Separation of silicon and iron in copper slag by carbothermic reduction-alkaline leaching process

Abstract

Approximately 2.0–3.0 t of copper slag (CS) containing 35%–45% iron is generated for every ton of copper produced during the pyrometallurgical process from copper concentrate. Therefore, the recovery of iron from CS utilizes a valuable metal and alleviates the environmental stress caused by stockpile. In this paper, a new method has been developed to realize the enrichment of iron in CS through the selective removal of silica. The thermodynamic analyses and experimental results show that the iron in CS can be fully reduced into metallic iron by carbothermic reduction at 1473 K for 60 min. The silica was converted into free quartz solid solution (QSS) and cristobalite solid solution (CSS). QSS and CSS are readily soluble, whereas metallic iron is insoluble, in NaOH solution. Under optimal leaching conditions, a residue containing 87.32% iron is obtained by decreasing the silica content to 6.02% in the reduction roasted product. The zinc content in the residue is less than 0.05%. This study lays the foundation for the development of a new method to comprehensively extract silicon and iron in CS while avoiding the generation of secondary tailing.

Keywords

copper slag / quartz solid solution / cristobalite solid solution / carbothermic reduction / alkaline leaching

References

[1] FengY, YangQ-X, ChenQ-S, KeroJ, AnderssonA, AhmedH, EngströmF, SamuelssonC. Characterization and evaluation of the pozzolanic activity of granulated copper slag modified with CaO [J]. Journal of Cleaner Production, 2019, 232: 1112-1120

[2] HollandK, EriçR H, TaskinenP, JokilaaksoA. Upgrading copper slag cleaning tailings for re-use [J]. Minerals Engineering, 2019, 133: 35-42

[3] ChunT, MuG, DiZ, LongH, NingC, LiD. Recovery of iron from copper slag by carbothermic reduction and magnetic separation in the presence of CaO [J]. Archives of Metallurgy and Materials, 2018, 63(1): 299-305

[4] ShenH-T, ForssbergE. An overview of recovery of metals from slags [J]. Waste Management, 2003, 23(10): 933-949

[5] AlpI, DeveciH, SüngünH. Utilization of flotation wastes of copper slag as raw material in cement production [J]. Journal of Hazardous Materials, 2008, 159: 390-395

[6] GoraiB, JanaR K. Characteristics and utilisation of copper slag—A review [J]. Resources, Conservation and Recycling, 2003, 39: 299-313

[7] KimB S, JoS K, ShinD Y, LeeJ C, JeongS B. A physico-chemical separation process for upgrading iron from waste copper slag [J]. International Journal of Mineral Processing, 2013, 124: 124-127

[8] TsunazawaY, LiuC-Z, ToiR, OkuraT, TokoroC. Crystal formation and growth by slow cooling for recovery of magnetite particles from copper smelting slag [J]. Mineral Processing and Extractive Metallurgy, 2019, 128(4): 248-255

[9] GuoZ-Q, ZhuD-Q, PanJ, WuT-J, ZhangF. Improving beneficiation of copper and iron from copper slag by modifying the molten copper slag [J]. Metals, 2016, 6(4): 86

[10] NadirovR, SyzdykovaL, ZhussupovaA. Copper smelter slag treatment by ammonia solution: Leaching process optimization [J]. Journal of Central South University, 2017, 2412799-2804

[11] HeoJ H, KimB S, ParkJ H. Effect of CaO addition on iron recovery from copper smelting slags by solid carbon [J]. Metallurgical and Materials Transactions B, 2013, 44(6): 1352-1363

[12] LiS-W, PanJ, ZhuD-Q, GuoZ-Q, XuJ-W, ChouJ-L. A novel process to upgrade the copper slag by direct reduction-magnetic separation with the addition of Na₂CO₃ and CaO [J]. Powder Technology, 2019, 347: 159-169

[13] HeoJ H, ChungY S, ParkJ H. Recovery of iron and removal of hazardous elements from waste copper slag via a novel aluminothermic smelting reduction (ASR) process [J]. Journal of Cleaner Production, 2016, 137: 777-787

