Temperature control for thermal treatment of aluminum alloy in a large-scale vertical quench furnace

Abstract

The temperature control of the large-scale vertical quench furnace is very difficult due to its huge volume and complex thermal exchanges. To meet the technical requirement of the quenching process, a temperature control system which integrates temperature calibration and temperature uniformity control is developed for the thermal treatment of aluminum alloy workpieces in the large-scale vertical quench furnace. To obtain the aluminum alloy workpiece temperature, an air heat transfer model is newly established to describe the temperature gradient distribution so that the immeasurable workpiece temperature can be calibrated from the available thermocouple temperature. To satisfy the uniformity control of the furnace temperature, a second order partial differential equation (PDE) is derived to describe the thermal dynamics inside the vertical quench furnace. Based on the PDE, a decoupling matrix is constructed to solve the coupling issue and decouple the heating process into multiple independent heating subsystems. Then, using the expert control rule to find a compromise of temperature rising time and overshoot during the quenching process. The developed temperature control system has been successfully applied to a 31 m large-scale vertical quench furnace, and the industrial running results show the significant improvement of the temperature uniformity, lower overshoot and shortened processing time.

Keywords

large-scale vertical quench furnace / temperature calibration / thermal dynamic model / decoupling control

References

[1] JiangS-h, GuiW-h, YangC-hua. Vertical quench furnace Hammerstein fault calibrating model based on least squares support vector machine and its application [C]. In Proc Int CCDC. Guilin: IEEE, 2009203-207

[2] ZhouX, YuS-y, LiangL-quan. Multivariable temperature measurement and control system research of 31m vertical quench furnace [J]. Journal of Mini-Micro Systems, 2005, 26(2): 310-314

[3] HanS H, ChuangD, HuhC. Efficiency analysis of radiative slab heating in a walking-beam-type reheating furnace [J]. Journal of Energy, 2011, 36(2): 1265-1272

[4] TanC, JenkinsJ, WardJ. Zone modelling of the thermal performances of a large-scale bloom reheating furnace [J]. Journal of Applied Thermal Engineering, 2013, 50(1): 1111-1118

[5] OrzylowskiM, KaluzniackiT, RudolfZ, NowickiG. Precise temperature control for measurement purpose [C]. Proc of the 16th IEEE Instrumentation and Measurement Technology Conference. Venice, Italy: IEEE, 199916-21

[6] AggelogiannakiE, SarimveisH, KoubogiannisD. Model calibrative temperature control in long ducts by means of a neural network approximation tool [J]. Applied Thermal Engineering, 2007, 27(14/15): 2363-2369

[7] CaoL-l, LiD-z, ZhangC-y, WuH-yan. Control and modeling of temperature distribution in a tubular polymerization process [J]. Computers and Chemical Engineering, 2007, 31(11): 1516-1524

[8] ChaiT-y, DingJ-l, WuF-hua. Hybrid intelligent control for optimal operation of shaft furnace roasting process [J]. Control Engineering Practice, 2011, 19(3): 264-275

[9] SteinboeckA, WildS, KugiA. Nonlinear model predictive control of a continuous slab reheating furnace [J]. Control Engineering Practice, 2013, 21(4): 495-508

[10] ZhouX, YuS-y, LiangL-quan. Temperature measurement of large-scaled vertical quench furnace based on temperature field [J]. Journal of Control Theory and Applications, 2004, 2(4): 401-405

[11] HeJ-j, LiuY-q, YuS-y, GuiW-hua. Neural adaptive PSD decoupling controller and its application in three-phase electrode adjusting system of submerged arc furnace [J]. Journal of Central South University Technology, 2013, 20(2): 405-412

[12] DingY-s, LiuBao. An intelligent bi-cooperative decoupling control approach based on modulation mechanism of internal environment in body [J]. IEEE Trans on Control Systems Technology, 2011, 19(3): 692-698

[13] GhoshA, DasS K. Open-loop decoupling of MIMO plants [J]. IEEE Trans on Automatic Control, 2009, 54(8): 1977-1981

[14] WenD-du. Decoupling control of electric heating furnace temperature based on DRNN neural network [C]. Int Conference on Electronic Computer Technology. Kuala Lumpur: ECT, 2010261-264

[15] LiJ-y, MengX-feng. Temperature decoupling control of double-level air flow field dynamic vacuum system based on neural network and calibration principle [J]. Applications of Artificial Intelligence, 2013, 26(4): 1237-1245

[16] ReddyJ N, GartlingD KThe finite element method in heat transfer and fluid dynamics [M], 2010FloridaCRC

[17] ShenL, HeJ-j, YangC-h, GuiW-h, XuH-lei. Temperature uniformity control of large-scale vertical quench furnaces for aluminum alloy thermal treatment [J]. IEEE Trans on Control Systems Technology, 2015, 99: 1-10

[18] KwonY W, BangHThe finite element method using matlab [M], 2000New YorkTaylor & Francis Group

[19] ZhouX, YuS-y, HeJ-jun. Dynamically decoupling control algorithm of temperature DPS in large-scale vertical quench furnace [J]. Journal of Central South University Technology: Scieace and Technolagy, 2007, 38(3): 533-539