Fabrication of micro-flow channels on graphite composite bipolar plates using microplaning

Abstract

A new method of manufacturing micro-flow channels on graphite composite bipolar plate (GCBPP) microplaning using specially designed multi-tooth tool is proposed. In this method, several or even dozens of parallel micro-flow channels ranging from 100 µm to 500 µm in width can be produced simultaneously. But, edge chippings easily occur on the rib surface of GCBPP during microplaning due to brittleness of graphite composites. Experimental results show that edge chippings result in the increase of contact resistance between bipolar plate and carbon paper at low compaction force. While the edge chippings scarcely exert influence on the contact resistance at high compaction force. Contrary to conventional view, the edge chippings can significantly improve performance of microfuel cell and big edge chippings outperform small edge chippings. In addition, the influence of technical parameters on edge chippings was investigated in order to obtain big, but not oversized edge chippings.

Keywords

microfuel cell / graphite composite bipolar plate / micro-flow channel / microplaning / edge chipping

References

[1] Journal of Fuel Cell Science and Technology, 2010, 7(6

[2] WilhelmA N, SurgenorB W, PharoahJ G. Design and evaluation of a micro-fuel-cell-based power system for a mobile robot [J]. IEEE/ASME Transactions on Mechatronics, 2006, 114): 471-476

[3] KunduA, JangJ H, GilJ H, JungC R, LeeH R, KimS H, KuB, OhY S. Micro-fuel cells: Current development and applications [J]. Journal of Power Sources, 2007, 170(1): 67-78

[4] TawfikH, HungY, MahajanD. Metal bipolar plates for PEM fuel cell—A review [J]. Journal of Power Sources, 2007, 163(2): 755-767

[5] ChoH, YunYH. Stainless steel bipolar plates deposited with multilayer films for PEMFC applications [J]. Journal of Materials Engineering and Performance, 2013, 22(8): 2411-2417

[6] AntunesR A, OliveiraM C L, EttG, EttV. Corrosion of metal bipolar plates for PEM fuel cells: A review [J]. International Journal of Hydrogen Energy, 2010, 35(8): 3632-3647

[7] KakatiB K, MohanV. Development of low-cost advanced composite bipolar plate for proton exchange membrane fuel cell [J]. Fuel Cells, 2008, 8(1): 45-51

[8] TuranC, CoraO N, KocM. Contact resistance characteristics of coated metallic bipolar plates for PEM fuel cells—Investigations on the effect of manufacturing [J]. International Journal of Hydrogen Energy, 2012, 37(23): 18187-18204

[9] YuJ-r, ChengP, MaZ-q, YiB-lian. Fabrication of miniature silicon wafer fuel cells with improved performance [J]. Journal of Power Sources, 2003, 124(1): 40-46

[10] KamitaniA, MorishitaS, KotakiH, ArscottS. Microfabricated microfluidic fuel cells [J]. Sensors and Actuators B: Chemical, 2011, 154(2): 174-180

[11] ZhangY, LuJ, ShimanoS, ZhouH-s, MaedaR. Development of MEMS-based direct methanol fuel cell with high power density using nanoimprint technology [J]. Electrochemistry Communications, 2007, 9(6): 1365-1368

[12] KakatiB K, SathiyamoorthyD, VermaA. Electrochemical and mechanical behavior of carbon composite bipolar plate for fuel cell [J]. International Journal of Hydrogen Energy, 2010, 35(9): 4185-4194

[13] ChenH, LiuH-b, TuW-m, YangL, HeY-de. Study on expanded graphite/phenolic resin carbon composite bipolar plate [J]. Journal of Central South University: Science and Technology, 2011, 42(11): 3326-3330

[14] GuoN N, LeuM C. Effect of different graphite materials on the electrical conductivity and flexural strength of bipolar plates fabricated using selective laser sintering [J]. International Journal of Hydrogen Energy, 2012, 37(4): 3558-3566

[15] LiK C, ZhangK, WuG Z. Fabrication of electrically conductive polymer composites for bipolar plate by two-Step compression molding technique [J]. Journal of Applied Polymer Science, 2013, 130(4): 2296-2302

[16] MullerA, KauranenP, GanskiA V, HellB. Injection moulding of graphite composite bipolar plates [J]. Journal of Power Sources, 2006, 154(2): 467-471

[17] DhakateS R, MathurR B, KakatiB K, DhamiT L. Properties of graphite-composite bipolar plate prepared by compression molding technique for PEM fuel cell [J]. International Journal of Hydrogen Energy, 2007, 32(17): 4537-4543

[18] ChaS W, O’HayreR, SaitoY, PrinzF B. The scaling behavior of flow patterns: A model investigation [J]. Journal of Power Sources, 2004, 134(1): 57-71