A new adding method of foaming agent used for foam dust suppression in underground coal mines

Abstract

To realize a stable addition of foaming agent used for foam technology, a new adding method using the jet cavitation was introduced, and its performance was investigated experimentally under different operating conditions. Experimental results show that the bubble region in the jet device has a constant vapor pressure, which creates a good condition for liquid absorption, while it shrinks with increasing outlet pressure. The liquid absorption amount keeps unchanged when the outlet pressure is lower than a critical value. The critical outlet pressure increases by 40% with decreasing cavitation absorption amount, which is especially suitable for mini-flow quantitative addition of foaming agent used for foam dust suppression. Its effectiveness on suppressing mine dust was evaluated in a heading face of underground coal mines. Field application indicates that the reliable and simple foaming system adopting the new adding method makes a marked dust suppression effect. The working environment of heading face is significantly improved, ensuring the safe tunneling and personal security.

Keywords

coal mines / dust suppression / jet / cavitation / absorption amount / outlet pressure

References

[1] ToranoJ, TornoS, MenendezM, GentM. Auxiliary ventilation in mining roadways driven with roadheaders: Validated CFD modelling of dust behavior [J]. Tunnelling and Underground Space Technology, 2011, 26(1): 201-210

[2] RenT X, PlushB, AzizN. Dust controls and monitoring practices on Australian longwalls [J]. Procedia Engineering, 2011, 26: 1417-1429

[3] WangD-mingMine ventilation and safety [M], 2007XuzhouChina University of Mining and Technology Press97-110

[4] WuC, GuD-sheng. Fault tree analysis of dust suppression mechanism in a spray system with wetting agent [J]. Journal of Central South University of Technology, 2000, 7(3): 117-123

[5] WuC, OuJ-c, ZhouBo. Coupling of anionic wetting agents to dust of sulfide ores by dropping liquid method [J]. Journal of Central South University of Technology, 2005, 12(6): 737-741

[6] RenW-x, WangD-m, GuoQ, ZuoB-zhao. Application of foam technology for dust control in underground coal mine [J]. International Journal of Mining Science and Technology, 2014, 24(1): 13-16

[7] PageS J, VolkweinJ C. Foams for dust control [J]. Engineering and Mining Journal, 1986, 187(10): 50-54

[8] U.S. Bureau of Mines (USBM). Novel foam application lowers longwall dust [M]. Pittsburgh: U.S. Department of the Interior, Bureau of Mines, 1989: 1-2.

[9] WangH-t, WangD-m, TangY, QinB-t, XinH-hui. Experimental investigation of the performance of a novel foam generator for dust suppression in underground coal mines [J]. Advanced Powder Technology, 2014, 25(3): 1053-1059

[10] LuX-x, WangD-m, ShenW, WangH-t, ZhuC-b, LiuJ-an. Experimental investigation of the pressure gradient of a new spiral mesh foam generator [J]. Process Safety and Environmental Protection, 2015, 94: 44-54

[11] RenW-xingResearch on the theory and technology for dust control by foam in underground coal mines [M], 2013XuzhouChina University of Mining and Technology Press89-96

[12] LuX-x, WangD-m, ShenW, CaoKai. A new design of double-stage parallel adding equipment used for dust suppression in underground coal mines [J]. Arabian Journal for Science and Engineering, 2014, 39(11): 8319-8330

[13] LiH-a, ShiH-he. Application of hydraulic mixing metering pump used for chemical dust suppression in coal mines [J]. Zhongzhou Coal, 1990, 2: 14-23

[14] LuH-qiJet technology theory and application [M], 2004WuhanWuhan University Press1-13

[15] CunninghamR G, HansenA G, NaT Y. Jet pump cavitation [J]. Journal of Fluids Engineering, 1970, 92(3): 483-492

[16] LuX-x, WangD-m, ShenW, ZhuC-bing. Experimental investigation of the propagation characteristics of an interface wave in a jet pump under cavitation condition [J]. Experimental Thermal and Fluid Science, 2015, 63: 74-83

[17] GhassemiH, FasihH F. Application of small size cavitating venturi as flow controller and flow meter [J]. Flow Measurement and Instrumentation, 2006, 22(5): 406-412

[18] AbediniA E, AshrafizadeA, KarimiH M. Experimental performance evaluation of a cavitating venturi [J]. Arabian Journal for Science and Engineering, 2014, 39(2): 1375-1380

[19] AbdulazizA M. Performance and image analysis of a cavitating process in a small type venturi [J]. Experimental Thermal and Fluid Science, 2014, 53: 40-48

[20] UlasA. Passive flow control in liquid-propellant rocket engines with cavitating venturi [J]. Flow Measurement and Instrumentation, 2006, 17(2): 93-97

[21] WANG De-ming, WANG He-tang, ZHANG Yi, XU Chao-hang, WANG Yong-yi, HE Fei, ZHU Xiao-long. A composite foaming agent used for dust suppression and its preparation method [P]. China Patent 2013103389040. 2013-08-06. (in Chinese)

[22] KudirkaA A, DecosterM A. Jet pump cavitation with ambient and high temperature water [J]. Journal of Fluids Engineering, 1979, 101(1): 93-99

[23] LongX, YaoH, ZhaoJ. Investigation on mechanism of critical cavitating flow in liquid jet pumps under operating limits [J]. International Journal of Heat and Mass Transfer, 2009, 52(9): 2415-2420

[24] WangH-t, WangD-m, RenW-x, LuX-x, HanF-w, ZhangY-kun. Application of foam to suppress rock dust in a large cross-section rock roadway driven with roadheader [J]. Advanced Powder Technology, 2013, 24(1): 257-262