Interpretation of electrochemical impedance spectroscopy (EIS) circuit model for soils

Abstract

Based on three different kinds of conductive paths in microstructure of soil and theory of electrochemical impedance spectroscopy (EIS), an integrated equivalent circuit model and impedance formula for soils were proposed, which contain 6 meaningful resistance and reactance parameters. Considering the conductive properties of soils and dispersion effects, mathematical equations for impedance under various circuit models were deduced and studied. The mathematical expression presents two semicircles for theoretical EIS Nyquist spectrum, in which the center of one semicircle is degraded to simply the equivalent model. Based on the measured parameters of EIS Nyquist spectrum, meaningful soil parameters can easily be determined. Additionally, EIS was used to investigate the soil properties with different water contents along with the mathematical relationships and mechanism between the physical parameters and water content. Magnitude of the impedance decreases with the increase of testing frequency and water content for Bode graphs. The proposed model would help us to better understand the soil microstructure and properties and offer more reasonable explanations for EIS spectra.

Keywords

soil / electrochemical impedance spectroscopy (EIS) / equivalent circuit / impedance / water content

References

[1] IslamT, MustafaM M, SanusiH. Modeling of electrical resistivity and maximum dry density in soil compaction measurement [J]. Environmental Earth Sciences, 2012, 67(5): 1299-1305

[2] HanL-h, LiuS-y, DuY-jun. New method for testing contaminated soil—Electrical resistivity method [J]. Journal of Geotechnical Engineering, 2006, 28(8): 1028-1032

[3] WangK, ZhaoM J. Study on electrical resistivity characteristics and influencing factors of soil-stone composite medium [J]. Advanced Materials Research, 2003, 726/731: 3877-3882

[4] ZhouM, WangJ-g, HuangS-b, DouP, ZhangL-qiang. Experimental investigation on influencing factors in soil resistivity measurement [J]. Rock and soil Mechanics, 2011, 32(11): 3269-3275

[5] JoseA R, RogerA E, VagnerR. Use of electrical resistivity to identify collapsible soils in Brazil [J]. Bulletin of Engineering Geology and the Environment, 2011, 70(2): 299-307

[6] CaoC-n, ZhangJ-QingAn introduction to electrochemical impedance spectroscopy [M], 2002BeijingScience Press

[7] AndrzejL. Electrochemical impedance spectroscopy and its applications—modern aspects of electrochemistry [M]. New York: Kluwer Academic Publishers, 1999

[8] YanM L, MiaoL C, CuiY. Electrical resistivity features of compacted expansive soils [J]. Marine Geo-resources & Geo-technology, 2012, 30(2): 167-179

[9] CuiX-l, JiangZ-yu. The plot formats and applications of electrochemical impedance spectroscopy [J]. Journal of Shanghai Teachers University: Natural Sciences, 2001, 30(4): 53-61

[10] RoweR K, ShangJ Q, XieY. Effect of permeating solution on complex permittivity of compact clay [J]. Journal of Canadian Geotechnical, 2002, 39(5): 1016-1025

[11] SonY H. Assessment of concentration in contaminated soil by potentially toxic elements using electrical properties [J]. Environmental Monitoring and Assessment, 2011, 176(4): 1-11

[12] YangZ-h, YinY-l, ShiM-lun. Study of AC impedance spectroscopy for alkali-silica reaction and its rational application [J]. Journal of Building Materials, 2007, 10(1): 48-54

[13] MartinezI, AndradeC. Polarization resistance measurements of bars embedded in concrete with different chloride concentrations: EIS and DC comparison [J]. Materials and Corrosion, 2011, 62(10): 932-942

[14] DongX Q, YangG H, BaiX H. The AC impedance characteristics of soil with different water content [J]. Advanced Materials Research, 2011, 287/290: 815-818

[15] CarmotaA, FrateurI, ZannaS. Corrosion mechanisms of steel concrete moulds in contact with a demoulding agent studied by EIS and XPS [J]. Corrosion Science, 2003, 45(11): 2513-2524

[16] YeC Q, HuR G, DongS G. EIS analysis on chloride-induced corrosion behavior of reinforcement steel in simulated carbonated concrete pore solutions [J]. Journal of Electro-analytical Chemistry, 2013, 688(1): 275-281

[17] EvgenjjB, MacdonaldJ RImpedance spectroscopy theory experiment and applications [M], 2005HobokenJohn Wiley & Sons

[18] ShiM-lun. Concrete impedance spectroscopy [M]. Beijing: China Railway Press, 2003

