Normalization method for asphalt mixture fatigue equation under different loading frequencies

Song-tao Lü , Jian-long Zheng

Journal of Central South University ›› 2015, Vol. 22 ›› Issue (7) : 2761 -2767.

PDF
Journal of Central South University ›› 2015, Vol. 22 ›› Issue (7) : 2761 -2767. DOI: 10.1007/s11771-015-2806-1
Article

Normalization method for asphalt mixture fatigue equation under different loading frequencies

Author information +
History +
PDF

Abstract

In order to analyze the effect of different loading frequencies on the fatigue performance for asphalt mixture, the changing law of asphalt mixture strengths with loading speed was revealed by strength tests under different loading speeds. Fatigue equations of asphalt mixtures based on the nominal stress ratio and real stress ratio were established using fatigue tests under different loading frequencies. It was revealed that the strength of the asphalt mixture is affected by the loading speed greatly. It was also discovered that the fatigue equation based on the nominal stress ratio will change with the change of the fatigue loading speed. There is no uniqueness. But the fatigue equation based on the real stress ratio doesn’t change with the loading frequency. It has the uniqueness. The results indicate the fatigue equation based on the real stress ratio can realize the normalization of the asphalt mixture fatigue equation under different loading frequencies. It can greatly benefit the analysis of the fatigue characteristics under different vehicle speeds for asphalt pavement.

Keywords

road engineering / asphalt pavement / fatigue equation / loading speed / loading frequency / strength / stress ratio

Cite this article

Download citation ▾
Song-tao Lü, Jian-long Zheng. Normalization method for asphalt mixture fatigue equation under different loading frequencies. Journal of Central South University, 2015, 22(7): 2761-2767 DOI:10.1007/s11771-015-2806-1

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

SaadA Q, IbrahemS. Prediction of bituminous mixture fatigue life based on accumulated strain [J]. Construction and Building Materials, 2007, 21(6): 1370-1376

[2]

ShuX, HuangB-s, DragonV. Laboratory evaluation of fatigue characteristics of recycled asphalt mixture [J]. Construction and Building Materials, 2008, 22(7): 1323-1330

[3]

CastroM, SanchezJ A. Estimation of asphalt concrete fatigue curves-A damage theory approach [J]. Construction and Building Materials, 2008, 22(6): 1232-1238

[4]

LiQ, HyunJ L, TaeW K. A simple fatigue performance model of asphalt mixtures based on failure energy [J]. Construction and Building Materials, 2012, 27(1): 605-611

[5]

LiN, MolenaarA A A, van de VenM F C, WuS-peng. Characterization of fatigue performance of asphalt mixture using a new fatigue analysis approach [J]. Construction and Building Materials, 2013, 45(2): 45-52

[6]

GeZ-s, WangH, WangY-y, HuX-qian. Evaluating fatigue behavior of asphalt mixtures under alternate tension-compression loading model using new alternate biaxial splitting method [J]. Construction and Building Materials, 2014, 54(11): 106-112

[7]

AlirezaK K, MahmoudA. Laboratory evaluation of strain controlled fatigue criteria in hot mix asphalt [J]. Construction and Building Materials, 2013, 47(10): 1497-1502

[8]

ZoaA, FatimaA, ChristopheP, RobretM E. Fatigue life prediction of an asphalt pavement subjected to multiple axle loadings with viscoelastic FEM [J]. Construction and Building Materials, 2013, 43(6): 443-452

[9]

GhaziG A K, KhalidA G. The combined effect of loading frequency, temperature, and stress level on the fatigue life of asphalt paving mixtures using the IDT test configuration [J]. International Journal of Fatigue, 2014, 59(3): 254-261

[10]

JaeseungK, RandyC W. Application of the viscoelastic continuum damage model to the indirect tension test at a single temperature [J]. Journal of Engineering Mechanics, 2010, 36(4): 496-505

[11]

GonzalezJ M, MiquelC J, OllerS, MiroR. A viscoplastic constitutive creep model with strain rate variables for asphalt mixtures-numerical simulation [J]. Computational Materials Science, 2007, 38(4): 543-560

[12]

ArabaniM, KambooziaN. The linear visco-elastic behaviour of glasphalt mixture under dynamic loading conditions [J]. Construction and Building Materials, 2013, 41(2): 594-601

[13]

YouZ-p, SanjeevA, EminK M. Dynamic modulus simulation of the asphalt concrete using the X-ray computed tomography images [J]. Materials and Structures, 2009, 42(5): 617-630

[14]

LundstromR, IsacssonU, EkbladJ. Investigations of stiffness and fatigue properties of asphalt mixtures [J]. Journal of Materials Science, 2003, 38(24): 4941-4949

[15]

KechaoQ, ChenH-s, YeH-p, HongJ-x, SunW, JiangJ-yang. Thermo-mechanical coupling effect on fatigue behavior of cement asphalt mortar [J]. International Journal of Fatigue, 2013, 51(2): 116-120

[16]

YongR K, HyunJ L. Evaluation of the effect of aging on mechanical and fatigue properties of sand asphalt mixtures [J]. KSCE Journal of Civil Engineering, 2013, 7(4): 389-398

[17]

YeQ-s, WuS-p, LiNing. Investigation of the dynamic and fatigue properties of fiber-modified asphalt mixtures [J]. International Journal of Fatigue, 2009, 31(10): 1598-1602

[18]

TaeW K, JongeunB, HyunJ L, ChoiJ Y. Fatigue performance evaluation of SBS modified mastic asphalt mixtures [J]. Construction and Building Materials, 2013, 48(11): 908-916

AI Summary AI Mindmap
PDF

90

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/