DCS devices based non-linear process control system design for plants with distributed time-delay using particle filter

Ming-cong Deng , Ryohei Fujii

Journal of Central South University ›› 2020, Vol. 26 ›› Issue (12) : 3351 -3358.

PDF
Journal of Central South University ›› 2020, Vol. 26 ›› Issue (12) : 3351 -3358. DOI: 10.1007/s11771-019-4258-5
Article

DCS devices based non-linear process control system design for plants with distributed time-delay using particle filter

Author information +
History +
PDF

Abstract

Remote control process system with distributed time-delay has attracted much attention in different fields. In this paper, non-linear remote control of a single tank process system with wireless network is considered. To deal with the distributed time-delay in a large-scale plant, the time-delay compensation controller based on DCS devices is designed by using operator theory and particle filter. Distributed control system (DCS) device is developed to monitor and control from the central monitoring room to each process. The particle filter is a probabilistic method to estimate unobservable information from observable information. First, remote control system and experimental equipment are introduced. Second, control system based on an operator theory is designed. Then, process system with distributed time-delay using particle filter is carried out. Finally, the actual experiment is conducted by using the proposed time-delay compensation controller. When estimating with the proposed method, the result is close to the case in which the distributed time-delay does not exist. The effectiveness of the proposed control system is confirmed by experiment results.

Keywords

non-linear remote control / distributed control system / particle filter / operator theory / distributed time-delay

Cite this article

Download citation ▾
Ming-cong Deng, Ryohei Fujii. DCS devices based non-linear process control system design for plants with distributed time-delay using particle filter. Journal of Central South University, 2020, 26(12): 3351-3358 DOI:10.1007/s11771-019-4258-5

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

STEFFEN W. Process control in the chemical industry [D]. Chemical Engineering Department, King Saud University, 2002: 132–145.

[2]

FujiiR, DengM-C, WakitaniS. Nonlinear remote temperature control of a spiral plate heat exchanger [C]. 2015 International Conference on Advanced Mechatronic Systems (ICAMechS), 2015, New York, USA, IEEE: 533537

[3]

DengM-C, InoueA. Networked non-linear control for an aluminum plate thermal process with time-delays [J]. International Journal of Systems Science, 2008, 39(11): 1075-1080

[4]

WangA-H, DengM-C. Operator-based robust nonlinear tracking control for a human multi-joint arm-like manipulator with unknown time-varying delays [J]. Applied Mathematics & Information Sciences, 2012, 6(3): 459-468

[5]

MichielsW, MorărescuC I, NiculescuS I. Consensus problems with distributed delays, with application to traffic flow models [J]. SIAM Journal on Control and Optimization, 2009, 48(1): 77-101

[6]

WenS-J, DengM-C, BiS-H, WangD-Y. Operator-based robust nonlinear control and its realization for a multi-tank process by using a distributed control system [J]. Transactions of the Institute of Measurement and Control, 2012, 34(7): 891-902

[7]

MERWE R V D, DOUCET A, FREITAS N D, WAN E. The unscented particle filter [J]. Advances in Neural Information Processing Systems, 2001(13): 584–590.

[8]

YangT, LaugesenR S, MehtaP G, MeynS P. Multivariable feedback particle filter [J]. Automatica, 2016, 71: 10-23

[9]

ChenZ-Q, WuX, SunM-W, SunQ-L. Performance analysis of active disturbance rejection generalized predictive control on time-delay systems [J]. Journal of Central South University: Science and Technology, 2018, 49(8): 1960-1970(in Chinese)

[10]

DengM, InoueA, IshikawaK. Operator-based nonlinear feedback control design using robust right coprime factorization [J]. IEEE Transactions on Automatic Control, 2006, 51(4): 645-648

[11]

WenS-J, DengM-C. Operator-based robust nonlinear control and fault detection for a Peltier actuated thermal process [J]. Mathematical and Computer Modelling, 2013, 57(12): 16-29

[12]

DengM-COperator-based nonlinear control systems [M], 2014, Hoboken, NJ, USA, John Wiley & Sons, Inc.

[13]

DengM-C, JiangC-G, InoueA, SuC-Y. Operator-based robust control for nonlinear systems with Prandtl-Ishlinskii hysteresis [J]. International Journal of Systems Science, 2011, 42(4): 643-652

[14]

ZhangT, MaQ. Target location and tracking based on local background feature points [J]. Journal of Central South University: Science and Technology, 2016, 47(9): 3040-3049(in Chinese)

[15]

HuX-H, GuoL, LiH-H, YanP-D. New method for joint detection and tracking with variable maneuvering target number [J]. Journal of Central South University: Science and Technology, 2016, 47(10): 3424-3435(in Chinese)

[16]

YangQ, ChenW-N, YuZ-T, GuT-L, LiY, ZhangH-X, ZhangJ. Adaptive multimodal continuous ant colony optimization [J]. IEEE Transactions on Evolutionary Computation, 2017, 21(2): 191-205

[17]

ChenZ-G, ZhanZ-H, LinY, GongY-J, GuT-L, ZhaoF, YuanH-Q, ChenX-F, LiQ, ZhangJ. Multiobjective cloud workflow scheduling: A multiple populations ant colony system approach [J]. IEEE Transactions on Cybernetics, 2019, 49(8): 2912-2926

[18]

GongY-J, ChenE, ZhangX-L, NiL M, ZhangJ. AntMapper: An ant colony-based map matching approach for trajectory-based applications [J]. IEEE Transactions on Intelligent Transportation Systems, 2018, 19(2): 390-401

AI Summary AI Mindmap
PDF

144

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/