Microstructure and tensile property of SLM 316L stainless steel manufactured with fine and coarse powder mixtures

Abstract

Selective laser melting (SLM) technology is the prevailing method of manufacturing components with complex geometries. However, the cost of the additive manufacturing (AM) fine powder is relatively high, which significantly limits the development of the SLM. In this study, the 316L fine powder and coarse powder with a mass ratio of 80:20, 70:30 and 60:40 were mixed using a ball milling and the samples with a relative density greater than 97% were prepared by SLM. The results show that the intricate temperature gradients and surface tension gradients in SLM will produce Marangoni flow, forming a typical molten pool morphology, cellular and strip subgrain structures. And as the proportion of coarse powder increases, the scanning track morphology changes from smooth to undulating; the morphology of the molten pool and subgrain structure are weakened. Meanwhile, the unmelted particles appear on the surface of the SLM sample. On the premise of an introducing appropriate amount of large particle size powder (20%), the SLM samples still have good mechanical properties (662 MPa, 47%).

Keywords

selective laser melting / powder mixture / microstructure / solidification / mechanical properties

References

[1] JafariD, WitsW W. The utilization of selective laser melting technology on heat transfer devices for thermal energy conversion applications: A review [J]. Renewable and Sustainable Energy Reviews, 2018, 91: 420-442

[2] BobbioL D, OtisR A, BorgoniaJ P, DillonR P, BeeseA M. Additive manufacturing of a functionally graded material from Ti-6Al-4V to Invar: Experimental characterization and thermodynamic calculations [J]. Acta Materialia, 2017, 127: 133-142

[3] LiL, PostB, KuncV, ElliottA M, ParanthamanM P. Additive manufacturing of near-net-shape bonded magnets: Prospects and challenges [J]. Scripta Materialia, 2017, 135: 100-104

[4] WuC-f, WangX-h, ZhangH-l, WangX-tao. Effect of alloy elements on the mechanical properties and pitting corrosion resistance of 316LN austenitic stainless steel [J]. Chinese Journal of Engineering, 2015, 37(9): 1157-1164

[5] TrelewiczJ R, HaladaG P, DonaldsonO K, ManogharanG. Microstructure and corrosion resistance of laser additively manufactured 316L stainless steel [J]. JOM, 2016, 68(3): 850-859

[6] DargahiM, HosseinidoustZ, TufenkjiN, OmanovicS. Investigating electrochemical removal of bacterial biofilms from stainless steel substrates [J]. Colloids Surf B: Biointerfaces, 2014, 117: 152-157

[7] GuoS, HanE-h, WangH-t, ZhangZ-m, WangJ-qiu. Life prediction for stress corrosion behavior of 316L stainless steel elbow of nuclear power plant [J]. Acta Metallurgica Sinica, 2017, 53(4): 455-464

[8] LodhiM J K, DeenK M, HaiderW. Corrosion behavior of additively manufactured 316L stainless steel in acidic media [J]. Materialia, 2018, 2: 111-121

[9] YuS-s, ZhangP-c, QiuK-h, ZhangW-t, LiJ-f, YaoS, ZhouD-y, YaoN-n, LiJ-chi. Preparation and characterization of 316L spherical powder for different uses by supersonic laminar flow atomization [J]. Ferroelectrics, 2018, 530(1): 25-31

[10] QuinnP, O’halloranS, LawlorJ, RaghavendraR. The effect of metal EOS 316L stainless steel additive manufacturing powder recycling on part characteristics and powder reusability [J]. Advances in Materials and Processing Technologies, 2019, 5(2): 1-12

[11] TangH P, QianM, LiuN, ZhangX Z, YangG Y, WangJ. Effect of powder reuse times on additive manufacturing of Ti-6Al-4V by selective electron beam melting [J]. JOM, 2015, 67(3): 555-563

[12] AttarH, PrashanthK G, ZhangL C, CalinM, OkulovI V, ScudinoS, YangC, EckertJ. Effect of powder particle shape on the properties of in situ Ti-TiB composite materials produced by selective laser melting [J]. Journal of Materials Science & Technology, 2015, 31(10): 1001-1005

[13] GuH, GongH, DilipJ, PalD, HicksA, DoakH, StuckerBEffects of powder variation on the microstructure and tensile strength of Ti6Al4V parts fabricated by selective laser melting [C]//, 201446

[14] WangD, SongC, YangY, BaiY. Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts [J]. Materials & Design, 2016, 100: 291-299

[15] RauschA, KüngV, PobelC, MarklM, KörnerC. Predictive simulation of process windows for powder bed fusion additive manufacturing: Influence of the powder bulk density [J]. Materials, 2017, 10(10): 1117

[16] KörnerC, AttarE, HeinlP. Mesoscopic simulation of selective beam melting processes [J]. Journal of Materials Processing Technology, 2011, 2116978-987

[17] SchiaffinoS, SoninA A. Motion and arrest of a molten contact line on a cold surface: An experimental study [J]. Physics of Fluids, 1997, 9(8): 2217-2226

[18] SchatzM F, VanhookS J, MccormickW, SwiftJ, SwinneyH L. Time-independent square patterns in surface-tension-driven Bénard convection [J]. Physics of Fluids, 1999, 11(9): 2577-2582

[19] MizevA I, SchwabeD. Convective instabilities in liquid layers with free upper surface under the action of an inclined temperature gradient [J]. Physics of Fluids, 2009, 21(11): 112102

[20] UenoI, KurosawaT, KawamuraH. Thermocapillary convection in thin liquid layer with temperature gradient inclined to free surface [J]. Heat Transfer, 2002, 2: 129-134

[21] ShklyaevO E, NepomnyashchyA A. Thermocapillary flows under an inclined temperature gradient [J]. Journal of Fluid Mechanics, 2004, 50499-132

[22] DietrichS. Convective instabilities in complex systems with partly free surface [J]. Journal of Physics: Conference Series, 2007, 64: 012001

[23] SuryawanshiJ, PrashanthK G, RamamurtyU. Mechanical behavior of selective laser melted 316L stainless steel [J]. Materials Science and Engineering A, 2017, 696113-121

[24] ZhongY, LiuL, WikmanS, CuiD, ShenZ. Intergranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting [J]. Journal of Nuclear Materials, 2016, 470: 170-178

[25] CasatiR, LemkeJ, VedaniM. Microstructure and fracture behavior of 316L austenitic stainless steel produced by selective laser melting [J]. Journal of Materials Science & Technology, 2016, 32(8): 738-744

[26] MowerT M, LongM J. Mechanical behavior of additive manufactured, powder-bed laser-fused materials [J]. Materials Science and Engineering A, 2016, 651: 198-213

[27] ZhouX, WangD, LiuX, ZhangD, QuS, JingM, LondonG, ShenZ, WeiL. 3D-imaging of selective laser melting defects in a Co–Cr–Mo alloy by synchrotron radiation micro-CT [J]. Acta Materialia, 2015, 98(2): 1-16

[28] SaeidiK, KvetkováL, LofajF, ShenZ. Austenitic stainless steel strengthened by the in situ formation of oxide nanoinclusions [J]. RSC Advances, 2015, 5(27): 20747-20750

[29] BoegeleinT, DryepondtS N, PandeyA, DawsonK, TatlockG J. Mechanical response and deformation mechanisms of ferritic oxide dispersion strengthened steel structures produced by selective laser melting [J]. Acta Materialia, 2015, 87: 201-215