Numerical simulation on rotordynamic characteristics of annular seal under uniform and non-uniform flows

Abstract

Currently, the flow field of annular seals disturbed by the circular whirl motion of rotors is usually solved using computational fluid dynamics (CFD) to evaluate the five rotordynamic coefficients. The simulations are based on the traditional quasi-steady method. In this work, an improved quasi-steady method along with the transient method was presented to compute the rotordynamic coefficients of a long seal. By comparisons with experimental data, the shortcomings of quasi-steady methods have been identified. Then, the effects of non-uniform incoming flow on seal dynamic coefficients were studied by transient simulations. Results indicate that the long seal has large cross stiffness k and direct mass M which are not good for rotor stability, while the transient method is more suitable for the long seal for its excellent performance in predicting M. When the incoming flow is non-uniform, the stiffness coefficients vary with the eccentric directions. Based on the rotordynamic coefficients under uniform incoming flow, the linearized fluid force formulas, which can consider the effects of non-uniform incoming flow, have been presented and can well explain the varying-stiffness phenomenon.

Keywords

long pump seal / rotordynamic coefficients / transient computational fluid dynamics (CFD) / dynamic mesh / non-uniform incoming flow

References

[1] ArghirM, FreneJ. Static and dynamic analysis of annular seals [C]//. Proceedings of ASME Fluids Engineering Division Summer Meeting 2006, 2006, New York, USA, ASME: 517526

[2] PingS-l, TanS-g, WuD-z, WangL-qin. Analysis on modeling rotor system with sidling bearing and ring seal by using FEM [C]//. Proceedings of the 4th International Symposium on Fluid Machinery and Fluid Engineering, 2009, Berlin, Heidelberg, Germany, Springer: 366370

[3] ChildsD WTurbomachinery rotordynamics: phenomena, modeling, and analysis [M], 1993, New York, John Wiley & Sons

[4] HirsG G. A bulk-flow theory for turbulence in lubricant films [J]. Journal of Tribology, 1973, 95(2): 137-145

[5] MarquetteO R, ChildsD W S, AndresL. Eccentricity effects on the rotordynamic coefficients of plain annular seals: Theory versus experiment [J]. Journal of Tribology, 1997, 119(3): 443-448

[6] NelsonC C, NguyenD T. Comparison of Hirs’ equation with Moody’s equation for determining rotordynamic coefficients of annular pressure seals [J]. Journal of Tribology, 1987, 109(1): 144-148

[7] SunD, YangJ-g, Guor, ZhangW-f, AiY-ting. A trigonometric series expansion based method for the research of static and dynamic characteristics of eccentric seals [J]. Journal of Mechanical Science and Technology, 2014, 28(6): 2111-2120

[8] GuptaM K, ChildsD W. Rotordynamic stability predictions for centrifugal compressors using a bulk-flow model to predict impeller shroud force and moment coefficients [J]. Journal of Engineering for Gas Turbines and Power, 2010, 132(9): 091402

[9] TamL T, PrzekwasA J, MuszynskaA, HendricksR C, BraunM J, MullenR L. Numerical and analytical study of fluid dynamic forces in seals and bearings [J]. Journal of Vibration, Acoustics, Stress, and Reliability in Design, 1988, 1103315-325

[10] HaT W, ChoeB S. Numerical prediction of rotordynamic coefficients for an annular-type plain-gas seal using 3D CFD analysis [J]. Journal of Mechanical Science and Technology, 2014, 28(2): 505-511

[11] ZhangM, WangX-f, XuS-l, WanX-li. Analysis of the stiffness of the incompressible seal in pump [J]. Journal of Harbin Engineering University, 2014, 35(3): 347-352

[12] UntaroiuA, HayrapetianV, UntaroiuC D, WoodH G, SchiavelloB, McguireJ. On the dynamic properties of pump liquid seals [J]. Journal of Fluids Engineering, 2013, 135(5): 051104

[13] GaoR, KirkG. CFD study on stepped and drum balance labyrinth seal [J]. Tribology Transactions, 2013, 564663-671

[14] MooreJ J, RansomD L, VianaF. Rotordynamic force prediction of centrifugal compressor impellers using computational fluid dynamics [J]. Journal of Engineering for Gas Turbines and Power, 2011, 133(4): 042504

[15] MooreJ J, PalazzoloA B. CFD comparison to 3D laser anemometer and rotordynamic force measurements for grooved liquid annular seals [J]. Journal of Tribology, 1999, 1212306-314

[16] YanX, LiJ, FengZ-ping. Investigations on the rotordynamic characteristics of a hole-pattern seal using transient CFD and periodic circular orbit model [J]. Journal of Vibration and Acoustics, 2011, 133(4): 041007

[17] YanX, HeK, LiJ, FengZ-ping. A generalized prediction method for rotordynamic coefficients of annular gas seals [J]. Journal of Engineering for Gas Turbines and Power, 2015, 1379092506

[18] NielsenK K, JønckK, UnderbakkeH. Hole-pattern and honeycomb seal rotordynamic forces: Validation of CFD-based prediction techniques [J]. Journal of Engineering for Gas Turbines and Power, 2012, 13412122505

[19] KanemoriY, IwatsuboT. Experimental study of dynamic fluid forces and moments for a long annular seal [J]. Journal of Tribology, 1992, 1144773-778

[20] ANSYS FLUENT 14.0 Theory Guide [CP/DK]. USA: ANSYS Inc., 2011.