Rock fragmentation under different installation polar angles of TBM disc cutters

Abstract

The disc cutters of tunnel boring machine (TBM) are installed with different polar angles. This causes the cutting depth difference between adjacent disc cutters on the tunnel face. A rock-cutting model was established to study the rock fragmentation law between adjacent disc cutters with different polar angles based on particle flow code (PFC). The influence of polar angle of adjacent disc cutters on rock cracks and stresses under different cutter spacing and penetration was studied. Research shows that polar angle difference leads to the discontinuity of rock-fragmentation process by adjacent cutters. The effect of rock-fragmentation is influenced by the cutting depth difference between adjacent cutters. The effect of rock-fragmentation performed best, meanwhile large rock blocks were flaked when the difference of cutting depth is half of the penetration. Too large or small difference of the cutting depth will cause high specific energy consumption of rock fragmentation. The specific energy consumption is relatively small when the difference of cutting depth is half of the penetration.

Keywords

tunnel boring machine / disc cutter / polar angle / particle flow code / rock fragmentation

References

[1] XiaY-m, OuyangT, ZhangX-m, LuoD-zhi. Mechanical model of breaking rock and force characteristic of disc cutter[J]. Journal of Central South University of Technology, 2012, 19(7): 1846-1852

[2] GongQ M, ZhaoJ. Influence of rock brittleness on TBM penetration rate in Singapore granite [J]. Tunnelling and Underground Space Technology, 2007, 22(3): 317-324

[3] WangL-h, KangY-lan. The energy method to predict disc cutter wear extent for hard rock TBMs [J]. Tunnelling and Underground Space Technology, 2011, 28: 183-191

[4] TuncdemirH, BilginN, CopurH, BalciC. Control of rock cutting efficiency by muck size [J]. International Journal of Rock Mechanics and Mining Sciences, 2008, 45(2): 278-288

[5] RostamiJ. Study of pressure distribution within the crushed zone in the contact area between rock and disc cutters [J]. International Journal of Rock Mechanics and Mining Sciences, 2013, 57: 172-186

[6] KouS Q, HuangY, TanX C, LindqvistP A. Identification of the governing parameters related to rock indentation depth by using similarity analysis [J]. Engineering Geology, 1998, 49(3): 261-269

[7] LiuH Y, KouS Q, LindpvistP A, TangC A. Numerical modelling of the heterogeneous rock fracture process using various test techniques [J]. Rock Mechanics and Rock Engineering, 2007, 40(2): 107-144

[8] LiuH Y, KouS Q, LindpvistP A, TangC A. Numerical simulation of the rock fragmentation process induced by indenters [J]. International Journal of Rock Mechanics and Mining Sciences, 2002, 39(4): 491-505

[9] SuL J, SunJ S, LuW B. Research on numerical simulation of rock fragmentation by TBM cutters using particle flow method [J]. Rock and Soil Mechanics, 2009, 30(9): 2823-2829

[10] BalciC, TumacD. Investigation into the effects of different rocks on rock cuttability by a V-type disc cutter [J]. Tunnelling and Underground Space Technology, 2012, 30: 183-193

[11] TanQ, ZhuY, XiaY-m, XuZ-j, LiJ-f, SongJ-hua. Influence of joint characteristics on rock fragmentation induced by TBM disc cutter [J]. Journal of Central South University of Technology: Science and Technology, 2013, 44(10): 4040-4046

[12] LiuJ, CaoP, JiangZ, ZhaoY-l, CaoR-hong. Numerical simulation on effects of embedded crack on rock fragmentation by a tunnel boring machine cutter [J]. Journal of Central South University, 2014, 21(8): 3302-3308

[13] MaH S, YinL J, JiH G. Numerical study of the effect of confining spacing stress on rock fragmentation by TBM cutters [J]. International Journal of Rock Mechanics & Mining Sciences, 2011, 48(6): 1021-1033

[14] LiuJ-s, CaoP, LiuJ, JiangZhe. Influence of confining stress on fracture characteristics and efficiency of TBM cutters conducted on soft and hard rock [J]. Journal of Central South University, 2015, 22(5): 1947-1955

[15] BalciC. Correlation of rock cutting tests with field performance of a TBM in a highly fractured rock formation: A case study in Kozyatagi-Kadikoy metro tunnel [J]. Tunnelling and Underground Space Technology, 2009, 24(4): 423-435

[16] ChoJ W, JeonS, YuS H, ChangS H. Optimum spacing of TBM disc cutters: A numerical simulation using the three-dimensional dynamic fracturing method [J]. Tunnelling and Underground Space Technology, 2010, 25(3): 230-244

[17] TanQ, YiN-e, XiaY-m, XuZ-j, ZhuY, SongJ-hua. Research on rock dynamic fragmentation characteristics by TBM cutters and cutter spacing optimization [J]. Chinese Journal of Rock Mechanics and Engineering, 2012, 31(12): 2453-2464

[18] MoonT, OhJ. A study of optimal rock-cutting conditions for hard rock TBM using the discrete element method [J]. Rock Mechanics and Rock Engineering, 2012, 45(5): 837-849

[19] TanQ, XuZ-j, XiaY-m, ZhangKui. Numerical study on mode of breaking rock by TBM cutter in two cutting orders [J]. Journal of Central South University: Science and Technology, 2012, 43(3): 940-946

[20] HuoJ-z, SunW, GuoL, LiZ, ZhangXu. Numerical simulation of the rock fracture process induced by multi-disc-cutters and cutter spacing design [J]. Journal of Harbin Engineering University, 2012, 33(1): 96-99