Analysis on vertical steering vibration of drum shearer cutting part

Abstract

The impact of the load on the shearer is mainly transmitted through cutting part. In this paper, in order to get the vertical steering vibration characteristics of the cutting part of the drum shearer, the working condition of coal mining machine is simplified. A simplified vertical steering model and the simplified vibration model of the whole cutting part of shearer are established. The vertical steering vibration process of the cutting unit is simplified into a single freedom and one forced vibration system under harmonic excitation. The dynamic response of the cutting part under sine excitation is obtained by using Matlab/Simulink for modeling and simulation. The influence of the support rigidity and damping of the high oil cylinder on the vertical steering vibration characteristics of the cutting part is analyzed. The results show that the damping of the cylinder can reduce the vibration of the system and the stability of the swing process of cutting the part is improved.

Keywords

drum shearer / shearer cutting part / vertical steering vibration / Matlab/Simulink

References

[1] DolipskiM, JaszczukM, CheluszkaP. Designing of new energy-saving cutting drums of longwall shearers [J]. Australasian Institute of Mining and Metallurgy Publication Series, 2015, 1: 331-340

[2] LiL, NiSong. Shearer gearbox fault diagnosis based on improved wavelet denoising pretreatment and EEMD [J]. Journal of Central South University (Science and Technology), 2016, 47(10): 3394-3400

[3] LuoC, JiangH, CuiXin. Experimental study on the axial force of shearer drum cutting coal and rock [J]. Recent Patents on Mechanical Engineering, 2015, 8(1): 70-78

[4] WangQ, XieX, ChenF, HanZ, ChenChong. Simulative cutting test of the working unit of shearer for surface mines [J]. Journal of China University of Mining and Technology, 1996, 25(4): 12-16

[5] WuP, ZengJ, DaiH. Dynamic response analysis of railway passenger car with flexible carbody model based on the semi-active suspensions [J]. Vehicle System Dynamics, 2004, 41: 774-783

[6] EbrahimiS, EberhardP. Rigid-elastic modeling of gear wheels in multibody systems [J]. Multibody System Dynamics, 2006, 16(1): 55-71

[7] JiaoL, LiX, YaoJi. Dynamics analysis of double-drum shearer and mechanical model establishment [J]. Journal of Liaoning Technical University, 2007, 26(4): 602-603

[8] BalciC, BilginN. Correlative study of linear small and full-scale rock cutting tests to select mechanized excavation machines [J]. International Journal of Rock Mechanics & Mining Sciences, 2007, 44(3): 468-476

[9] DuC, LiuS, CuiXin. Study on pick arrangement of shearer drum based on load fluctuation [J]. Journal of China University of Mining and Technology, 2008, 18(2): 305-310

[10] ZhaoL, MaYong. Reliability research on shearer cutting unit based on multi-body dynamics [J]. Journal of the China Coal Society, 2009, 34(9): 1271-1275

[11] ZhaoL, WangCheng. Modeling and dynamic simulation of shearer cutting unit [J]. Journal of Engineering Design, 2010, 17(2): 119-23

[12] WangZ, XuZ, DongXiao. Self-adaptive adjustment height of the drum in the shearer based on artificial immune and memory cutting [J]. Journal of the China Coal Society, 2009, 34(10): 1405-1409

[13] GermayC, DenoëlV, DetournayE. Multiple mode analysis of the self-excited vibrations of rotary drilling systems [J]. Journal of Sound and Vibration, 2009, 325(1): 362-381

[14] PratheepaB. Modeling and simulation of automobile suspension system [J]. Frontiers in Automobile and Mechanical Engineering, 2010, 43(2): 377-382

[15] SahebkarS, GhazaviM, KhademS, GhayeshM. Nonlinear vibration analysis of an axially moving drillstring system with time dependent axial load axial velocity in inclined well [J]. Mechanism and Machine Theory, 2011, 46(5): 743-760

[16] GuoW, ZhuN, ZhaoShuan. A method of calculation for the shearer drum cutting path [M]//Informatics in Control, Automation and Robotics. Berlin Heidelberg: Springer, 2011

[17] YangD, LiJ, WangY, JiangHong. Research on vibration and deflection for drilling tools of coal auger [J]. Journal of Vibro Engineering, 2017, 19(7): 4882-4897

[18] FuL, DuC, LiJ, YangDao. Structure and parameter analysis of auger miner’s coal plough [J]. Journal of Central South University (Science and Technology), 2017, 48(3): 675-683

[19] ZhaoS, GuoWei. An EMD based simulation of the drum resistance torque spectrum of a shearer [C]//IEEE International Conference on Computer Science and Automation Engineering. IEEE, 2012, 3: 367-371

[20] DingH, YangZhao. Method and system of shearer cutting unit modern design oriented to KBE [J]. Journal of the China Coal Society, 2012, 37(10): 765-1770

[21] ChengC, LiS, WangY, JiangXing. Performance analysis of high-static-low-dynamic stiffness vibration isolator with time-delayed displacement feedback [J]. Journal of Central South University, 2017, 24(10): 2294-2305

[22] LiJ, GuoHui. Vibration characteristics of shearer cutting unit based on multi-body dynamics [J]. Electronic Journal of Geotechnical Engineering, 2014, 19(4): 3195-3208

[23] WangY, SunD, LiuChang. Study on characteristics of external load of transmission system for cutting unit of shearer under multiple load cases [J]. Computer Modelling and New Technologies, 2014, 18(12): 326-330

[24] GaoK, DuC, LiuS, FuLin. Analysis on significance of the factors influencing on shearer drum cutting performance [J]. International Journal of Oil, Gas and Coal Technology, 2014, 7(4): 386-98

[25] YangD, LiJ, WangL, GaoK, TangY, WangYan. Experimental and theoretical design for decreasing wear in conical picks in rotation-drilling cutting process [J]. International Journal of Advanced Manufacturing Technology, 2015, 77(9): 1571-1579

[26] YangD, LiJ, DuC, LiuS, ZhengK, JiangHong. Wear performance of conical pick in rotary-drilling cutting process [J]. Electronic Journal of Geotechnical Engineering, 2015, 20(8): 2031-2040

[27] YangD, LiJ, ZhengK, JiangH, XuH, LiuSong. High-hardness alloy substituted by low hardness during drilling and cutting experiments of conical pick [J]. International Journal of Rock Mechanics and Mining Sciences, 2017, 95: 73-78

[28] DengJ, LvG, LiG, ZhangGuo. Vertical sectorization using beam steering in cellular communication systems [C]//IEEE/CIC International Conference on Communications in China-Workshops. IEEE, 20142125