Aerodynamic drag reduction of heavy vehicles using append devices by CFD analysis

Abstract

Improving vehicle fuel consumption, performance and aerodynamic efficiency by drag reduction especially in heavy vehicles is one of the indispensable issues of automotive industry. In this work, the effects of adding append devices like deflector and cab vane corner on heavy commercial vehicle drag reduction were investigated. For this purpose, the vehicle body structure was modeled with various supplementary parts at the first stage. Then, computational fluid dynamic (CFD) analysis was utilized for each case to enhance the optimal aerodynamic structure at different longitudinal speeds for heavy commercial vehicles. The results show that the most effective supplementary part is deflector, and by adding this part, the drag coefficient is decreased considerably at an optimum angle. By adding two cab vane corners at both frontal edges of cab, a significant drag reduction is noticed. Back vanes and base flaps are simple plates which can be added at the top and side end of container and at the bottom with specific angle respectively to direct the flow and prevent the turbulence. Through the analysis of airflow and pressure distribution, the results reveal that the cab vane reduces fuel consumption and drag coefficient by up to 20 % receptively using proper deflector angle. Finally, by adding all supplementary parts at their optimized positions, 41% drag reduction is obtained compared to the simple model.

Keywords

aerodynamics / computational fluid dynamic (CFD) / append device / drag reduction / fuel consumption

References

[1] HowellJ P. Aerodynamic drag reduction for low carbon vehicles [M]. Sustainable Vehicle Technologies, Driving the Green Agenda, 2012WoodheadElsevier publication145-154

[2] ChengS Y, TsubokuraM, OkadaY, NouzawaT, NakashimaT, DohD H. Aerodynamic stability of road vehicles in dynamic pitching motion [J]. Journal of Wind Engineering and Industrial Aerodynamics, 2013, 122: 146-156

[3] Mahmoodi-KM, DavoodabadiI V V, AfkarA. Stress and dynamic analysis of optimized trailer chassis [J]. Technical Gazette, 2014, 21: 599-608

[4] KhaledM, ElhageH, HarambatF, PeerhossainiH. Some innovative concepts for car drag reduction: A parametric analysis of aerodynamic forces on a simplified body [J]. Journal of Wind Engineering and Industrial Aerodynamics, 2012, 107/108: 36-47

[5] PevittC, ChowduryH, MoriaandH, AlamF. A computational simulation of aerodynamic drag reductions for heavy commercial vehicles [C]. 18th Australasian Fluid Mechanics Conference Launceston, 2012191-194

[6] CooperK R. Commercial vehicle aerodynamic drag reduction: Historical perspective as a guide in the aerodynamics of heavy vehicles: Trucks, buses, and trains [M]. Lecture Notes in Applied and Computational Mechanics, 2004Berlin, HeidelbergSpringer9-28

[7] OdhamsA M C. Factors influencing the energy consumption of road freight transport [J]. Journal of Mechanical Engineering Science, 2010, 224: 1995-2010

[8] KassimZ M, FilipponeA. Fuel savings on a heavy vehicle via aerodynamic drag reduction [J]. Transportation Research Part D: Transport and Environment, 2010, 15: 275-284

[9] HyamsG D, SreenivasK, PankajakshanR, NicholsS, BrileyR D, WhitfieldD L. Computational simulation of model and full scale Class 8 trucks with drag reduction devices [J]. Computers & Fluids, 2011, 41: 27-40

[10] SCHOON R E. On-road evaluation of devices to reduce heavy truck aerodynamic drag [R]. SAE Technical Paper, No. 2007-01-4294.

[11] FilipponeA, KassimZ M. Realistic fuel saving on a heavy vehicle via aerodynamic drag reduction [J]. Transportation Research Part D: Transport and Environment, 2010, 15: 275-284

[12] DominyR G, CorinR J, HeL. A CFD investigation into the transient aerodynamic forces on overtaking road vehicle models [J]. Journal of Wind Engineering and Industrial Aerodynamics, 2008, 96: 1390-1411

[13] Mahmoodi-KM, JavanshirI, AsadiK, AfkarA, PaykaniA. Optimization of suspension system of off-road vehicle for vehicle performance improvement [J]. Journal of Central South University, 2013, 20: 902-910

[14] MashadiB, Mahmoodi-KM, KakaeA H, HosseiniR. Vehicle path following in the presence of driver inputs [J]. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 2013, 227(2): 115-132

[15] RocchiD, RosaL, SabbioniE, SbrosiM, BelloliM. A numerical-experimental methodology for simulating the aerodynamic forces acting on a moving vehicle passing through the wake of a bridge tower under cross wind [J]. Journal of Wind Engineering and Industrial Aerodynamics, 2012, 104/105/106: 256-265

[16] McCALLEN R, FLOWERS D, DUNN T, OWENS J, BROWAND F, HAMMACHE M, LEONARD A, BRADY M, SALARI K, RUTLEDGE W, ROSS R, STORMS B, HEINECK T, DRIVER D, BELL J, WALKER S, ZILLIAC G. Aerodynamic drag of heavy vehicles (class 7-8): Simulation and benchmarking [R]. SAE Technical Paper, No. 2000-01-2209.

[17] ENGLAR R J. Advanced aerodynamic devices to improve the performance, economics, handling and safety of heavy vehicles [R]. SAE Technical Paper, No. 2001-01-2072.

[18] MiralbesR, CastejonL. Aerodynamic analysis of some boat tails for heavy vehicles, [J]. International Journal of Heavy Vehicle Systems, 2012, 19: 115-12

[19] H’KanssonC, LenngrenM JCFD analysis of aerodynamic trailer devices for drag reduction of heavy duty trucks [D], 2010Göteborg, SwedenChalmers University of Technology

[20] SelenbasB, GunesH, GocmenK. An aerodynamic design and optimization of a heavy truck for drag reduction [C]. Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis ESDA2010, 2010121-129

[21] YangX, MaZ. Drag reduction of a truck using append devices and optimization, parallel computational fluid dynamics [M]. Communications in Computer and Information Science, 2014Berlin, HeidelbergSpringer332-343

[22] MccallenR, BrowandF, RossJ. The aerodynamics of heavy vehicles ii: trucks, buses, and trains [M]. Lecture Notes in Applied and Computational Mechanics, 20093-13

[23] Montazeri-GhM, Mahmoodi-KM. Development of a new power management strategy for power split hybrid electric vehicles [J]. Transportation Research Part D: Transport and Environment, 2015, 37: 79-96