3D surface profile diagnosis using digital image processing for laboratory use

Abstract

The measurement of the surface quality and the profile preciseness is major issues in many industrial branches such that the surface quality of semi products directly affects the subsequent production steps. Although, there are many ways to obtain required data, the hardware necessary for the measurements such as 2D or 3D scanners, depending on the problem’s complexity, is too expensive. Therefore, in this paper, what we put forward as a novelty is an algorithm which is verified on the model of simple 3D scanner on the image processing basis with the resolution of 0.1 mm. There are many ways to scan surface profile; however, the image processing currently is the most trending topic in industry automation. Most importantly, in order to obtain surface images, standard high resolution reflex camera is used and thus the post processing could be realized with MatLab as the software environment. Therefore, this solution is an alternative to the expensive scanners, and single-purpose devices could be extended by many additional functions.

References

[1] PoloM E, Felic½simoÁ M M. Analysis of uncertainty and repeatability of a low-cost 3D laser scanner [J]. Sensors, 2012, 12(7): 9046-9054

[2] StančićI, MusićJ, ZanchiV. Improved structured light 3D scanner with application to anthropometric parameter estimation [J]. Measurement, 2013, 46(1): 716-726

[3] LiG W, TangJ Y, ZhouW, LiL. Fatigue life prediction of workpiece with 3D rough surface topography based on surface reconstruction technology [J]. Journal of Central South University, 2018, 25(9): 2069-2075

[4] MatulovaP, StemberkovaR, ZdralekP, MaresovaP, KucaK. Regional development of small and medium enterprise in correlation of the life cycle [C]//. Proceedings of the 28th International Business Information Management Association Conference-Vision. Innovation Management, Development Sustainability, and Competitive Economic Growth, 201612531261

[5] MatulovñP, ŠtemberkovñR, ZdralekP, MarešovñP, KučaK. Utilization rate of open innovation in correlation of the SME life cycle [C]//. IDIMT 2016-Information Technology, Society and Economy Strategic Cross-Influences-24th Interdisciplinary Information Management Talks, 2016251258

[6] KrejcarO, FrischerR. Real time voltage and current phase shift analyzer for power saving applications [J]. Sensors (Switzerland), 2012, 12(8): 11391-11405

[7] CzekajP, KrejcarO. Real-time control systems secured communication [C]//. 9th IFAC Workshop on Programmable Devices and Embedded Systems, 20092326

[8] BiZ M, WangL. Advances in 3D data acquisition and processing for industrial applications [J]. Robotics and Computer-Integrated Manufacturing, 2010, 26(5): 403-413

[9] Meas Sci Technol, 2009, 21(1

[10] ChangK T, ChangJ R, LiuJ K. Detection of pavement distresses using 3D laser scanning technology [C]//. Computing in Civil Engineering, 2005, 2005: 1-11

[11] KrejcarO, FrischerR, DavidJ. Surface diagnostics of narrow plate moulds [J]. Metalurgija, 2015, 544): 653-656

[12] WangL S, LeeD L, NieM Y, ZhengZ W. A study of the precision factors of large-scale object surface profile laser scanning measurement [J]. Journal of Materials Processing Technology, 2002, 129: 584-587

[13] GengJ. Structured-light 3D surface imaging: A tutorial [J]. Adv Opt Photon, 2011, 3(2): 128-160

[14] SchirripaS, PagnoloG, CozzellaL, LecceseF. Viability of an optoelectronic system for real time roughness measurement [J]. Measurement, 2014, 58: 537-543

[15] DemirciogluP. Estimation of surface topography for dental implants using advanced metrological technology and digital image processing techniques [J]. Measurement, 2014, 48: 43-53

[16] GaoY, LiX, DongM, LiH P. An enhanced artificial bee colony optimizer and its application to multi-level threshold image segmentation [J]. Journal of Central South University, 2018, 25(1): 107-120

[17] ChenB Q, CuiJ G, XuQ, ShuT, LiuH L. Coupling denoising algorithm based on discrete wavelet transform and modified median filter for medical image [J]. Journal of Central South University, 2019, 26(1): 120-131

