Establishment and application of service mapping model for proactive remanufacturing impeller

Abstract

Since the complex impeller structure and the difficult remanufacturing process may easily cause advance remanufacturing or excessive use, an optimized design method of impeller and service mapping model was presented for its proactive remanufacturing with setting up to explore the best remanufacturing time point in this work. Considering a certain model of long distance pipeline compressor impeller with the Basquin equation and the design method of impeller, the mathematical relationship between the changes of structure and life of the impeller was established. And the service mapping model between the structure and life was set up and simulated by ANSYS software. Thus, the service mapping model was applied to feedback the original design for proactive remanufacturing. In this work, the best proactive remanufacturing time point of impeller was analyzed with the service mapping model, and the structural parameter values could be optimized at this time point. Meanwhile, in the results of this simulation, it proves that the impeller under this optimization performance could satisfy the impeller operating demands. Therefore, comparing with the traditional optimization design method, the remanufacturing optimized design based on the service mapping model is feasible in proactive remanufacturing for sustainable development.

Keywords

impeller / proactive remanufacturing / remanufacturing time point / service mapping model

References

[1] XuB-shiTheory and technology of equipment remanufacturing engineering [M], 2007Harbin, ChinaNational Defense Industry Press

[2] SongS-x, LiuM, KeQ-d, LiuG-fu. Components optimization design for remanufacturing based on residual strength [J]. Journal of Mechanical Engineering, 2013, 49(9): 121-127

[3] JiangJ-p, LiangG-q, ZhangS-juan. Research on requirement analysis of aero engine turbine blade for proactive remanufacturing [J]. Aeronautical Manufacturing Technology, 2014, 1: 118-122

[4] LiuG-f, LiuT, KeQ-di. Time interval decision-making methods for proactive remanufacturing product based on game theory and neural network [J]. Journal of Mechanical Engineering, 2013, 49(7): 29-35

[5] WuC-w, GuanZ-q, GuoX-lin. Fatigue reliability analysis of blades of large centrifugal compressor [J]. Equipment Manufacturing Technology, 2008, 8: 1-3

[6] HiranoT, MizukiT, ToshiyukiH, MizukiT, HoshioT. Effect of double air injection on performance characteristics of centrifugal compressor [J]. Journal of Thermal Science, 2015, 24(1): 10-16

[7] NieD-f, ChenX-d, FanZ-c, WuQ-guo. Failure analysis of a slot-welded impeller of recycle hydrogen centrifugal compressor [J]. Engineering Failure Analysis, 2014, 42: 1-9

[8] MaH, DaiJ-s, MengL, WengB-chun. Imbalance response analysis on rotor systems for large-scale centrifugal compressors [J]. Chinese Journal of Construction Machinery, 2010, 8(2): 127-131

[9] GuanZ-q, SongY, YangS-h, LiuW-q, LvJ, Wangy, ChengG-dong. Analysis methods for static strength of centrifugal compressor impeller [J]. Journal of Dalian University of Technology, 2011, 51(2): 157-162

[10] AbrahamE. Experimental and numerical investigation of the performance of a 240 kW centrifugal compressor with different diffusers [J]. Experimental Thermal and Fluid Science, 2003, 28(1): 55-72

[11] SivaprasadS, NarasaiahN, DasS K, DasG, TarafderS, GuptaK K, GhoshR H. Investigation on the failure of air compressor [J]. Engineering Failure Analysis, 2010, 17: 150-157

[12] SivaprasadS, NaransaiahN, DasS K. Fatigue failure of a centrifugal compressor [J]. Engineering Failure Analysis, 2007, 14: 1313-1321

[13] ShuL-s, CaoH-j, XuLei. 3D characteristic modeling method and application for remanufactured impeller of centrifugal compressor [J]. Journal of Mechanical Engineering, 2014, 50(3): 184-190

[14] LiuTaoResearch on time interval decision-making and control methods for active remanufacturing [D], 2012HefeiHefei University of Technology

[15] ChenX-deVane equation pump, fan, compressor (principle, design, operation, strength) [M], 2011BeijingChina Machine Press

[16] VyasN S, SidhartH, RaoJ S. Dynamic stress analysis and a fracture mechanics approach to life prediction of turbine blades [J]. Mechanism & Machine Theory, 1997, 32: 511-527

[17] LuoJ, XiG, GuoC-qing. Numerical analysis of stress and structure optimization for centrifugal impeller [J]. Fluid Machinery, 2004, 32(11): 8-10

[18] CaiZ-l, HanH-y, PengXin. 3D stress distribution of rotate impeller and its improvement [J]. Journal Huazhong University of Science & Technology: Nature Science Edition, 2003, 31(12): 81-83

[19] HanW-b, CaiB-q, HanX-dongConcept of equilibrium stress in a particle [EB/OL], 2006