Power production enhancement with polyaniline composite anode in benthic microbial fuel cells

Abstract

In this study, conductive polymer polyaniline (PANI) is employed to modify the anodes of benthic microbial fuel cells (BMFC). Four electrochemical methods are used to synthesize the polyaniline anodes; the results show that the PANI modification, especially the pulse potential method for PANI synthesis could obviously improve the cell energy output and reduce the anode internal resistance. The anode is modified by PANI doped with Fe or Mn to further improve the BMFC performance. A maximum power density of 17.51 mW/m² is obtained by PANI-Fe anode BMFC, which is 8.1 times higher than that of control. The PANI-Mn anode BMFC also gives a favorable maximum power density (16.78 mW/m²). Fe or Mn modification has better effect in improving the conductivity of polyaniline, thus improving the energy output of BMFCs. This work applying PANI composite anode into BMFC brings new development prospect and could promote the practical application of BMFC.

Keywords

benthic microbial fuel cell / anode modification / polyaniline / high power output

References

[1] DonovanC, DewanA, PengH, HeoD, BeyenalH. Power management system for a 2.5 W remote sensor powered by a sediment microbial fuel cell [J]. Journal of Power Sources, 2011, 196(3): 1171-1177

[2] LiuB, WeinsteinA, KollnM, GarrettC, WangL, BagtzoglouA, KarraU, LiY, LiB. Distributed multiple-anodes benthic microbial fuel cell as reliable power source for subsea sensors [J]. Journal of Power Sources, 2015, 286: 210-216

[3] LiuB, WilliamsI, LiY, WangL, BagtzoglouA, MccutcheonJ, LiB. Towards high power output of scaled-up benthic microbial fuel cells (BMFCs) using multiple electron collectors [J]. Biosensors and Bioelectronics, 2016, 79: 435-441

[4] JiangH-m, LuoS-j, ShiX-s, DaiM, GuoR-bo. A system combining microbial fuel cell with photobioreactor for continuous domestic wastewater treatment and bioelectricity generation [J]. Journal of Central South University, 2013, 20(2): 488-494

[5] HaoL-m, YanX-l, XieY, ZhangT, ChenZhi. A rapid one-step electrodeposition process for fabrication of superhydrobic surfaces on anode and cathode [J]. Journal of Central South University, 2016, 23(7): 1576-1583

[6] LaiB, TangX-h, LiH-r, DuZ-w, LiuX-w, ZhangQian. Power production enhancement with a polyaniline modified anode in microbial fuel cells [J]. Biosensors and Bioelectronics, 2011, 28(1): 373-377

[7] ZhaoY, NakanishiS, WatanabeK, HashimotoK. Hydroxylated and aminated polyaniline nanowire networks for improving anode performance in microbial fuel cells [J]. Journal of Bioscience and Bioengineering, 2011, 112(1): 63-66

[8] SunM, SongW, ZhaiL-f, RuX-r, CuiY-zhi. Elucidating electro-oxidation kinetics of Fe(II) in the anode of air–cathode fuel cells from an Fe(II) speciation perspective [J]. Chemical Engineering Journal, 2013, 228: 781-789

[9] FuY-b, YuJ, ZhangY-l, MengYao. Graphite coated with manganese oxide/multiwall carbon nanotubes composites as anodes in marine benthic microbial fuel cells [J]. Applied Surface Science, 2014, 317: 84-89

[10] FuY-b, XuQ, ZaiX-r, LiuY-y, LuZ-kai. Low electrical potential anode modified with Fe/ferric oxide and its application in marine benthic microbial fuel cell with higher voltage and power output [J]. Applied Surface Science, 2014, 289: 472-477

[11] SunL, LiuX, LauK K T, ChenL, GuW. Electrodeposited hybrid films of polyaniline and manganese oxide in nanofibrous structures for electrochemical supercapacitor [J]. Electrochimica Acta, 2008, 53(7): 3036-3042

[12] JiaY-h, YeL, KangX, YouH, WangS-t, YaoJie. Photoelectrocatalytic reduction of perchlorate in aqueous solutions over Ag doped TiO2 nanotube arrays [J]. Journal of Photochemistry and Photobiology A: Chemistry, 2016, 328: 225-232

[13] HeZ, MansfeldF. Exploring the use of electrochemical impedance spectroscopy (EIS) in microbial fuel cell studies [J]. Energy & Environmental Science, 2009, 2(2): 215-219

[14] QiaoY, LiC-m, BaoS-j, BaoQ-liang. Carbon nanotube/polyaniline composite as anode material for microbial fuel cells [J]. Journal of Power Sources, 2007, 170(1): 79-84

[15] HouJ-x, LiuZ-l, ZhangP-yuan. A new method for fabrication of graphene/polyaniline nanocomplex modified microbial fuel cell anodes [J]. Journal of Power Sources, 2013, 224: 139-144

[16] WangY-q, LiB, ZengL-z, CuiD, XiangX-d, LiW-shan. Polyaniline/mesoporous tungsten trioxide composite as anode electrocatalyst for highperformance microbial fuel cells [J]. Biosensors and Bioelectronics, 2013, 41: 582-588

[17] HongS W, ChangI S, ChoiY S, ChungT H. Experimental evaluation of influential factors for electricity harvesting from sediment using microbial fuel cell [J]. Bioresource Technology, 2009, 100(12): 3029-3035

[18] WeiX L, WangY Z, LongS M, BobeczkoC, EpsteinA J. Synthesis and physical properties of highly sulfonated polyaniline [J]. Journal of the American Chemical Society, 1996, 118(11): 2545-2555

[19] MacdiarmidA G, ChiangJ C, RichterA F, EpsteinA J. Polyaniline: A new concept in conducting polymers [J]. Synthetic Metals, 1987, 18(1–3): 285-290

[20] WangH-z, LiuW-h, LiJ, YaoS-w, ZhangW-guo. Preparation and characterization of polyaniline film by potentiostatic pulse method [J]. Chemical Journal of Chinese Universities, 2012, 33(2): 421-425

[21] YooJ E, BucholzT L, JungS, LooY L. Narrowing the size distribution of the polymer acid improves PANI conductivity [J]. Journal of Materials Chemistry, 2008, 18(26): 3129-3135

[22] RayA, AsturiasG E, KershnerD L, RichterA F, MacdiarmidA G, EpsteinA J. Polyaniline: Doping, structure and derivatives [J]. Synthetic Metals, 1989, 29(1): 141-150