[18] KimM K, ChengJ C P, SohnH, ChangC C. A framework for dimensional and surface quality assessment of precast concrete elements using BIM and 3D laser scanning [J]. Automation in Construction, 2015, 49: 225-238

[19] QianD S, PengY Y, DengJ D. Hot deformation behavior and constitutive modeling of Q345E alloy steel under hot compression [J]. Journal of Central South University, 2017, 24(2): 284-295

[20] ZhouW, TangJ Y, HeY F, ZhuC C. Modeling of rough surfaces with given roughness parameters [J]. Journal of Central South University, 2017, 24(1): 127-136

[21] AlparO, KrejcarO. Virtual road condition prediction through license plates in 3D simulation [C]//. Computational Collective Intelligence, 8th International Conference, ICCCI, 2016, 2016: 269-78

[22] WangM, XiL, DuS. 3D surface form error evaluation using high definition metrology [J]. Precision Engineering, 2014, 38: 230-236

[23] HuangS S, SunZ Q, ZhouT, ZhouJ M. Application of time-frequency entropy from wake oscillation to gas-liquid flow pattern identification [J]. Journal of Central South University, 2018, 25(7): 1690-1700

[24] ZengM, LiJ H, MengQ H, ZhangX N. Temporal-spatial cross-correlation analysis of non-stationary near-surface wind speed time series [J]. Journal of Central South University, 2017, 24(3): 692-698

[25] MajidS, MohammadJ. Optimal selection of annulus radius ratio to enhance heat transfer with minimum entropy generation in developing laminar forced convection of water-Al2O3 nanofluid flow [J]. Journal of Central South University, 2017, 24(8): 1850-1865

[26] TanakaM, KayamaA. Automated image processing for fractal analysis of fracture surface profiles in high-temperature materials [J]. Journal of Materials Science Letters, 2001, 20: 907-909

[27] KucherikA, GerkeM, FatkullinE, ProkoshevV, AralkelianS. The use of scanning probe microscopy for diagnostics of laser-induced surface instabilities [J]. Laser Physics, 2005, 15(7): 1071-1074

[28] DavidJ, Janč½koyñZ, FrischerR, VrożinaM. Crystallizer’s desks surface diagnostics with usage of robotic system [J]. Archives of Metallurgy and Materials, 2013, 58(3): 907-910

[29] Bñsaca-PreciadoL C, SergiyenkoO, Rodr½guez-QuinonezJ C, Garc½aX, TyrsaV V, Ivas-LopezM, Hernandez-BalbuenaD, MercorelliP, PodrygaloM, GurkoA, TabakovaI, StarostenkoO. Optical 3D laser measurement system for navigation of autonomous mobile robot [J]. Opticsand Lasers in Engineering, 2014, 54: 159-169

[30] ChenH, MaS, NuechterA. Non-synchronous point cloud algorithm for 3D reconstruction based on laser scanning and SFM [J]. Chinese Journal of Scientific Instrument, 2016, 37(5): 1148-1157

[31] Garcia-CruzX M, SergiyenkoO Y, TyrsaV V, Rivas-LopezM, Hernandez-BalbuenaD, Rodriguez-QuiáonezJ C, Basaca-PreciadoL C, MercorelliP. Optimization of 3D laser scanning speed by use of combined variable step [J]. Optics and Lasers in Engineering, 2014, 54: 141-151

[32] LindskogE, VallhagenJ, JohanssonB. Production system redesign using realistic visualisation [J]. International Journal of Production Research, 2017, 55(3): 858-869

[33] XiaC, ShiY, YinW. Obtaining and denoising method of three-dimensional point cloud data of plants based on TOF depth sensor [J]. Transactions of the Chinese Society of Agricultural Engineering, 2018, 34(6): 168-174

[34] HuberA, SchweerB, PhilippsV, GierseN, ZlobinskiM, BrezinsekS, BielW, KotovV L-, GonzalesR M, SammU. Development of laser-based diagnostics for surface characterisation of wall components in fusion devices [J]. Fusion Engineering and Design, 201113361340

[35] PODYMOVA N B, KARABUTOV A A, CHEREPETSKAYA E B. Laser optoacoustic method for quantitative nondestructive evaluation of the subsurface damage depth in ground silicon wafers [J]. Laser Physics, 2014, 24: No. 086003.

