Improvement of light uniformity by lighting arrangement for standardized crop production

Abstract

In a commercialized, fully artificial plant factory, artificial luminaire is arranged in a unified way using a general illumination theory, an actual measurement, or an empirical methodology. However, with these methods, lightings are implemented without considering specific optical characteristics of lighting or material characteristics of each component that constructs a cultivation system, resulting in an amount of light that becomes irregular. The amount of lighting is closely related with the growth and quality of crops, and the deviation between points where cultivated crops are located causes quality difference in the produced crops, thus impairing the economic feasibility of a plant factory. In this regard, a simulation to figure out an optimum lighting layout was performed. Arrangements based on the spectrum distribution of light source and reflector materials were implemented to ascertain the distance between lighting and height of lighting and gather information in the pre-treatment process to improve the uniformity of light in the plant cultivation system. Improvement of around 15% in light uniformity is achieved compared with the existing system after the simulation is carried out. This result would reduce the deviation in crop growth to make uniform quality crop production possible.

Keywords

high-quality crop / light uniformity improvement / optimal lighting layout / fully artificial plant factory / Relux simulation

References

[1] PinhoP, HytonenT, RantanenM, ElomaaP, HalonenL. Dynamic control of supplemental lighting intensity in a greenhouse environment [EJ/OL]. Lighting Research & Technology, 2012

[2] KimJ H. Trends and prospects of plant factory [R]. Korea Rural Economic Institute, 200930

[3] YehN, ChungJ P. High-brightness LEDs-energy efficient lighting sources and their potential in indoor plant cultivation [J]. Renewable and Sustainable Energy Reviews, 2009, 13: 2175-2180

[4] PinhoP, JokinenK, HalonenL. Horticultural lighting-present and future challenges [J]. Lighting Research & Technology, 2012, 4: 427-437

[5] LimS T, YangS RIs plant factory a sustainable alternative? [R], 2011

[6] KjaerK H, OttosenC O, JorgensenB N. Cost-efficient light control for production of two campanula species [J]. Scientia Horticulturae, 2011, 129: 825-831

[7] LeeH S, KwonS Y, LimJ H. Optimal layout simulation and verification of LED lighting for improvement of light uniformity in plant factory [J]. Journal of Korean Computer Congress, 2012, 39: 381-383

[8] KwonS Y, LimJ H. A study about improvement of energy efficiency in plant cultivation system based on USN [J]. Journal of Korean Society for Internet Information, 2011, 39: 411-412

[9] The Illuminating Engineering Institute of Japan. Lighting handbook [M]. Paju-si: Sungandang, 2010: 101, 105. (in Korean)

[10] LiD H W, LauS C, LamJ C. Predicting daylight illuminance by computer simulation techniques [J]. Lighting Research and Technology, 2004, 2: 113-128

[11] HongS D. Lighting simulation using relux [J]. Journal of the Korean Digital Architecture and Interior Association, 2011, 11: 83-90

[12] SeoS K, GangS W, BaekJ P, KimS H, ParkK W, LeeY BPlant factory [M], 2008, Seoul, WorldScience Co

[13] FuW, LiP, WuY. Effects of different light intensities on chlorophyll fluorescence characteristics and yield in lettuce [J]. Scientia Horticulturae, 2012, 135: 45-51

[14] KimH J, AnA H. Study of yield method including artificial lighting uniformity ratio in interior space [J]. The Korean Institute of Illuminating and Electrical Installation Engineers, 1999, 13: 7-11

[15] ChoiH G, KangT E, ChoiB SLighting fixtures and design [M], 20042nd edSeoul, Sungandang: 4-9