magnesium alloy during compression process [J]. Materials Science and Engineering B, 2006, 132: 179-182

[11] WangC-l, ChenA-T, ZhangL, LiuW-c, WuG-h, DingW-jiang. Preparation of an Mg-Gd-Zn alloy semisolid slurry by low frequency electro-magnetic stirring [J]. Materials and Design, 2015, 84: 53-63

[12] WangH-Y, ZhaM, LiuB, WangD-M, JiangQ-Chuan. Microstructural evolution behavior of Mg-5Si-1Al alloy modified with Sr-Sb during isothermal heat treatment [J]. Journal of Alloys and Compounds, 2009, 480: 25-28

[13] XiaoG-f, JiangJ-f, LiuY-z, WangY, GuoB-Y. Recrystallization and microstructure evolution of hot extruded 7075 aluminum alloy during semi-solid isothermal treatment [J]. Materials Characterization, 2019, 156: 109874

[14] SuG-h, CaoZ-y, LiuY-b, WangY-h, ZhangL, ChengL-ren. Effects of semi-solid isothermal process parameters on microstructure of Mg-Gd alloy [J]. Transactions of Nonferrous Metals Society of China, 2010, 20402-406

[15] HuY, RaoL, NiX-wu. Effect of isothermal heat treatment on semi-solid microstructure of AZ91D magnesium alloy containing rare earth Gd [J]. China Foundry, 2015, 12(1): 20-25

[16] XieZ-d, GuanY-j, YuX-h, ZhuL-h, LinJ. Effects of ultrasonic vibration on performance and microstructure of AZ31 magnesium alloy under tensile deformation [J]. Journal of Central South University, 2018, 25: 1545-1559

[17] PourbahariB, MirzadehH, EmamyM, RouminaR. Enhanced ductility of a fine-grained Mg-Gd-Al-Zn magnesium alloy by hot extrusion [J]. Advanced Engineering Materials, 2018, 20: 1701171

[18] GuoQ-y, LiuZ, MaoP-l, SunJ. Effect of aging temperature on microstructure and mechanical properties of AZ81-4%Gd magnesium alloy. [J]. Materials Science Forum, 2013, 747–748301-306

[19] WangX-d, DuW-b, LiuK, WangZ-h, LiS-bo. Microstructure, tensile properties and creep behaviors of as-cast Mg-2Al-1Zn-xGd (x=1, 2, 3 and 4wt.%) alloys [J]. Journal of Alloys and Compounds, 2012, 522: 78-84

[20] ArrabalR, MatykinaE, PardoA, MerinoM C, paucarK, MohedanoM, CasajúsP. Corrosion behaviour of AZ91D and AM50 magnesium alloys with Nd and Gd additions in humid environments [J]. Corrosion Science, 2012, 55: 351-362

[21] PourbahariB, MirzadehH, EmamyM. Elucidating the effect of intermetallic compounds on the behavior of Mg-Gd-Al-Zn magnesium alloys at elevated temperatures [J]. Journal of Materials Research, 2017, 32(22): 4186-4195

[22] PourbahariB, MirzadehH, EmamyM. The Effects of Grain refinement and rare earth intermetallics on mechanical properties of as-cast and wrought magnesium alloys [J]. Journal of Materials Engineering and Performance, 2018, 27(3): 1327-1333

[23] LuF-m, MaA-b, JiangJ-h, GuoY, YangD-h, SongD, ChenJ-qing. Significantly improved corrosion resistance of heat-treated Mg-Al-Gd alloy containing profuse needle-like precipitates within grains [J]. Corrosion Science, 2015, 94: 171-178

[24] PourbahariB, EmamyM, MirzadehH. Synergistic effect of Al and Gd on enhancement of mechanical properties of magnesium alloys [J]. Progress in Natural Science: Materials International, 2017, 27: 228-235

[25] SongT-y, WangW-c, YangX-y, MaoH-k, XuH. Influence of Gd content on microstructure and mechanical properties of AZ31 alloy [J]. Foundry Technology, 2015, 36(5): 1208-1210(in Chinese)

[26] YangH L, zhangZ L, ohnakaI. Structure evolution and compressive behavior of semi-solid Al-Si hypoeutectic alloy with re-melting heat treatment [J]. Journal of Materials Processing Technology, 2004, 151: 155-164

[27] YangM B, huH J, daiB, TangL W. Compression behaviour of semisolid YL112 die casting aluminium alloy following isothermal heat treatment [J]. International Journal of Cast Metals Research, 2007, 20(4): 198-201

[28] ChinoY, KobataM, IwasakiH, MabuchiM. An investigation of compressive deformation behaviour for AZ91 Mg alloy containing a small volume of liquid [J]. Acta Materialia, 2003, 51: 3309-3318

[29] ChuC-l, HuZ, LiX, YanH, WuX-q, MaiY-lu. Evolution and distribution of Al₂Sm phase in as-extruded AZ61-xSm magnesium alloys during semi-solid isothermal heat-treatment [J]. Transactions of Nonferrous Metals Society of China, 2018, 28: 1311-1320

[30] NishiokaK, MaksimovI L. Reconsideration of the concept of critical nucleus and the Gibbs-Thomson equation [J]. Journal of Crystal Growth, 1996, 163: 1-7

[31] WongJ. Microstructure and phase transformation in a highly non-Ohmic metal oxide varistor ceramic [J]. Journal of Applied Physics, 1975, 46: 1653-1659

[32] ChenT J, haoY, SunJ, LiY D. Effects of Mg and RE additions on the semi-solid microstructure of a zinc alloy ZA27 [J]. Science and Technology of Advanced Materials, 2003, 4: 495-502

[33] GuoE-y, PhillionA B, caiB, ShuaiS-s, KazantsevD, JingT, LeeP D. Dendritic evolution during coarsening of Mg-Zn alloys via 4D synchrotron tomography [J]. Acta Materialia, 2017, 123: 373-382

[34] TaoJ-q, JiX-h, ZhangY-p, SunC-j, DengT-quan. Microstructure evolution of Mg-Gd-Y-Zn-Zr magnesium alloy during partial remelting [J]. Materials Science-Medziagotyra, 2014, 20(4): 436-439

[35] DaiJ-c, EastonM, ZhuS-m, WuG-h, DingW-jiang. Grain refinement of Mg-10Gd alloy by Al additions [J]. Journal of Materials Research, 2012, 27: 2790-2797

[36] LouéW R, sueryM. Microstructural evolution during partial remelting of Al-Si7Mg alloys [J]. Materials Science and Engineering A, 1995, 203: 1-13

[37] NieS, GaoB-y, WangX-j, CaoZ-q, GuoE-y, WangT-min. The influence of holding time on the microstructure evolution of Mg-10Zn-6.8Gd-4Y alloy during semi-solid isothermal heat treatment [J]. Metals, 2019, 9: 420

[38] ZhangL, CaoZ-y, LiuY-bing. Microstructure evolution of semi-solid Mg-14Al-0.5Mn alloys during isothermal heat treatment [J]. Transactions of Nonferrous Metals Society of China, 2010, 201244-1248

[39] HeymeH N, shevchenkoN, LeiZ, EckertK, KeplingerO, GrenzerJ, BeckermannC, EckertS. Coarsening evolution of dendritic sidearms: From synchrotron experiments to quantitative modeling [J]. Acta Materialia, 2018, 146: 176-186