[14] LiX-B, WangH-Y, ZhouQ-S, QiT-G, LiuG-H, PengZ-H. Efficient separation of silica and alumina in simulated CFB slag by reduction roasting-alkaline leaching process [J]. Waste Management, 2019, 87: 798-804

[15] ShenL-T, LiX-B, ZhouQ-S, PengZ-H, LiuG-H, QiT-G, TaskinenP. Sustainable and efficient leaching of tungsten in ammoniacal ammonium carbonate solution from the sulfuric acid converted product of scheelite [J]. Journal of Cleaner Production, 2018, 197: 690-698

[16] RomchatC F, KatsuyaM, TakahiroM, TetsuyaN. The selective alkaline leaching of zinc oxide from electric arc furnace dust pre-treated with calcium oxide [J]. Hydrometallurgy, 2016, 159: 120-125

[17] ChenJ H, MiW J, ChenH Y, LiB, ChouK C, HouX M. Iron oxide recovery from fayalite in water vapor at high temperature [J]. Journal of Mining and Metallurgy, Section B: Metallurgy, 2018, 54(1): 1-8

[18] GyurovS, MarinkovN, KostovaY, RabadjievaD, KovachevaD, TzvetkovaC, GentschevaG, PenkovI. Technological scheme for copper slag processing [J]. International Journal of Mineral Processing, 2017, 158: 1-7

[19] JiaoK X, ZhangJ L, LiuZ J, ChenC L, LiuF. Circulation and accumulation of harmful elements in blast furnace and their impact on the fuel consumption [J]. Ironmaking & Steelmaking, 2017, 44(5): 344-350

[20] ZhangQ-C, QiuG-Z, XiaoQ. The effect of coal-kind on coal-based direct reduction of low grade iron ore [J]. Journal of Central South University of Technology, 1997, 28(2): 126-129(in Chinese)

[21] LiX-B, WangH-Y, ZhouQ-S, QiT-G, LiuG-H, PengZ-H, WangY-L. Reaction behavior of kaolinite with ferric oxide during reduction roasting [J]. Transactions of Nonferrous Metals Society of China, 2019, 29(1): 186-193

[22] HAN Bin, TONG Xiong, ZHANG Guo-hao, XIE Xian, LV Hao-zi. Process mineralogy study on a copper slag [J]. Conservation and Utilization of Mineral Resources, 2015(1): 63–68. (in Chinese)

[23] BariIThermochemical data of pure substances [M], 1995, Germany, VCH Verlagsgesellschaft mbH

[24] LuoJ, LiG-H, JiangT, PengZ-W, RaoM-J, ZhangY-B. Conversion of coal gangue into alumina, tobermorite and TiO₂-rich material [J]. Journal of Central South University, 2016, 23: 1883-1889

[25] CrokerD, LoanM, HodnettB. Desilication reactions at digestion conditions: an in situ X-ray diffraction study [J]. Crystal Growth & Design, 2008, 8(12): 4499-4505

[26] MihailovaI, MehandjievD. Characterization of fayalite from copper slags [J]. Journal of the University of Chemical Technology and Metallurgy, 2010, 45(3): 317-326

[27] MingC Q, GreishY, El-GhannamA. Crystallization behavior of silica-calcium phosphate biocomposites: XRD and FTIR studies [J]. Journal of Materials Science: Materials in Medicine, 2004, 15(11): 1227-1235

[28] ReigF B, AdelantadoJ V G, MorenoM C M M. FTIR quantitative analysis of calcium carbonate (calcite) and silica (quartz) mixtures using the constant ratio method. Application to geological samples [J]. Talanta, 2002, 58(4): 811-821

[29] MarinkovN, Markova-VelichkovaM, GyurovS, KostovaY, SpassovaI, RabadjievaD, KovachevaD, PenkovI, TzvetkovaC, GentschevaG. Preparation and characterization of silicagel from silicate solution obtained by autoclave treatment of copper slag [J]. Journal of Sol-Gel Science and Technology, 2018, 87(2): 331-339

[30] YaoC, FangL, GuoY-X, LiuD-D, ChengF-Q. Modulus control of pre-desilication solution by alumina-extracted residues of coal fly ash [J]. Journal of North University of China (Natural Science Edition), 2018, 39(3): 328-333(in Chinese)