Viscoelastic micromechanical model for dynamic modulus prediction of asphalt concrete with interface effects

Man-sheng Dong , Yang-ming Gao , Ling-lin Li , Li-na Wang , Zhi-bin Sun

Journal of Central South University ›› 2016, Vol. 23 ›› Issue (4) : 926 -933.

PDF
Journal of Central South University ›› 2016, Vol. 23 ›› Issue (4) : 926 -933. DOI: 10.1007/s11771-016-3140-y
Geological, Civil, Energy and Traffic Engineering

Viscoelastic micromechanical model for dynamic modulus prediction of asphalt concrete with interface effects

Author information +
History +
PDF

Abstract

A viscoelastic micromechanical model is presented to predict the dynamic modulus of asphalt concrete (AC) and investigate the effect of imperfect interface between asphalt mastic and aggregates on the overall viscoelastic characteristics of AC. The linear spring layer model is introduced to simulate the interface imperfection. Based on the effective medium theory, the viscoelastic micromechanical model is developed by two equivalence processes. The present prediction is compared with available experimental data to verify the developed framework. It is found that the proposed model has the capability to predict the dynamic modulus of AC. Interface effect on the dynamic modulus of AC is discussed using the developed model. It is shown that the interfacial bonding strength has a significant influence on the global mechanical performance of AC, and that continued improvement in surface functionalization is necessary to realize the full potential of aggregates reinforcement.

Keywords

asphalt concrete / imperfect interface / rheological properties / micromechanics

Cite this article

Download citation ▾
Man-sheng Dong, Yang-ming Gao, Ling-lin Li, Li-na Wang, Zhi-bin Sun. Viscoelastic micromechanical model for dynamic modulus prediction of asphalt concrete with interface effects. Journal of Central South University, 2016, 23(4): 926-933 DOI:10.1007/s11771-016-3140-y

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

AndreiD, WitczakM W, MirzaM WDevelopment of a revised predictive model for the dynamic (complex) modulus of asphalt mixtures [R], 1999

[2]

National Cooperative Highway Research Program.Simple performance test for superpave mix design [R, 2003

[3]

BonaquistRSimple performance tester for superpave mix design [K], 2003

[4]

ShuX, HuangB-shan. Micromechanics-based dynamic modulus prediction of polymeric asphalt concrete mixtures [J]. Composites Part B: Engineering, 2008, 39: 704-713

[5]

HuangB-s, AsceM, ShuX, LiG-q, ChenL-shang. Analytical modeling of three-layered HMA mixtures [J]. International Journal of Geomechanics, 2007, 7: 140-148

[6]

DaiQ-li. Two-and three-dimensional micromechanical viscoelastic finite element modeling of stone-based materials with X-ray computed tomography images [J]. Construction and building Materials, 2011, 25: 1102-1114

[7]

ChenY-k, YuJ-m, ZhangX-ning. Micromechanical analysis of damage evolution in splitting test of asphalt mixtures [J]. Journal of Central South University of Technology, 2010, 17: 628-634

[8]

ChenJ, WangL-b, HuangX-ming. Micromechanical modeling of asphalt concrete fracture using a user-defined three-dimensional discrete element method [J]. Journal of Central South University, 2012, 19: 3595-3602

[9]

YuH-n, ShenS-hui. A micromechanical based three-dimensional DEM approach to characterize the complex modulus of asphalt mixtures [J]. Construction and building Materials, 2013, 38: 1089-1096

[10]

DondiG, VignaliV, PettinariM, MazzottaF, SimoneA, SangiorgiC. Modeling the DSR complex shear modulus of asphalt binder using 3D discrete element approach [J]. Construction and building Materials, 2014, 54: 236-246

[11]

ZhuX-y, ChenLong. Numerical prediction of elastic modulus of asphalt concrete with imperfect bonding [J]. Construction and building Materials, 2012, 35: 45-51

[12]

ZhuX-y, WangX-f, YuYing. Micromechanical creep models for asphalt-based multi-phase particle-reinforced composites with viscoelastic imperfect interface [J]. International Journal of Engineering Science, 2014, 76: 34-46

