Model test to investigate failure mechanism and loading characteristics of shallow-bias tunnels with small clear distance

Abstract

Based on the similarity theory, a tunnel excavation simulation testing system under typical unsymmetrical loading conditions was established. Using this system, the failure mechanism of surrounding rock of shallow-bias tunnels with small clear distance was analyzed along with the load characteristics. The results show that: 1) The failure process of surrounding rock of shallow-bias tunnels with small clear distance consists of structural and stratum deformation induced by tunnel excavation; Micro-fracture surfaces are formed in the tunnel surrounding rock and extend deep into the rock mass in a larger density; Tensile cracking occurs in shallow position on the deep-buried side, with shear slip in deep rock mass. In the meantime, rapid deformation and slip take place on the shallow-buried side until the surrounding rocks totally collapse. The production and development of micro-fracture surfaces in the tunnel surrounding rock and tensile cracking in the shallow position on the deep-buried side represent the key stages of failure. 2) The final failure mode is featured by an inverted conical fracture with tunnel arch as its top and the slope at tunnel entrance slope as its bottom. The range of failure on the deep-buried side is significantly larger than that on the shallow-buried side. Such difference becomes more prominent with the increasing bias angle. What distinguishes it from the "linear fracture surface" model is that the model proposed has a larger fracture angle on the two sides. Moreover, the bottom of the fracture is located at the springing line of tunnel arch. 3) The total vertical load increases with bias angle. Compared with the existing methods, the unsymmetrical loading effect in measurement is more prominent. At last, countermeasures are proposed according to the analysis results: during engineering process, 1) The surrounding rock mass on the deep-buried side should be reinforced apart from the tunnel surrounding rock for shallow-buried tunnels with small clear distance; moreover, the scope of consolidation should go beyond the midline of tunnel (along the direction of the top of slope) by 4 excavation spans of single tunnel. 2) It is necessary to modify the load value of shallow-bias tunnels with small clear distance.

Keywords

shallow-bias / tunnels with small spacing / failure mechanism / loading characteristics / model test

References

[1] GongJ-w, XiaC-c, LeiX-wen. Analysis of filed measurement and theoretical calculation on rock pressure in shallowburied twin tunnels with small spacing [J]. Chinese Journal of Rock Mechanics and Engineering, 2010, 29(2): 4139-4145

[2] YamaguchiI, YamazakiI, KiritaniY. Study of groundtunnel interactions of four shield tunnels driven in close proximity, in relation to design and construction of parallel shield tunnels [J]. Tunnelling and Underground Space Technology, 1998, 13: 289-304

[3] KooiC B, VerruijtA. Interaction of circular holes in an infinite elastic medium [J]. Tunnelling and Underground Space Technology, 2001, 16: 59-62

[4] FuJ-y, YangJ-s, YanL, AbbasS M. An analytical solution for deforming twin-parallel tunnels in an elastic half plane [J]. International Journal for Numerical and Analytical Methods in Geomechanics, 2015, 39(5): 524-538

[5] XieJ, LiuC-g, YuH-yong. Upper bound solutions of plastic limit analysis for the stability of two parallel circular tunnels [J]. Chinese Journal of Rock Mechanics and Engineering, 2006, 25(9): 1835-1841

[6] SolimanE, DuddeckH, AhensH. Two and three dimensional analysis of closely spaced double-tube tunnels [J]. Tunnelling and Underground Space Technology, 1993, 8(1): 13-18

[7] GalliG, GrimaldiA, LeonardiA. Three-dimensional modeling of tunnel excavation and lining[J]. Computers and Geotechnics, 2004, 31: 171-183

[8] NgC W W, LeeK M, TangD K W. Three-dimensional numerical investigations of new Austrian tunnelling method (NATM) twin tunnel interactions [J]. Canadian Geotechnical Journal, 2004, 41(3): 523

[9] ChuB L, HsuS C, ChangY L, LinY S. Mechanical behavior of a twin-tunnel in multi-layered formations [J]. Tunnelling and Underground Space Technology, 2007, 22: 351-362

[10] ChapmanD N, AhnS K, HuntD V L. Investigating ground movements caused by the construction of multiple tunnels in soft ground using laboratory model tests [J]. Canadian Geotechnical Journal, 2007, 44(6): 631-643

[11] ChapmanD N, AhnS K, HuntD V L, ChanA H C. The use of model tests to investigate the ground displacements associated with multiple tunnel construction in soil [J]. Tunnelling and Underground Space Technology, 2006, 21: 413-418

[12] YangX-l, SuiZ-rong. Numerical simulation of construction sequence for shallow embedded bias tunnels with small clear distance [J]. Journal of Central South University: Science and Technology, 2007, 38(4): 764-770

[13] KarmenF B, BorutP. Displacement analysis of tunnel support in soft rock around a shallow highway tunnel at Golovec [J]. Engineering Geology, 2004, 75: 89-106

[14] ChenJ-f, KangC-y, ShiZ-ming. Displacement monitoring of parallel closely spaced highway shield tunnels in Marine clay [J]. Marine Georesources & Geotechnology, 2015, 33(1): 45-50

[15] XiaoM-qing. Study on the rock pressure acting on shallow tunnels with small spacing [J]. Modern Tunnelling Technology, 2004, 41(3): 7-10

[16] ShuZ-l, LiuB-x, LiYue. Surrounding rock pressure analysis of neighbourhood tunnel under unsymmetrical pressure[J]. Chinese Journal of Underground Space and Engineering, 2007, 3(3): 430-433

[17] YangX-l, ZhangJ-h, JinQ-y, MaJ-qiu. Analytical solution to rock pressure acting on three shallow tunnels subjected to unsymmetrical loads [J]. Journal of Central South University, 2013, 20(2): 528-535

[18] ZhangH, ZhangZ-x, HuangH-w, DuJ-hong. Model test on mechanical behavior of two shallow-buried closelyspaced tunnels at different elevations under unsymmetrical load [J]. Journal of Tongji University: Natural Science, 2009, 37(2): 169-175

[19] LeiM-f, PengL-m, ShiC-h, WangL-c, LiuZ-chu. Model research on failure mechanism and lining stress characteristics of shallow buried tunnel under unsymmetrical pressure [J]. Journal of Central South University: Science and Technology, 2013, 44(8): 3316-3325

[20] LeiM-f, PengL-m, ShiC-hua. Model test to investigate the failure mechanisms and lining stress characteristics of shallow buried tunnels under unsymmetrical loading [J]. Tunnelling and Underground Space Technology, 2015, 46: 64-75