Numerical simulation on effects of embedded crack on rock fragmentation by a tunnel boring machine cutter

Abstract

Based on the simplification of cutting process, a series of numerical simulations were conducted using a 2-D discrete element method to explore the effects of embedded cracks with different dip angles on the rock fragmentation process, cutting characteristics and breaking efficiency. The results show that the simulated results are in a good agreement with previous theoretical study. The main crack propagates to the top tip of embedded crack, except when the dip angle is 90°. Side cracks which are more fully developed in the rocks containing embedded cracks tend to propagate towards the free surface. According to the history of vertical cutting force, it is shown that the peak force is decreased by embedded cracks. The study on cutting efficiency was conducted by combining the quantity of crack and cutting energy. And the results show that breaking efficiency can be treated as a decreasing or a increasing function when the dip angle is less or larger than 30°, respectively. Breaking efficiency is higher than that in intact rock when the dip angle is larger than 45°.

Keywords

numerical simulation / embedded crack / rock fragmentation / breaking efficiency

References

[1] MrouehH, ShahrourI. A simplified 3D model for tunnel construction using tunnel boring machines [J]. Tunneling and Underground Space Technology, 2008, 23(1): 38-45

[2] WeiJ, SunQ-c, SunW, DingXin. Load-sharing characteristic of multiple pinions driving in tunneling boring machine [J]. Chinese Journal of Mechanical Engineering, 2013, 26(3): 532-539

[3] XiaY-m, OuyangT, ZhangX-m, LuoD-zhi. Mechanical model of breaking rock and force characteristic of disc cutter [J]. Journal of Central South University, 2012, 19: 1846-1852

[4] GongQ M, YinL J, SheQ R. TBM tunneling in marble rock masses with high in situ stress and large groundwater inflow: A case study in China [J]. Bull Eng Geol Environ, 2013, 72: 163-172

[5] MaH-s, YinL-j, JiH-guang. Numerical study of the effect of confining stress on rock fragmentation by TBM cutters [J]. International Journal of Rock Mechanics & Mining Sciences, 2011, 48: 1021-1033

[6] WangS Y, SloanS W, LiuH Y, TangC A. Numerical simulation of the rock fragmentation process induced by two drill bits subjected to static and dynamic (impact) loading [J]. International Journal of Rock Mechanics and Mining Sciences, 2011, 44: 317-332

[7] BrulandAHard rock tunnel boring [D], 1998, Singapore, Nanyang University of Science and Technology

[8] KazemO. Assessing Prediction models of advance rate in tunnel boring machines-a case study in Iran [J]. Arabia Journal of Geology Science, 2013, 6: 481-489

[9] GongQ M, JianZ, JiaoY-yong. Numerical modeling of the effects of joint orientation on rock fragmentation by TBM cutters [J]. Tunneling and Underground Space technology, 2005, 20: 183-191

[10] MaH-s, JiH-guang. Experimental study of the effect of joint orientation on fragmentation modes and penetration rate under TBM disc cutters [J]. Chinese Journal of Rock Mechanics and Engineering, 2011, 30(1): 155-163

[11] LiY-p, WangY-h, ChenL-z, YuF, LiL-hui. Experimental research on pre-existing cracks in marble under compression [J]. Chinese Journal of Geotechnical Engineering, 2004, 26(1): 120-124

[12] AlehosseinH, DetournayE, HuangH. An analytical model for the indentation of rocks by blunt tools [J]. Rock Mechanics and Rock Engineering, 2000, 33(4): 267-284

[13] ChengJ, ZhaoS-shanFracture mechanics [M], 2006, Beijing, Science Education Press: 9-11

[14] ChenaL H, LabuzbJ F. Indentation of rock by wedge-shaped tools [J]. International Journal of Rock Mechanics and Mining Sciences, 2006, 42: 1023-1033

[15] TanQ, YiN-e, XiaY-min. Research on rock dynamic fragmentation characteristics by TBM cutters and cutter spacing optimization [J]. Chinese Journal of Rock Mechanics and Engineering, 2012, 31(12): 2453-2464

[16] BartoNTBM tunneling in jointed and faulted rock [M], 2009, Beijing, China Architecture & Building Press: 30-36