Determination of interference fit value on entire roller embedded shapemeter roll

Abstract

For entire roller embedded shapemeter roll, the relationship between the value of interference fit and the sensor pre-pressure, and the pressure transfer performance of shapemeter roll were analyzed by elasticity theory during the cold reversible rolling process. Considering the influence of strip temperature on the interference fit, the distributions of contact pressure of the framework’s top surface and the sensor pre-pressure on different values of interference fit were analyzed by the finite element technology. The results show that the contact pressure of the framework’s top surface and the sensor pre-pressure increase with the increase of the value of interference fit. When the value of interference fit is between 0.05 mm and 0.09 mm, roll body’s inner hole surface, the framework and pressure magnetic sensitive component don’t separate from each other, and the sensor works in the linear segment of characteristic curve, so the normal operation of shapemeter roll is guaranteed.

Keywords

reversible rolling / shapemeter roll / value of interference fit / contact pressure / finite element

References

[1] LiuH-m, YangL-p, YuB-qiangEntire roller seamless wireless shapemeter [P], 2010

[2] YangB, PengJ-h, ShengHui. Acid-pickling plates and strips speed control system by microwave heating based on self-adaptive fuzzy PID algorithm [J]. Journal of Central South University, 2012, 19(8): 2179-2186

[3] YuB-q, SunY-b, LiuH-min. Compensation model for shape measuring of cold strip rolling [J]. Journal of Iron and Steel Research (International), 2010, 17(6): 21-26

[4] YuB-qiangResearch on entire roller intelligence cold strip shape meter and its industrial application [D], 2010, Qinhuangdao, Yanshan University

[5] YuB-q, YangL-p, SunJ-liang. Research status of shape detecting roller of cold rolled strip [J]. Steel Rolling, 2011, 282: 44-46

[6] YangG-tongElasticity [M], 2011, Beijing, Higher Education Press

[7] ZhangY Q, LuY, MaG W. Effect of compressive axial load on forced transverse vibration of a double beam system [J]. Internal Journal of Mechanical Sciences, 2007, 27: 1-7

[8] YouLeiResearch on cold-strip steel shape measuring roll [D], 2009, Qinhuangdao, Yanshan University

[9] TrumanC E, BookerJ D. Analysis of a shrink-fit failure on a gear hub/shaft assembly [J]. Engineering Failure Analysis, 2007, 14(4): 557-572

[10] YangL-p, YuB-q, DingD, LiuH-min. Industrial shape detecting system of cold rolling strip [J]. Journal of Central South University, 2012, 19(4): 994-1001

[11] ChenD-c, ShangS-p, ZhangC-qiang. Effect of vertical load difference on cracking behaviors in multistory masonry buildings and numerical simulation [J]. Journal of Central South University of Technology, 2009, 16(6): 1014-1021

[12] TsengA A, TongaS X, ChenT C. Thermal expansion and crown evaluations in rolling process [J]. Material and Design, 1997, 18(1): 29-41

[13] PellizzariM, CescatoD. Hot friction and wear behaviour of high speed steel and high chromium iron rolls [J]. Wear, 2009, 267(4): 467-475

[14] FengM-j, JiHui. Numerical simulation on unsteady state temperature field of high speed steel composite roll during continuous hot slab rolling [J]. Journal of Central South University: Science and Technology, 2006, 37(5): 837-840

[15] WuH-m, LiuH-min. Study on design parameters of whole-roll shape detecting roll [C]. 2nd International Symposium on Advanced Rolling Equipment Technologies (ISARET2012), 2012, Beijing, China, ISARET: 328-333

[16] YuB-q, YangL-p, LiuH-min. Development and industry application of contact shape meter with new structure [J]. Chinese Journal of Scientific Instrument, 2010, 31(4): 904-911