A novel LS-SVM control for unknown nonlinear systems with application to complex forging process

Abstract

A novel LS-SVM control method is proposed for general unknown nonlinear systems. A linear kernel LS-SVM model is firstly developed for input/output (I/O) approximation. The LS-SVM control law is then derived directly from this developed model without any approximation and assumption. It further proves that the control error is fully equal to the LS-SVM modeling error. This means that a desirable control performance can be achieved because the LS-SVM has been proven to have an outstanding modeling ability in the previous studies. Case studies finally demonstrate the effectiveness of the proposed LS-SVM control approach.

Keywords

unknown system / inverse control / input/output approximation / LS-SVM control / linear kernel

References

[1] ChoS J, LeeJ C, JeonY H, JeonJ WThe development of a position conversion controller for hydraulic press systems [C]//Proc IEEE Int Conf Robot Biomimetics, 200920192022

[2] ZhouY C, LiuS J, LiuZ W, HuangM H. Hydraulic position holding system of a huge water press based on iterative learning control [J]. Mechanical Science and Technology for Aerospace Engineering, 2008, 27(9): 1130-1133

[3] GaoC, JianL, LuoS. Modeling of the thermal state change of blast furnace hearth with support vector machines [J]. IEEE Tran on Industrial Electronics, 2012, 59(2): 1134-1145

[4] EBRAHIMIB M, JAVANR M, FAIZJ, KHATAMIS V. Advanced eccentricity fault recognition in permanent magnet synchronous motors using stator current signature analysis [J]. IEEE Tran on Industrial Electronics, 2014, 61(4): 2041-2052

[5] QiC K, LiH X, ZhangX X, ZhaoX, LiSY, GaoF. Time/Space-separation-based SVM modeling for nonlinear distributed parameter processes [J]. Ind Eng Chem Res, 2011, 50: 332-341

[6] HeK, LiX. A quantitative estimation technique for welding quality using local mean decomposition and support vector machine [J]. Journal of Intelligent Manufacturing, 2016, 27(3): 525-533

[7] KaoL J, LeeT S, LuC J. A multi-stage control chart pattern recognition scheme based on independent component analysis and support vector machine [J]. Journal of Intelligent Manufacturing, 2016, 27(3): 653-664

[8] ÇaydasU, EkiciS. Support vector machines models for surface roughness prediction in CNC turning of AISI 304 austenitic stainless steel [J]. Journal of Intelligent Manufacturing, 2012, 23(3): 639-650

[9] BenkedjouhT, MedjaherK, ZerhouniN, RechakS. Health assessment and life prediction of cutting tools based on support vector regression [J]. Journal of Intelligent Manufacturing, 2015, 26(2): 213-223

[10] ZhouL, LaiK K, YuL. Least squares support vector machines ensemble models for credit scoring [J]. Expert Systems with Applications, 2010, 37(1): 127-133

[11] KimW, ParkJ, YooJ, KimH J, ParkC G. Target localization using ensemble support vector regression in wireless sensor networks [J]. IEEE Transactions on Cybernetics, 2013, 43(4): 1189-1198

[12] JianL, XiaZ, LiangX, GaoC. Design of a multiple kernel learning algorithm for LS-SVM by convex programming [J]. Neural Networks, 2011, 24(5): 476-483

[13] QiG J, TiQ, HuangTLocality-sensitive support vector machine by exploring local correlation and global regularization [C]//IEEE Conference on Computer Vision and Pattern Recognition (CVPR), 2011, Boston, USA, IEEE

[14] QiuS, LaneT. A framework for multiple kernel support vector regression and its applications to siRNA efficacy prediction [J]. IEEE/ACM Transactions on Computational Biology and Bioinformatics, 2009, 6(2): 190-199

[15] ZhangG, LiH X, GanM. Design a wind speed prediction model using probabilistic fuzzy system [J]. IEEE Trans on Industrial Informatics, 2012, 8(4): 819-827

[16] LiuZ, LiH X, ZhangY. A probabilistic wavelet system for stochastic and incomplete data-based modeling [J]. IEEE Trans Systems Man and Cybernetics Part B, 2008, 38(2): 310-319

[17] SUYKENSJ A, BRABANTERJ, LUKASL, VANDEWALLEJ. Weighted least squares support vector machines: Robustness and sparse approximation [J]. Neurocomputing, 2002, 48: 85-105

[18] VALYONJ, HORVATHG. A robust LS-SVM regression [J]. International Journal of Computational Intelligence, 2006, 3(3): 243-248

[19] WenW, HaoZ F, YangX W. A heuristic weight-setting strategy and iteratively updating algorithm for weighted least-squares support vector regression [J]. Neurocomputing, 2008, 71(16–18): 3096-3103

[20] WongP K, XuQ, VongC M, WongH C. Rate-Dependent hysteresis modeling and control of a piezostage using online support vector machine and relevance vector machine [J]. IEEE Tran on Industrial Electronics, 2012, 59(4): 1988-2001

[21] de BrabanterK, de BrabanterJ, SuykensJ A, de MoorB. Approximate confidence and prediction intervals for least squares support vector regression [J]. IEEE Trans on Neural Networks, 2011, 22(1): 110-120

[22] LiH X, YangJ L, ZhangG, FanB. Probabilistic support vector machines for classification of noise affected data [J]. Information Sciences, 2013, 221: 60-71

[23] YangJ L, LiH X, YongH. A probabilistic SVM based decision system for pain diagnosis [J]. Expert Systems with Applications, 2011, 38(8): 9346-9351

[24] WangZ, ZhangZ, MaoJ. Adaptive tracking control based on online LS-SVM identifier [J]. International Journal of Fuzzy Systems, 2012, 14(2): 330-336

[25] YuanX, WangY. LS-SVM modeling based inverse controller with uncertainty compensation [J]. Journal of Dynamic Systems Measurement and Control, 2007, 129: 845-850

[26] DengH, LiH X. A novel neural approximate inverse control for unknown nonlinear discrete dynamic systems [J]. IEEE Trans on Systems Man, and Cybernetics Part B: Cybernetics, 2005, 35(1): 115-123

[27] LiH X, DengH. An approximate internal model based neural control for unknown nonlinear discrete processes [J]. IEEE Trans on Neural Networks, 2006, 17(3): 659-670

[28] XiX C, PooA N, ChouS K. Support vector regression model predictive control on a HVAC plant [J]. Control Engineering Practice, 2007, 15: 897-908

[29] SuykensJ A, VandewalleJ, MoorB D. Optimal control by least squares support vector machines [J]. Neural Networks, 2001, 14(1): 23-25

[30] SuykensJ A, GestelT V, BrabanterJ D, MoorB D, VandewalleJLeast squares support vector machines [M], 2002, Singapore, World Scientific

[31] WangH, PiD, SunY. Online SVM regression algorithm based adaptive inverse control [J]. Neurocomputing, 2007, 7: 52-59

[32] SpooerJ T, MaggioreM, OrdonezR, PassionK MStable adaptive control and estimation for nonlinear systems [M], 2002, New York, Wiley: 6976

[33] LuX J, HuangM H. A novel multi-level modeling method for complex forging processes on hydraulic press machines [J]. International Journal of Advanced Manufacturing Technology, 2015, 79(9): 1869-880

[34] LuX J, HuangM H. A simple online modeling approach for a time-varying forging process [J]. International Journal of Advanced Manufacturing Technology, 2014, 75: 1197-1205