[13]

BenvenisteY. The effective mechanical behavior of composite materials with imperfect contact between the constituents [J]. Mechanics of Materials, 1985, 4: 197-208

[14]

HashinZ. Thermoelastic properties of fiber composites with imperfect interface [J]. Mechanics of Materials, 1990, 8: 333-348

[15]

QuJ-min. Eshelby tensor for an elastic inclusion with slightly weakened interface [J. Journal of Applied Mechanics, 1993, 60: 1048-1050

[16]

QuJ-min. The effect of slightly weakened interfaces on the overall elastic properties of composite materials [J]. Mechanics of Materials, 1993, 14: 269-281

[17]

RizzoF J, ShippyD J. An application of the correspondence principle of linear viscoelasticity theory [J]. SIAM Journal on Applied Mathematics, 1971, 21: 321-330

[18]

SimW J, KwakB M. Linear viscoelastic analysis in times domain by boundary element method [J]. Computers & Structures, 1988, 29: 531-537

[19]

TschoeglN WThe phenomenological theory of linear viscoelastic behavior [M], 1989BerlinSpringer

[20]

KimY R, LittleD N. Linear viscoelastic analysis of asphalt mastics [J]. Journal of Materials in Civil Engineering, 2004, 16: 122-132

[21]

ShuX, HuangB-shan. Dynamic modulus prediction of HMA mixtures based on the viscoelastic micromechanical model [J]. Journal of Materials in Civil Engineering, 2008, 20: 530-538

[22]

PanY, WengG J, MeguidS A, BaoW S, ZhuZ H, HamoudaA M S. Interface effects on the viscoelastic characteristics of carbon nanotube polymer matrix composites [J]. Mechanics of Materials, 2013, 58: 1-11

[23]

EshelbyJ D. The determination of the elastic field of an ellipsoidal inclusion, and related problems [J]. Proceedings of the Royal Society of London Series A: Mathematical and Physical Sciences, 1957, 241: 376-396

[24]

ChristensenR MMechanics of composite materials [M], 1979New YorkWiley

[25]

MoriT, TanakaK. Average stress in matrix and average elastic energy of materials with misfitting inclusions [J]. Acta Metallurgica, 1973, 21(5): 571-574

[26]

QuJ-m, CherkaouiMFundamentals of micromechanics of solids [M], 2006New JerseyJohn Wiley & Sons, Inc

[27]

LiG-q, LiY-q, MetcalfJ B, PangS-seng. Elastic modulus prediction of asphalt concrete [J]. Journal of Materials in Civil Engineering, 1999, 11: 236-241

[28]

AndersonD A, GoetzW H. Mechanical Behavior and reinforcement of Mineral Filler-Asphalt Mixtures [J]. Journal of the Association of Asphalt Paving Technologists, 1973, 42: 37-66

[29]

ButtlarW G, BozkurtD, Al-KhateebG G, WaldhoffA S. Understanding asphalt mastic behavior through micromechanics [J]. Transportation Research Record: Journal of the Transportation Board, 1999, 1681: 157-169

[30]

LiY-q, MetcalfJ B. Two-step approach to prediction of asphalt concrete modulus from two-phase micromechanical models [J]. Journal of Materials in Civil Engineering, 2005, 17: 407-415

[31]

YouZ, ButtlarW G. Micromechanical modeling approach to predict compressive dynamic moduli of asphalt mixture using the distinct element method [J]. Transportation Research Record: Journal of the Transportation Research Board, 2006, 1970(1): 73-83

[32]

ZhuX-y, YangZ-x, GuoX-m, ChenW-qiu. Modulus prediction of asphalt concrete with imperfect bonding between aggregate-asphalt mastic [J]. Composites: Part B, 2011, 42: 1404-1411

[33]

LiuY, DaiQ-l, YouZ-ping. Viscoelastic model for discrete element simulation of asphalt mixtures [J]. Journal of Engineering Mechanics, 2009, 135: 324-333

AI Summary AI Mindmap
PDF

131

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/