Prediction of upper limit position of bedding separation overlying a coal roadway within an extra-thick coal seam

Abstract

Failure of the surrounding rock around a roadway induced by roof separation is one major type of underground roof-fall accidents. This failure can especially be commonly-seen in a bottom-driven roadway within an extra-thick coal seam (“bottom-driven roadway” is used throughout for ease of reference), containing weak partings in their roof coal seams. To determine the upper limit position of the roof interlayer separation is the primary premise for roof control. In this study, a mechanical model for predicting the interlayer separation overlying a bottom-driven roadway within an extra-thick coal seam was established and used to deduce the vertical stress, and length, of the elastic, and plastic zones in the rock strata above the wall of the roadway as well as the formulae for calculating the deflection in different regions of rock strata under bearing stress. Also, an approach was proposed, calculating the stratum load, deflection, and limiting span of the upper limit position of the interlayer separation in a thick coal seam. Based on the key strata control theory and its influence of bedding separation, a set of methods judging the upper limit position of the roof interlayer separation were constructed. In addition, the theoretical prediction and field monitoring for the upper limit position of interlayer separation were conducted in a typical roadway. The results obtained by these two methods are consistent, indicating that the methods proposed are conducive to improving roof control in a thick coal seam.

Keywords

extra-thick coal seam / bedding separation / coal roadway / roof fall / mechanical model

References

[1] UNALE, OZKANI, CAKMAKCIG. Modeling the behaviour of longwall coal mine gate roadways subjected to dynamic loading [J]. International Journal of Rock Mechanics and Mining Sciences, 2001, 38(2): 181-197

[2] GONGF-q, LIX-b, GAOKe. Catastrophe progression method for stability classification of underground engineering surrounding rock [J]. Journal of Central South University: Science and Technology, 2008, 39(5): 1081-1087

[3] LIUH-taoResearch on the design method of parameters supporting with bolt in coal road on the base of the anchored-clustered structure [D], 2007, Beijing, China University of Mining and Technology (Beijing)

[4] JIANGL-s, SAINOKIA, MITRIH S, MAN-j, HAOZhen. Influence of fracture-induced weakening on coal mine gateroad stability [J]. International Journal of Rock Mechanics and Mining Sciences, 2016, 88: 307-317

[5] ZHANGY, WANZ-j, GUB, ZHOUC-bing. An experimental investigation of transient heat transfer in surrounding rock mass of high geothermal roadway [J]. Thermal Science, 2016, 20(6): 2115-2124

[6] KUSHWAHAA, SINGHSK, TEWARIS, SINHAA. Empirical approach for designing of support system in mechanized coal pillar mining [J]. International Journal of Rock Mechanics and Mining Sciences, 2010, 47(7): 1063-1078

[7] PALEIS K, DASS K. Sensitivity analysis of support safety factor for predicting the effects of contributing parameters on roof falls in underground coal mines [J]. International Journal of Coal Geology, 2008, 75(4): 241-247

[8] XIEH-p, WANGJ-h, SHENB-h, LIUJ-z, JIANGP-f, ZHOUH-w, LIUH, WUGang. New idea of coal mining: Scientific mining and sustainable mining capacity [J]. Journal of China Coal Society, 2012, 37(7): 1069-1079

[9] YANHongRoof coal deformation mechanism and its control technology for roadways driving along the floor in ultra-thick coal seams [M], 2017, Xuzhou, China University of Mining and Technology Press

[10] KUMARAR, SINGHAA K, MISHRABA K, SINGHAR. Underground mining of thick coal seams [J]. International Journal of Mining Science and Technology, 2015, 25(6): 885-896

[11] WANGQiResearch on control mechanism of surrounding rock failure in deep roadways with thick top-coal and contrast of new support systems [D], 2012, Jinan, Shandong University

[12] LIS C, WANGQ, WANGH T, JIANGB, WANGD C, ZHANGB, LIY, RUANG Q. Model test study on surrounding rock deformation and failure mechanisms of deep roadways with thick top coal [J]. Tunnelling and Underground Space Technology, 2015, 47: 52-63

[13] HEBBLEWHITEB K, LUT. Geomechanical behavior of laminated, weak coal mine roof strata and the implications for a ground reinforcement strategy [J]. International Journal of Rock Mechanics and Mining Sciences, 2004, 41(1): 147-157

[14] LUT-k, LIUY-z, YUH-yong. Separation characteristics and mechanisms of laminated composite roof strata of longwall roadway [J]. Chinese Journal of Rock Mechanics and Engineering, 2005, 24: 4663-4669

[15] SHENB-t, POULSENB. Investigation of overburden behaviour for grout injection to control mine subsidence [J]. International Journal of Mining Science and Technology, 2014, 24(3): 317-323

[16] ZHANGN, YUANLiang. Control principle of separating and broken roof rock strata in roadway [J]. Journal of Mining & Safety Engineering, 2006, 23(1): 34-38

[17] SHENR-x, LIUC-y, WUX-yi. Analysis and calculation on roof separation critical values of solid-coal roadway and gob-side roadway supported with bolts [J]. Journal of Sichuan University: Engineering Science Edition, 2007, 39(3): 19-23

[18] GUS-c, DINGXiao. Elastoplastic analysis of effect of bed separation on anchored mass loading in rock mass [J]. Rock and Soil Mechanics, 2013, 34(9): 2649-2654

[19] JACOBO. The origin of roof falls in starting faces with the caving system [J]. International Journal of Rock Mechanics and Mining Sciences, 1964, 1(3): 313-314

[20] ZHANGG-h, LIANGB, ZHANGH-w, ZHANGX-feng. Analysis of the roof separation in mining roadway and technical parameters determination of bolt combined supporting [J]. Journal of Chongqing University, 2010, 33(7): 135-140

[21] HANC-l, ZHANGN, LIG-c, KANJ-guang. Bed separation mechanism under sequential roof collapse condition in a gob-side entry retaining [J]. Journal of China University of Mining & Technology, 2012, 41(6): 893-899

[22] YUT, WANGL-gui. Mechanism of generation of overburden separation layer [J]. Journal of Liaoning Technical University, 2006, 25(1): 132-134

[23] APELD B. Using ground penetrating radar (GPR) in analyzing structural composition of mine roof [J]. Mining Engineering, 2005, 57: 56-60

[24] XIEJ-l, XUJ-lin. Numerical and physical simulation of the detection of roof separation with ground penetrating radar [J]. Journal of Mining & Safety Engineering, 2017, 34(2): 317-322

[25] ZHANGB-s, KANGL-x, YANGS-suo. Numerical simulation on roof separation and deformation of full seam roadway with stratified roof and large section [J]. Journal of Mining & Safety Engineering, 2006, 23(3): 264-267

[26] QIANP-g, XIEH-ping. Stability analysis of the damage rock strata within the roof and floor of the roadway [J]. Jiangsu Coal, 1992, 12(3): 12-15

[27] WUD-y, WENG-k, WANGA-lan. Discrimination of stability between layers of compound roof in deep mining [J]. Journal of Mining & Safety Engineering, 2011, 28(2): 252-257

[28] KWONS, WILSONJ W. Deformation mechanism of the underground excavations at the WIPP site [J]. Rock Mechanics and Rock Engineering, 1999, 32(2): 101-122

[29] QIANM-g, MIAOX-x, XUJ-linKey strata theory in ground control [M], 2003, Xuzhou, China University of Mining and Technology Press