Ground stability of underground gateroad with 1 km burial depth: A case study from Xingdong coal mine, China

Abstract

This paper presents an integrated investigation of the ground stability of a deep gateroad with a 1 km burial depth based on a field test, case studies, and numerical modelling. In situ stress measurements and mechanical properties tests were first conducted in the test site. Then, the deformation behavior, stress and yield zone distributions, as well as the bolts load of the gateroad, were simulated using FLAC^3D software. The model results demonstrated that the soft rock properties and high in situ stress were the main factors for the deep gateroad instability, and the shear slip failure induced by the high stress was the primary failure model for the deep rock mass. In addition, the unsuitable support patterns, especially the relatively short bolts/cables with low pre-tensions, the lack of high-strengthen secondary supports and the unsupported floor strata, also contributed to the gateroad instability. Subsequently, a new combined supporting strategy, incorporating longer bolts/cables, yielding ring supports, and grouting measures, was proposed for the deep gateroad, and its validity was verified via field monitoring. All these could be a reference for understanding the failure mechanism of the gateroad with 1 km burial depth.

Keywords

deep coal mine / soft rock / burial depth / failure mechanism / deformation behavior / support strategy

References

[1] HuangW, YuanQ, TanY, WangJ, LiuG, QuG, LiChao. An innovative support technology employing a concrete-filled steel tubular structure for a 1000-m-deep roadway in a high in situ stress field [J]. Tunnelling and Underground Space Technology, 2018, 73: 26-36

[2] ZhangG, HeF, JiaH, LaiYong. Analysis of gateroad stability in relation to yield pillar size: A case study [J]. Rock Mechanics and Rock Engineering, 2017, 50(5): 1-16

[3] TanY, YuF, NingJ, ZhaoTong. Design and construction of entry retaining wall along a gob side under hard roof stratum [J]. International Journal of Rock Mechanics and Mining Sciences, 2015, 77: 115-121

[4] ZhaoT, GuoW, TanY, YinY, CaiL, PanJun. Case studies of rock bursts under complicated geological conditions during multi-seam mining at a depth of 800 m [J]. Rock Mechanics and Rock Engineering, 2018, 51: 1539-1564

[5] ShreedharanS, KulatilakeP H S W. Discontinuum-equivalent continuum analysis of the stability of tunnels in a deep coal mine using the distinct element method [J]. Rock Mechanics and Rock Engineering, 2016, 49(5): 1903-1922

[6] KangH, LvH, ZhangX, GaoF, WuZ, WangZhi. Evaluation of the ground response of a pre-driven longwall recovery room supported by concrete cribs [J]. Rock Mechanics & Rock Engineering, 2016, 49(3): 1025-1040

[7] WhittakerB N, SinghR N. Stability of longwall mining gate in relation to rib pillar size [J]. International Journal of Rock Mechanics and Mining Sciences, 1981, 18(4): 331-334

[8] ShenB K A G H. Displacement, stress and seismicity in roadway roofs during mining-induced failure [J]. International Journal of Rock Mechanics and Mining Sciences, 2008, 45(5): 672-688

[9] LiS W H-t W Q, JiangB, WangF, GuoN, LiuW, RenYao. Failure mechanism of bolting support and high-strength boltgrouting technology for deep and soft surrounding rock with high stress [J]. Journal of Central south university, 2016, 23(2): 440-448

[10] YuanL, XueJ, LiuQ, LiuBin. Surrounding rock stability control theory and support technique in deep rock roadway for coal mine [J]. Journal of the China Coal Society, 2011, 36(4): 535-543

[11] ShenBao. Coal mine roadway stability in soft rock: A case study [J]. Rock Mechanics and Rock Engineering, 2014, 47(6): 2225-2238

[12] Carranza-TorresC. Analytical and numerical study of the mechanics of rockbolt reinforcement around tunnels in rock masses [J]. Rock Mechanics and Rock Engineering, 2009, 42(2): 175-228

[13] KushwahaA, SinghS K, TewariS, SinhaA. empirical approach for designing of support system in mechanized coal pillar mining [J]. International Journal of Rock Mechanics and Mining Sciences, 2010, 47(7): 1063-1078

[14] TanY, LiuX, NingJ, LvYan. In situ investigations on failure evolution of overlying strata induced by mining multiple coal seams [J]. Geotechnical Testing Journal, 2017, 40(2): 244-257

[15] ZhangZ S H, QianD S T. Application of the retained gob-side gateroad in a deep underground coalmine [J]. International Journal of Mining Reclamation and Environment, 2015, 30(5): 371-379

[16] FengX, ZhangN, HeF, YangS, ZhengXi. Implementation of a pre-tensioned, fully bonded, bolting system and its failure mechanism based on acoustic emission: A laboratorial and field study [J]. Geotechnical Testing Journal, 2017, 40(6): 978-999

[17] ZhaoT, GuoW, TanY-L, LuC, WangCheng. Case histories of rock bursts under complicated geological conditions [J]. Bulletin of Engineering Geology and the Environment, 2017

[18] CaiM, HeM, LiuDongRock mechanics and engineering [M], 2013, Beijing, Science Press

[19] HuangW, LiC, ZhangL, YuanQ, ZhengY, LiuYang. In situ identification of water-permeable fractured zone in overlying composite strata [J]. International Journal of Rock Mechanics and Mining Sciences, 2018, 105: 85-97

[20] ZhangK, ZhangG, HouR, WuY, ZhouHong. Stress evolution in roadway rock bolts during mining in a fully mechanized longwall face, and an evaluation of rock bolt support design [J]. Rock Mechanics and Rock Engineering, 2015, 48(1): 333-344

[21] ZhangG, LiangS, TanY, XieF, ChenS, JiaHong. Numerical modeling for longwall pillar design: A case study from a typical longwall panel in China [J]. Journal Geophysics and Engineering, 2018, 15(1): 121-134

[22] NingJ, WangJ, JiangJ, HuS, JiangL, LiuXue. Estimation of crack initiation and propagation thresholds of confined brittle coal specimens based on energy dissipation theory [J]. Rock Mechanics and Rock Engineering, 2018, 51: 119-134