[36] van der MEIDEN H J, van den BERG M A, BRONS S, DING H, van ECK H J N, HOEN M H J ’T, KARHUNEN J, de KRUIF T M, LAAN M, LI C, LISSOVSKI A, MORGAN T W, PARIS P, PIIP K, van de POL M J, SCANNELL R, SCHOLTEN J, SMEETS P H M, SPORK C, van EMMICHOVEN P A Z, ZOOMERS R, de TEMMERMAN G. Laser-based diagnostics applications for plasma-surface interaction studies [J]. Journal of Instrumentation, 2013, 8: 11.

[37] Applied Sciences, 2016, 6(10

[38] ChenZ G, LiY G, ChenX F, YangC H, GuiW H. Edge and texture detection of metal image under high temperature and dynamic solidification condition [J]. Journal of Central South University, 2018, 256): 1501-1512

[39] VeselkaL, DvorakJ, KrejcarO. Smart automatic control of GSM alarm [C]//. Mobile Web and Intelligent Information Systems, 13th International Conference, MOBIWIS, 2016, 2016: 363-375

[40] KlimovaB, MaresovaP, KrejcarO. Smart home technology and energy savings with a special focus on Europe [C]//. Advanced Multimedia and Ubiquitous Engineering, MUE/FutureTech, 2017, 2017: 481-486

[41] DengY, ChenZ, YaoX, HassanS, WuJ. Task scheduling for smart city applications based on multi-server mobile edge computing [J]. IEEE Access, 2019, 7: 14410-14421

[42] Sensors, 2018, 18(2

[43] KrejcarO, FrischerR. Smart intelligent control of current source for high power LED diodes [J]. Microelectronics Journal, 2013, 444): 307-314

[44] SpickaI, KrejcarO, FrischerR, KostialP, SelamatA, JancikovaZ, KucaK. Utilization of linearization methods for measuring of thermal properties of materials [J]. AIMS Biophysics, 2018, 5(4): 257-271

[45] KREJCAR O, KONARIK P. Remote wireless low cost RT process control using windows PLC by MATLAB/Simulink throw the REX control system [C]// 5th IEEE GCC Conference and Exhibition, GCC 2009. Kuwait City, 2009: NO. 5734255.

[46] SukalaO, MaresovaP, DvorakJ, SelamatA, KrejcarO. Calculating the optimal price of products in an online store [C]//. Mobile Web and Intelligent Information Systems-14th International Conference, MobiWIS, 2017, 2017: 104-114

[47] MesicekJ, ZdarskyJ, DolezalR, KrejcarO, KucaK. Simulations of light propagation and thermal response in biological tissues accelerated by graphics processing unit [C]//. Computational Collective Intelligence, 8th International Conference, ICCCI, 2016, 2016: 242-251

[48] TervenJ R, Cãrdova-EsparzaD M. Kin2. A Kinect 2 toolbox for MATLAB [J]. Science of Computer Programming, 2016, 130: 97-106

[49] SzilñgyiB, NagyZ K. Graphical processing unit (GPU) acceleration for numerical solution of population balance models using high resolution finite volume algorithm [J]. Computers and Chemical Engineering, 2016, 91: 167-181

[50] Castano-DiezD, MoserD, SchoeneggerA, PruggnallerS, FrangakisA S. Performance evaluation of image processing algorithms on the GPU [J]. Journal of Structural Biology, 2008, 164(1): 153-160

[51] FrancoJ, BernabeG, FernandezJ, UjaldonM. The 2D wavelet transform on emerging architectures: GPUs and multicores [J]. Journal of Real-Time Image Processing, 2012, 7(3): 145-152