Longitudinal force in continuously welded rail on long-span tied arch continuous bridge carrying multiple tracks
Bin Yan , Gong-lian Dai , Wen-hua Guo , Qing-yuan Xu
Journal of Central South University ›› 2015, Vol. 22 ›› Issue (5) : 2001 -2006.
Considering arch rib, lateral brace, suspender, girder, pier and track position, the model for the interaction between long-span tied arch continuous bridge and multiple tracks was established by using steel-concrete composite section beam element to simulate concrete-filled steel tube (CFST) arch rib, using the beam element with rigid arm to simulate the prestressed concrete girder and using nonlinear bar element to simulate longitudinal constraint between track and bridge. Taking a (77+3×156.8+77) m tied arch continuous bridge with four tracks on the Harbin-Qiqihar Passenger Dedicated Line as an example, the arrangement of continuously welded rail (CWR) was explored. The longitudinal force in CWR on the tied arch continuous bridge, the pier top horizontal force and torque due to the unbalance load case, were analyzed under the action of temperature, vertical live load, train braking and wind load. Studies show that, it can significantly reduce track displacement to set the track expansion devices at main span arch springing on both sides; the track stress due to arch temperature variation can reach 40.8 MPa; the track stress, pier top horizontal force and torque are related to the number of loaded tracks and train running direction, and the bending force applied to unloaded track is close to the loaded track, while the braking force applied to unloaded track is 1/4 to 1/2 of the loaded track; the longitudinal force of track due to the wind load is up to 12.4 MPa, which should be considered.
railroad bridge / long-span bridge / tied arch continuous beam / continuously welded rail / track-bridge interaction
| [1] |
|
| [2] |
|
| [3] |
|
| [4] |
|
| [5] |
|
| [6] |
|
| [7] |
|
| [8] |
|
| [9] |
European Committee for Standardization.BS EN 1991-2: 2003. Eurocaode 1: Actions on structures-Part 2: Traffic loads on bridges [S], 2003 |
| [10] |
Union Interationale Des Chemins De Fer U.UIC 774-3 Track/bridge interaction. Recommendations for calculations [S], 2001ParisInternational Union of Railways |
| [11] |
|
| [12] |
|
| [13] |
TB 10015-2012.Code for design of railway continuously welded rail [S], 2013BeijingChina Railway Publishing House |
| [14] |
TB 10621-2009.Code for design of high speed railway [S], 2010BeijingChina Railway Publishing House |
| [15] |
TB10002. 1-2005.Fundamental code of design on railway bridge and culvert [S], 2005BeijingChina Railway Publishing House |
/
| 〈 |
|
〉 |