Creep behavior and mechanical properties of Al-Li-S4 alloy at different aging temperatures

Abstract

Creep age forming techniques have been widely used in aerospace industries. In this study, we investigated the effect of aging temperature (143 °C–163 °C) on the creep behavior of Al-Li-S4 aluminum alloy and their mechanical properties at room temperature. The mechanical properties were tested by tensile testing, and the microstructural evolution at different aging temperatures was examined by transmission electron microscopy. Results show that the creep strains and the room-temperature mechanical properties after creep aging increase with the aging temperature. As the aging temperature increases, the creep strain increases from 0.018% at 143 °C to 0.058% at 153 °C, and then to 0.094% at 163 °C. Within 25 h aging, the number of creep steps increases and the duration time of the same steps is shortened with the growth of aging temperatures. Therefore, the increase in aging temperatures accelerates the progress of the entire creep. Two main strengthening precipitates θ′ (Al₂Cu) and T₁ (Al₂CuLi) phases were characterized. This work indicates that the creep strain and mechanical properties of Al-Li-S4 alloys can be improved by controlling aging temperatures.

Keywords

Al-Li-S4 alloy / creep behavior / mechanical properties / aging temperature

References

[1] ZhengZ-q, LiJ-f, ChenZ-g, LiH-y, LiS-c, TanC-y. Alloying and microstructural evolution of Al-Li alloys. The Chinese Journal of Nonferrous Metals, 2011, 21(10): 2237-2351 in Chinese)

[2] YoshimuraR J, KonnaT, AbeE J, HiragaK J. Transmission electron microscopy study of the evolution of precipitates in aged Al-Li-Cu alloys: the θ’ and T₁ phases. Acta Materialia, 2003, 51: 4251-4266

[3] DengY-j, HuangG-j, CaoL-f, WuX-d, HuangL. Effect of ageing temperature on precipitation of Al-Cu-Li-Mn-Zr alloy. Journal of Central South University, 2018, 25: 1340-1349

[4] NobleB, ThompsonG E. Precipitation characteristics of aluminium-lithium alloys. Metal Science, 1971, 5(1): 114-120

[5] WilliamsD B, EdingtonJ W. The precipitation of δ′ (Al₃Li) in dilute aluminium-lithium alloys. Metal Science, 1975, 9(1): 529-532

[6] LiX-c, ZhanL-h. Unified constitutive modeling of creep aging behavior of AA2219 based on interaction of creep and aging interactive mechanism. Journal of Central South University, 2017, 48(11): 2942-2948

[7] StarkeJ E A, StaleyJ T. Application of modern aluminum alloys to aircraft. Woodhead Publishing Series in Metals and Surface Engineering, 1966, 32(2): 131-1723

[8] ZhanL-h, LinJ-g, DeanT A. A review of the development of creep age forming: Experimentation, modelling and applications. International Journal of Machine Tools and Manufacture, 2011, 51(1): 1-7

[9] ZengG, LiuC-m, WangY-c, GaoY-h, JingS-n, ChenZ-y. Effects of aging temperature on microstructure, tensile and creep properties of ring rolled AZ80-Ag alloy. Materials Science and Engineering A, 2018, 734: 59-66

[10] ZhangL, HeH, LiS-k, WuX-d, LiL-x. Dynamic compression behavior of 6005 aluminum alloy aged at elevated temperatures. Vacuum, 2018, 155: 604-611

[11] HuL-b, ZhanL-h, ShenR-l, LiuZ-l, MaZ-y, LiuJ, YangY-g. Effects of uniaxial creep ageing on the mechanical properties and microprecipitates of Al-Li-S4 alloy. Materials Science and Engineering A, 2017, 668: 272-279

[12] LiH Y, KangW, LuX C. Effect of age-forming on microstructure, mechanical and corrosion properties of a novel Al-Li alloy. Journal of Alloys and Compounds, 2015, 640: 210-218

[13] ZhangJ, WangC, ZhangY, DengY-l. Effects of creep aging upon Al-Cu-Li alloy: Strength, toughness and microstructure. Journal of Alloys and Compounds, 2018, 764: 452-459

[14] LiY, ShiZ, LinJ, YangY L, HaungB M, ChungT F, YnagJ R. Experimental investigation of tension and compression creep-ageing behavior of AA2050 with different initial tempers. Materials Science and Engineering A, 2016, 657: 299-308

[15] HuL-b, ZhanL-h, LiuZ-l, ShenR-l, YangY-l, MaZ-y, LiuM, LiuJ, YangY-g, WangX. The effects of pre-deformation on the creep aging behavior and mechanical properties of Al-Li-S4 alloys. Materials Science and Engineering A, 2017, 703: 496-502

[16] DeschampsA, DecreusB, De GeuserF, DorinT, WeylandM. The influence of precipitation on plastic deformation of Al-Cu-Li alloys. Acta Materialia, 2013, 61: 4010-4021

[17] CassadaW A, ShifletG J, StarkeJ E A. Electron diffraction studies of Al₂CuLi [T₁] plates in an Al-2.4Li-2.4Cu-0.18Zr alloy. Scripta Metallurgice, 1987, 21: 387-392

[18] ZhangS-f, ZengW-d, YangW-h, ShiC-l, WangH-j. Ageing response of a Al-Cu-Li 2198 alloy. Materials and Design, 2014, 63: 368-374

[19] DeschampsA, GarciaM, ChevyJ, DavoB, De GeuserF. Influence of Mg and Li content on the microstructure evolution of Al-Cu-Li alloys during long-term ageing. Acta Materialia, 2017, 122: 32-46

[20] HirosawaS, SatoT, KamioA. Effects of Mg addition on the kinetics of low-temperature precipitation in Al-Li-Cu-Ag-Zr alloys. Materials Science and Engineering A, 1998, 242: 195-201

[21] GableB M, ZhuaW, CsontosA, StarkeE AJr.. The role of plastic deformation on the competitive microstructural evolution and mechanical properties of a novel Al-Li-Cu-X alloy. Journal of Light Metals, 2001, 1: 1-14

[22] MaP-p, ZhanL-h, LiuC-h, WangQ, LiH, LiuD-b, HuZ-g. Pre-strain -dependent natural ageing and its effect on subsequent artificial ageing of an Al-Cu-Li alloy. Materials Science and Engineering A, 2019, 790: 8-19