[19] ShiM-lunAC impedance spectroscopy principles and application [M], 2001BeijingNational Defend Industry Press

[20] HeH-z, ChenZ-y, ShiM-lun. Study of the durability of reinforced concrete under the long-term intrusion of seawater by AC impedance spectroscopy [J]. Journal of Building Materials, 2000, 3(2): 187-188

[21] LiuY-j, JiangQ, ZhaoC-z, LiuT-t, XuX-peng. Application of AC impedance spectrum in study of concrete protective coatings [J]. Concrete, 2007, 1: 8-10

[22] ZhangY, ShiM-lun. Study of the hydration process of cement-based materials by AC impedance technique [J]. Journal of Building Materials, 2007, 3(2): 109-122

[23] SongG L. Equivalent circuit model for AC electrochemical impedance spectroscopy of concrete [J]. Cement and Concrete Research, 2000, 30(8): 1723

[24] GuP, XieP, BeaudoinJ J. Microstructural characterization of the transition zone in cement systems by means of A.C. impedance spectroscopy [J]. Cement and Concrete Research, 1993, 23(3): 581-591

[25] GuP, XieP, BeaudoinJ J. AC impedance spectroscopy (I): A new equivalent circuit model for hydrated portland cement paste [J]. Cement and Concrete Research, 1992, 22(5): 833-840

[26] GuP, XieP, BeaudoinJ J. AC impedance spectroscopy (II): Microstructural characterization of hydrating cement-silica fume systems [J]. Cement and Concrete Research, 1993, 23(1): 157-168

[27] CruzJ M, FitaI C, SorianoL, PayaJ, BorracheroM V. The use of electrical impedance spectroscopy for monitoring the hydration products of Portland cement mortars with high percentage of pozzolans [J]. Cement and Concrete Research, 2013, 50(8): 51-61

[28] KeddamM, TakenoutiH. Impedance measurements on cement paste [J]. Cement and Concrete Research, 1997, 27(8): 1191-1201

[29] CabezaM, KeddamM, NovoaX R, SanchezI, TakenoutiH. Impedance spectroscopy to characterize the pore structure during the hardening process of Portland cement paste [J]. Electrochimica Acta, 2006, 51(8): 1831-1841

[30] AndradeC, BlancoV M, CollazoA, KeddamM, NovoaX R. Cement paste hardening process studied by impedance spectroscopy [J]. Electrochimica Acta, 1999, 44(24): 4313-4318

[31] MossG M, ChristensenB J, MasonT O. Microstructural analysis of young cement pastes using impedance spectroscopy during pore solution exchange [J]. Advanced Cement Based Materials, 1996, 4(2): 68-75

[32] DeepakR, NarayananN. An electrical impedance investigation into the chloride ion transport resistance of alkali silicate powder activated slag concretes [J]. Cement and Concrete Composites, 2013, 44(11): 58-68

[33] MccarterW J, BrousseauR. The A.C. response of hardened cement paste [J]. Cement and Concrete Research, 1990, 20(6): 891-900

[34] CabezaM, MerinoP, MirandaA. Impedance spectroscopy study of hardened Portland cement paste [J]. Cement and Concrete Research, 2002, 32(1): 881

[35] ZhangY-l, ZhangZ-l, ShiM-lun. Diffusivity of chloride ion in concrete and its electrochemical measuring method [J]. Water Resources and Hydropower Engineering, 2005, 36(7): 49-51

[36] XuZ-zhi. Development in electrochemistry of cement and concrete science AC impedance spectroscopy theory [J]. Journal of Ceramic Society, 1994, 22(2): 173-180

[37] ZuoR-hui. New methods of structure and properties of cement concrete-AC impedance spectroscopy [J]. Science and Technology of Overseas Building Materials, 2005, 26(1): 19-21

[38] HuJ-c, WangH-f, SunX-m, HeM-chao. Study on AC impedance of rocks [J]. Chinese Journal of Rock Mechanics and Engineering, 2006, 25(9): 1898-1903

[39] DongX-q, YangG-hui. The AC impedance characteristics of cemented soil at early stage [J]. Journal of Taiyuan University of Technology, 2012, 43(1): 60-62

[40] HuJ-c, WangH-f, SunX-ming. Impedance spectroscopy and application to test the micro crack of rock [J]. Journal of Geotechnical Engineering, 2007, 29(8): 853-856

[41] GB/T 50123—1999.Chinese standard for soil test methods [S], 2008BeijingChina Planning Press