Influence of confining stress on fracture characteristics and cutting efficiency of TBM cutters conducted on soft and hard rock

Abstract

Combined with numerical simulation, the influence of confining stress on cutting process, fracture conditions and cutting efficiencies of soft and hard rock has been conducted on the triaxial testing machine (TRW-3000) designed and manufactured in Central South University (China). Results are obtained by performing analysis on the fracture scopes of cement and granite plates, the characteristics of cutting force in cutting processes and the cutting efficiency. Firstly, the increase of latitude fracture scope and the decrease of longitude fracture scope are both more notable in the tests conducted on cement plates subjected to the increasing confining stresses; secondly, the increase tendency of peak penetration forces obtained from tests conducted on granite plates is more obvious, however, the increase tendencies of average penetration forces achieved from cement and granite plates are close to each other; thirdly, the cutting efficiency could be improved by increasing the spacing between cutters when the confining stress which acts on soft and hard rock increases in a certain degree, and the cutting efficiency of soft rock is more sensitive to the varying confining stresses.

Keywords

triaxial testing machine / numerical study / tunnel boring machine (TBM) cutter / confining stress / soft and hard rock / cutting efficiency

References

[1] XiaY-m, OuyangT, ZhangX-m, LuoD-zhi. Mechanical model of breaking rock and force characteristic of disc cutter [J]. Journal of Central South University, 2012, 19: 1846-1852

[2] WangS Y, SloanS W, LiuH Y, TangC A. Numerical simulation of the rock fragmentation process induced by two drill bits subjected to static and dynamic (impact) loading [J]. International Journal of Rock Mechanics and Mining Sciences, 2011, 44: 317-332

[3] MaH-s, JiH-guang. Experimental study of the effect of joint orientation on fragmentation modes and penetration rate under TBM disc cutters [J]. Chinese Journal of Rock Mechanics and Engineering, 2011155-163

[4] PangS S, GoldsmithW, HoodM. A force-indentation model for brittle rocks [J]. Rock Mechanics and Rock Engineering, 1989, 22(2): 127-148

[5] KhalafF, AbouzeidA M. Analogy between indentation and blasting tests on brittle rocks [J]. Rock mechanics, 1980, 13(2): 99-117

[6] LindqvistP. Stress fields and subsurface crack propagation of single and multiple rock indentation and disc cutting [J]. Rock Mechanics and Rock Engineering, 1984, 17(2): 97-112

[7] GoldsmithW, WuW. Response of rocks to impact loading by bars with pointed ends [J]. Rock Mechanics, 1981, 13(3): 157-184

[8] SuL-j, SunJ-s, LuW-bo. Research on numerical simulation of rock fragmentation by TBM cutters using particle flow method [J]. Rock and Soil Mechanics, 2009, 30(9): 2823-2829

[9] SunJ-s, ChenM, ChenB-g, LuW-b, ZhouC-bo. Numerical simulation of influence factors for rock fragmentation by TBM cutters [J]. Rock and Soil Mechanics, 20111891-1897

[10] GongQ-m, SheQ-r, HouZ-s, JiangH-t, PengQi. Experimental study of TBM penetration in marble rock mass under high geostress [J]. Chinese Journal of Rock Mechanics and Engineering, 20102522-2532

[11] GongQ M, YinL J, SheQ R. TBM tunneling in marble rock masses with high in situ stress and large groundwater inflow: A case study in China [J]. Bulletin of Engineering Geology and the Environment, 2013, 72(2): 163-172

[12] MaH-s, YinL-j, JiH-guang. Numerical study of the effect of confining stress on rock fragmentation by TBM cutters [J]. International Journal of Rock Mechanics and Mining Science, 2011, 48: 2021-1033

[13] ZhangK, XiaY-m, TanQ, ZhouZ-long. Numerical study on modes of breaking rock by TBM cutter under different confing pressures [J]. Chinese Journal of Geotechnical Engineering, 20101780-1787

[14] WangW-xingRock mechanics [M], 2004ChangshaCentral South University Press30-42

[15] MoonT, NakagawaM, BergerJ. Measurement of fracture toughness using the distinct element method [J]. International Journal of Rock Mechanics and Mining Science, 2007, 44: 449-456

[16] YoonJ S. Application of experimental design and optimization to PFC model calibration in uniaxial compression simulation [J]. International Journal of Rock Mechanics and Mining Science, 2007, 44: 871-889