Thickness distribution of multi-stage incremental forming with different forming stages and angle intervals

Abstract

Although multi-stage incremental sheet forming has always been adopted instead of single-stage forming to form parts with a steep wall angle or to achieve a high forming performance, it is largely dependent on empirical designs. In order to research multi-stage forming further, the effect of forming stages (n) and angle interval between the two adjacent stages (Δα) on thickness distribution was investigated. Firstly, a finite element method (FEM) model of multi-stage incremental forming was established and experimentally verified. Then, based on the proposed simulation model, different strategies were adopted to form a frustum of cone with wall angle of 30° to research the thickness distribution of multi-pass forming. It is proved that the minimum thickness increases largely and the variance of sheet thickness decreases significantly as the value of n grows. Further, with the increase of Δα, the minimum thickness increases initially and then decreases, and the optimal thickness distribution is achieved with Δα of 10°. Additionally, a formula is deduced to estimate the sheet thickness after multi-stage forming and proved to be effective. And the simulation results fit well with the experimental results.

Keywords

incremental forming / multi-stage forming / angle interval / thickness distribution

References

[1] CerroI, MaidaganE, AranaJ, RiveroA, RodriguezP P. Theoretical and experimental analysis of the dieless incremental sheet forming process [J]. Journal of Materials Processing Technology, 2006, 177(1/2/3): 404-408

[2] JeswietJ, MicariF, HirtG, BramleyA, DuflouJ, AllwoodJ. Asymmetric single point incremental forming of sheet metal [J]. Cirp Annals-Manufacturing Technology, 2005, 54(2): 623-649

[3] FiliceL, AmbrogioG, GaudiosoM. Optimised tool-path design to reduce thinning in incremental sheet forming process [J]. International Journal of Material Forming, 2013, 6(1): 173-178

[4] AlesP, KarlK. Backward hole-flanging technology using an incremental approach [J]. Journal of Mechanical Engineering, 2012, 58(2): 73-80

[5] KimY, ParkJ. Effect of process parameters on formability in incremental forming of sheet metal [J]. Journal of Materials Processing Technology, 2002, 130(20): 42-46

[6] SilvaM B, MartinsP A F. Two-point incremental forming with partial die: Theory and experimentation [J]. Journal of Materials Engineering and Performance, 2012, 22(4): 1018-1027

[7] HanF, MoJ-h, GongP, LiMin. Method of closed loop springback compensation for incremental sheet forming process [J]. Journal of Central South University of Technology, 2011, 18: 1509-1517

[8] MalhotramR, BhattacharyaA, KumarA, ReddyN V, CaoJ. A new methodology for multi-pass single point incremental forming with mixed toolpaths [J]. CIRP Annals-Manufacturing Technology, 2011, 60(1): 323-326

[9] SkjoedtM, SilvaM B, MartinsP A F, BayN. Strategies and limits in multi-stage single-point incremental forming [J]. Journal of Strain Analysis for Engineering Design, 2010, 45(1): 33-44

[10] BambachM, AraghiT B, HirtG. Strategies to improve the geometric accuracy in asymmetric single point incremental forming [J]. Production Engineering, 2009, 3(2): 145-156

[11] VerbertJ, BelkassemB, HenrardC, HabrakenA M, GuJ, SolH, LauwersB, DuflouJ R. Multi-step toolpath approach to overcome forming limitations in single point incremental forming [J]. International Journal of Material Forming, 20081203-1206

[12] LiuZ-b, LiY-l, MeehanP A. Vertical wall formation and material flow control for incremental sheet forming by revisiting multistage deformation path strategies [J]. Materials and Manufacturing Processes, 2013, 28(5): 562-571

[13] DuflouJ R, VerbertJ, BelkassemB, GuJ, SolH, HenrardC, HabrakenA M. Process window enhancement for single point incremental forming through multi-step toolpaths [J]. CIRP Annals-Manufacturing Technology, 2008, 57(1): 253-256

[14] KimT J, YangD Y. Improvement of formability for the incremental sheet metal forming process [J]. International Journal of Mechanical Sciences, 2000, 42(7): 1271-1286

[15] LiJ-c, LiC, ZhouT-gui. Thickness distribution and mechanical property of sheet metal incremental forming based on numerical simulation [J]. Transactions of Nonferrous Metals Society of China, 2012, 22: s54-s60

[16] LiJ-c, HuJ-b, PanJ-j, GengPei. Thickness distribution and design of a multi-stage process for sheet metal incremental forming [J]. International Journal of Advanced Manufacturing Technology, 2012, 62(9/10/11/12): 981-988

[17] YoungD, JeswietJ. Wall thickness variations in single-point incremental forming [J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2004, 218(11): 1453-1459