Numerical investigation of water-entry of flatted-bottom seafloor mining tool in ocean waves

Abstract

A numerical wave load model based on two-phase (water-air) Reynolds-Averaged Navier Stokes (RANS) type equations is used to evaluate hydrodynamic forces exerted on flatted-bottom seafloor mining tool during its entering ocean waves of deploying process. The discretization of the RANS equations is achieved by a finite volume approach (FV). The volume of fluid method (VOF) is employed to track the complicated free surface. A numerical wave tank is built to generate the ocean waves which are suitable for deploying seafloor mining tool. A typical deploying condition is employed to reflect the process of flatted-bottom body impacting with waves, and the pressure distribution of bottom is also presented. Four different lowering velocities are applied to obtain the time histories of maximum pressure of bottom, and it can be concluded that the pressure coefficient decreases with water velocity increasing, which is similar with ordinary water entry case. The numerical results clearly demonstrate the characteristics of flatted-bottom body entering ocean waves.

Keywords

flatted-bottom body / water entry / numerical wave tank / deployment / slamming load

References

[1] DaiY, LiuS-jun. Theoretical design and dynamic simulation of new mining paths of tracked miner on deep seafloor [J]. Journal of Central South University, 2013, 20(4): 918-923

[2] DNV-RP-H103. Recommended practice: Modelling and analysis of marine operations [S].

[3] BaarholmR, FaltinsenO M. Wave impact underneath horizontal decks [J]. Journal of Marine Science Technology, 2004, 9(1): 1-13

[4] BunnikT, BuchnerB. Numerical prediction of wave loads on subsea structures in the splash zone [C]. Proceedings of the 14th International Offshore and Polar Engineering Conference (ISOPE), 2004, Toulon, ISOPE: 284-290

[5] SarkarA, GudmestadO T. Splash zone lifting analysis of subsea structures [C]. Proceedings of the AMSE 29th International Conference on Ocean, Offshore and Arctic Engineering (OMAE), 2010, Shanghai, OMAE: 303-312

[6] ZhangJ-y, LiD-j, GaoX-y, MengQ-c, YangC-j, ChenYing. Simulation analysis of deployment and retrieval of junction box used in cabled seafloor observatory [J]. Ship Engineering, 2010, 32(6): 53-59

[7] WangW-h, WangY-ying. An essential solution of water entry problems and its engineering applications [J]. Journal of Marine Science and Application, 2010, 9(3): 268-273

[8] LinP, LiuP L. Internal wave-maker for Navier-Stokes equations models [J]. Journal of Waterway, Port, Coastal, and Ocean Engineering, 1999, 125(4): 207-215

[9] TangH-J, HuangC-C, ChenW-Ming. Dynamics of dual pontoon floating structure for cage aquaculture in a two-dimensional numerical wave tank [J]. Journal of Fluids and Structures, 2011, 27(7): 918-936

[10] YangZ-w, LiuS-x, BinghamH B, LiJ-xuan. Second-order theory for coupling 2D numerical and physical wave tanks: Derivation, evaluation and experimental validation [J]. Coastal Engineering, 2013, 71(1): 37-51

[11] AnbarsoozM, Passandideh-fardM, MoghimanM. Fully nonlinear viscous wave generation in numerical wave tanks [J]. Ocean Engineering, 2013, 59: 73-85

[12] ChoiJ-w, YoonS-bum. Numerical simulations using momentum source wave-maker applied to RANS equation model [J]. Coastal Engineering, 2009, 56(10): 1043-1060

[13] SenturkU. Modeling nonlinear waves in a numerical wave tank with localized mesh-less RBF method [J]. Computers & Fluids, 2011, 44(1): 221-228

[14] WestphalenJ, GreavesD M, WilliamsC J K, Hunt-RabyA C, ZangJ. Focused waves and wave-structure interaction in a numerical wave tank [J]. Ocean Engineering, 2012, 45: 9-21

[15] HuX-z, LiuS-j, LiYan. 2D numerical wave tank simulation for deployment of seafloor mining system [J]. Journal of Central South University^(Science and Technology), 2011, 42(Suppl.2): 246-251

[16] HuX-z, LiuS-jun. Numerical simulation of calm water entry of flatted-bottom seafloor mining tool [J]. Journal of Central South University, 2011, 18(3): 658-665

[17] FaltinsenO MSea loads on ships and offshore structure [M], 1993, Cambridge, Cambridge university press: 23-27

[18] HuX-z, LiuS-jun. Numerical simulation of water entry of seafloor mining tool with free fall motion [J]. International Journal of Fluid Mechanics Research, 2011, 38(3): 193-214