Forward modeling for “earth-ionosphere” mode electromagnetic field
Di-quan Li , Wei Xie , Qing-yun Di , Miao-yue Wang
Journal of Central South University ›› 2016, Vol. 23 ›› Issue (9) : 2305 -2313.
Forward modeling for “earth-ionosphere” mode electromagnetic field
A fixed artificial source (greater than 200 kW) was used and the source location was selected at a high resistivity region to ensure high emission efficiency. Some publications used the “earth-ionosphere" mode in modeling the electromagnetic (EM) fields with the offset up to a thousand kilometer, and such EM fields still have a signal/noise ratio of 10–20 dB. This means that a new EM method with fixed source is feasible, but in their calculation, the displacement in air was neglected. In this work, some three-layer modeling results were presented to illustrate the basic EM fields’ characteristics in the near, far and waveguide areas under “earth-ionosphere” mode, and a standard is given to distinguish the boundary of near, far and waveguide areas. Due to the influence of the ionosphere and displacement current in the air, the “earth-ionosphere” mode EM fields have an extra waveguide zone, where the fields’ behavior is very different from that of the far field zone.
earth-ionosphere mode / large power / large offset / electromagnetic field / forward modeling
| [1] |
|
| [2] |
|
| [3] |
|
| [4] |
|
| [5] |
|
| [6] |
|
| [7] |
|
| [8] |
|
| [9] |
|
| [10] |
|
| [11] |
|
| [12] |
|
| [13] |
|
| [14] |
|
| [15] |
|
| [16] |
|
| [17] |
|
| [18] |
|
| [19] |
|
| [20] |
|
| [21] |
|
| [22] |
|
| [23] |
|
| [24] |
|
| [25] |
|
| [26] |
|
| [27] |
|
| [28] |
|
| [29] |
|
| [30] |
|
| [31] |
|
| [32] |
|
| [33] |
|
| [34] |
|
| [35] |
|
| [36] |
|
| [37] |
|
| [38] |
|
/
| 〈 |
|
〉 |